Unable to run Windows XP Home

[Jason4]

After replacing my MB and Processor, Windows no longer
loads. I've tried Safe Mode, Last Known Good Config and
Normal. None work. A Blue screen with lots of text
appears for a brief second then the machine reboots and
the process starts all over again.

MB-AOpen AX4C Max
CPU-Intel P4 2.4GHz
RAM-2x256 DDR 2100 CL2
40GB WD HDD @ 100

Is my only solution to do a reinstall/repair of Windows?

[Jupiter Jones [MVP]]

Jason;
You just replaced the motherboard and processor, there is no Last
known good configuration, that applies to the old hardware.
You need to perform a Repair Installation to properly detect the new
hardware:
http://www.dougknox.com/xp/tips/xp_repair_install.htm

--
Jupiter Jones [MVP]
An easier way to read newsgroup messages:
http://www.microsoft.com/windowsxp/pro/using/newsgroups/setup.asp
Please respond to newsgroup only for everyone's benefit.


"Jason4" > wrote in message
...
> After replacing my MB and Processor, Windows no longer
> loads. I've tried Safe Mode, Last Known Good Config and
> Normal. None work. A Blue screen with lots of text
> appears for a brief second then the machine reboots and
> the process starts all over again.
>
> MB-AOpen AX4C Max
> CPU-Intel P4 2.4GHz
> RAM-2x256 DDR 2100 CL2
> 40GB WD HDD @ 100
>
> Is my only solution to do a reinstall/repair of Windows?