View Full Version : increasing graphics memory
owais javaid
May 2nd 08, 07:15 PM
MY GRAPHICS DRIVER REPORT GOES AS UNDER.........................
Driver Version: 6.14.10.4764
Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 247 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 128 MB
Graphics Memory in Use: 9 MB
Processor: x86
Processor Speed: 3065 MHZ
Device Revision: 04
Accelerator in Use: Intel(R) 82915G/GV/910GL Express Chipset Family
Video BIOS: 3402
NOW IF MY GRAPHICS MEMORY IS 128 MB, WHY IS ONLY 9 MB IN USE??
HOW CAN I INCREASE IT TO MAXIMUM?????
Cari \(MS-MVP\)
May 2nd 08, 09:32 PM
It sounds like this is an integrated graphics card, therefore you should
change the amount of memory allocated to the card in the BIOS.
--
Cari (MS-MVP) Printing & Imaging
www.coribright.com/windows
"owais javaid" > wrote in message
...
>
> MY GRAPHICS DRIVER REPORT GOES AS UNDER.........................
>
> Driver Version: 6.14.10.4764
> Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)
> Default Language: English
> DirectX* Version: 9.0
> Physical Memory: 247 MB
> Minimum Graphics Memory: 8 MB
> Maximum Graphics Memory: 128 MB
> Graphics Memory in Use: 9 MB
> Processor: x86
> Processor Speed: 3065 MHZ
> Device Revision: 04
> Accelerator in Use: Intel(R) 82915G/GV/910GL Express Chipset Family
> Video BIOS: 3402
>
>
> NOW IF MY GRAPHICS MEMORY IS 128 MB, WHY IS ONLY 9 MB IN USE??
> HOW CAN I INCREASE IT TO MAXIMUM?????
>
>
>
>
> --
> owais javaid
Andrew E.
May 4th 08, 05:39 AM
With integrated video thier is a trick to it when a video adapter is added to
the pc...First install the on-board video using intels chipset installation
utility
& the graphic drivers,etc.Once up & running,open device mgr,expand the
display
tree,R.click,select uninstall,do not restart pc,once thru,close
out,shutdown pc.
Power off,install video card,start pc,adjust BIOS for card,leave on board
active,
boot to xp.In xp,install card drivers/software,once thru w/o restarting,open
device mgr,re-uninstall board graphics,close,restart pc...Now both are
working
for you...
"owais javaid" wrote:
>
> MY GRAPHICS DRIVER REPORT GOES AS UNDER.........................
>
> Driver Version: 6.14.10.4764
> Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)
> Default Language: English
> DirectX* Version: 9.0
> Physical Memory: 247 MB
> Minimum Graphics Memory: 8 MB
> Maximum Graphics Memory: 128 MB
> Graphics Memory in Use: 9 MB
> Processor: x86
> Processor Speed: 3065 MHZ
> Device Revision: 04
> Accelerator in Use: Intel(R) 82915G/GV/910GL Express Chipset Family
> Video BIOS: 3402
>
>
> NOW IF MY GRAPHICS MEMORY IS 128 MB, WHY IS ONLY 9 MB IN USE??
> HOW CAN I INCREASE IT TO MAXIMUM?????
>
>
>
>
> --
> owais javaid
>
vBulletin® v3.6.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.