Bob F[_2_]
November 21st 15, 03:56 AM
wrote:
> My 2 TB Win XP disk is almost full, so I've been trying to transfer
> the content to a new 3TB disk. I first used Paragon Hard Disk Manager
> 2009 Suite but it failed to recognize its partitions (all red marked).
> Then, thinking this version was not desined to handle a disk larger
> than 2TB, I bought Paragon Hard Disk Manager 15 Suite. The cloning
> process was completed on the screen. When I started the computer, it
> showed boot menu so I chose Normally, but as soon as Win XP logo
> appeared it crashed and restarted. If I chose Safe Mode, the result is
> the same. Finally, I downlorded Clonezilla Live and used its Default
> setting. Everything appeared normal. But when the computer started,
> the result was exactly same as with Paragone.
> It seems that, because booting happens up to Win XP logo appears,
> failure may have something to do with MBR. During cloning with
> Clonezilla, MBR must change to GUID.Perhaps my MOB (Gigabyte B75M-D3H
> and Asus P8Z77-V Pro) cann not boot 3TB disk?
> I do not want to switch to Win 7 or above, if this is the problem.
> Your help will be most appreciated.
I don't think XP handles 3GB drives without changes. One possibility is to
partition the drive into 2 or more, so no partition is over 2,2 TB
Or
http://www.ghacks.net/2010/11/04/how-to-use-3tb-hard-drives-on-windows-xp/
> My 2 TB Win XP disk is almost full, so I've been trying to transfer
> the content to a new 3TB disk. I first used Paragon Hard Disk Manager
> 2009 Suite but it failed to recognize its partitions (all red marked).
> Then, thinking this version was not desined to handle a disk larger
> than 2TB, I bought Paragon Hard Disk Manager 15 Suite. The cloning
> process was completed on the screen. When I started the computer, it
> showed boot menu so I chose Normally, but as soon as Win XP logo
> appeared it crashed and restarted. If I chose Safe Mode, the result is
> the same. Finally, I downlorded Clonezilla Live and used its Default
> setting. Everything appeared normal. But when the computer started,
> the result was exactly same as with Paragone.
> It seems that, because booting happens up to Win XP logo appears,
> failure may have something to do with MBR. During cloning with
> Clonezilla, MBR must change to GUID.Perhaps my MOB (Gigabyte B75M-D3H
> and Asus P8Z77-V Pro) cann not boot 3TB disk?
> I do not want to switch to Win 7 or above, if this is the problem.
> Your help will be most appreciated.
I don't think XP handles 3GB drives without changes. One possibility is to
partition the drive into 2 or more, so no partition is over 2,2 TB
Or
http://www.ghacks.net/2010/11/04/how-to-use-3tb-hard-drives-on-windows-xp/