Nero 5.5

[Greg Matthews]

Hi,

I have just installed Nero 5.5 onto my computer. When first opening up the
program, I was not given the "Start Multisession disk" or "Continue
Multisession disk" options. If I use the Wizard option, the "Continue with
an existing data-CD(multi-session) option is greyed out. It does state:The
option to continue an existing CD is disabled, because you have selected the
image recorder. Select your real recorder by using the menu command 'CD
Recorder > 'Choose Recorder' to enable this feature. However, now in this
section, there is only an option titled 'Image Recorder' and no where for me
to unselect this or choose another option.

How can I get around this problem.

Thanks

Greg Matthews

[Len Segal]

Greg,

Why don't you go to Ahead's Website and DL/install the latest version first.
They are up to 5.5.10.15 now. This may solve your problem before spending
time on troubleshooting.

If it doesn't, then I suggest reposting a message as to problem, what steps
you took, and what the results were so someone can pickup from there.

--

Regards,
Len Segal, MCP
Microsoft - MVP
--------------
My reply address is intentionally wrong to reduce SPAM Email.
NOTE: We do not respond to unsolicited Email support questions,
please post questions in newsgroup.

"Greg Matthews" > wrote in message
...
> Hi,
>
> I have just installed Nero 5.5 onto my computer. When first opening up
> the
> program, I was not given the "Start Multisession disk" or "Continue
> Multisession disk" options. If I use the Wizard option, the "Continue
> with
> an existing data-CD(multi-session) option is greyed out. It does
> state:The
> option to continue an existing CD is disabled, because you have selected
> the
> image recorder. Select your real recorder by using the menu command 'CD
> Recorder > 'Choose Recorder' to enable this feature. However, now in this
> section, there is only an option titled 'Image Recorder' and no where for
> me
> to unselect this or choose another option.
>
> How can I get around this problem.
>
> Thanks
>
> Greg Matthews
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003

[Len Segal]

Greg,

Why don't you go to Ahead's Website and DL/install the latest version first.
They are up to 5.5.10.15 now. This may solve your problem before spending
time on troubleshooting.

If it doesn't, then I suggest reposting a message as to problem, what steps
you took, and what the results were so someone can pickup from there.

--

Regards,
Len Segal, MCP
Microsoft - MVP
--------------
My reply address is intentionally wrong to reduce SPAM Email.
NOTE: We do not respond to unsolicited Email support questions,
please post questions in newsgroup.

"Greg Matthews" > wrote in message
...
> Hi,
>
> I have just installed Nero 5.5 onto my computer. When first opening up
> the
> program, I was not given the "Start Multisession disk" or "Continue
> Multisession disk" options. If I use the Wizard option, the "Continue
> with
> an existing data-CD(multi-session) option is greyed out. It does
> state:The
> option to continue an existing CD is disabled, because you have selected
> the
> image recorder. Select your real recorder by using the menu command 'CD
> Recorder > 'Choose Recorder' to enable this feature. However, now in this
> section, there is only an option titled 'Image Recorder' and no where for
> me
> to unselect this or choose another option.
>
> How can I get around this problem.
>
> Thanks
>
> Greg Matthews
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003

[Terry]

The software is not recognizing the drive and/or cd. I had similar problem
with a bad drive.

"Greg Matthews" > wrote in message
...
> Hi,
>
> I have just installed Nero 5.5 onto my computer. When first opening up
the
> program, I was not given the "Start Multisession disk" or "Continue
> Multisession disk" options. If I use the Wizard option, the "Continue
with
> an existing data-CD(multi-session) option is greyed out. It does
state:The
> option to continue an existing CD is disabled, because you have selected
the
> image recorder. Select your real recorder by using the menu command 'CD
> Recorder > 'Choose Recorder' to enable this feature. However, now in this
> section, there is only an option titled 'Image Recorder' and no where for
me
> to unselect this or choose another option.
>
> How can I get around this problem.
>
> Thanks
>
> Greg Matthews
>
>

[Terry]

The software is not recognizing the drive and/or cd. I had similar problem
with a bad drive.

"Greg Matthews" > wrote in message
...
> Hi,
>
> I have just installed Nero 5.5 onto my computer. When first opening up
the
> program, I was not given the "Start Multisession disk" or "Continue
> Multisession disk" options. If I use the Wizard option, the "Continue
with
> an existing data-CD(multi-session) option is greyed out. It does
state:The
> option to continue an existing CD is disabled, because you have selected
the
> image recorder. Select your real recorder by using the menu command 'CD
> Recorder > 'Choose Recorder' to enable this feature. However, now in this
> section, there is only an option titled 'Image Recorder' and no where for
me
> to unselect this or choose another option.
>
> How can I get around this problem.
>
> Thanks
>
> Greg Matthews
>
>

[Greg Matthews]

Hi,

I took your advice and downloaded the latest available update for Nero, this
being 5.5.10.20. Installed ok, however, if I now try to select my CD-RW
from the available list, there is a cross over the Device I want to use,
ATAPI CD-RW, which doesn't let me choose this option. If I try, then check
OK, I get the message:Sorry this Nero version only support Plextor recorders
only. How can I progress from here?

Thanks

Greg Matthews

"Len Segal" > wrote in message
...
> Greg,
>
> Why don't you go to Ahead's Website and DL/install the latest version
first.
> They are up to 5.5.10.15 now. This may solve your problem before spending
> time on troubleshooting.
>
> If it doesn't, then I suggest reposting a message as to problem, what
steps
> you took, and what the results were so someone can pickup from there.
>
> --
>
> Regards,
> Len Segal, MCP
> Microsoft - MVP
> --------------
> My reply address is intentionally wrong to reduce SPAM Email.
> NOTE: We do not respond to unsolicited Email support questions,
> please post questions in newsgroup.
>
> "Greg Matthews" > wrote in message
> ...
> > Hi,
> >
> > I have just installed Nero 5.5 onto my computer. When first opening up
> > the
> > program, I was not given the "Start Multisession disk" or "Continue
> > Multisession disk" options. If I use the Wizard option, the "Continue
> > with
> > an existing data-CD(multi-session) option is greyed out. It does
> > state:The
> > option to continue an existing CD is disabled, because you have selected
> > the
> > image recorder. Select your real recorder by using the menu command 'CD
> > Recorder > 'Choose Recorder' to enable this feature. However, now in
this
> > section, there is only an option titled 'Image Recorder' and no where
for
> > me
> > to unselect this or choose another option.
> >
> > How can I get around this problem.
> >
> > Thanks
> >
> > Greg Matthews
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003
>
>

[Greg Matthews]

Hi,

I took your advice and downloaded the latest available update for Nero, this
being 5.5.10.20. Installed ok, however, if I now try to select my CD-RW
from the available list, there is a cross over the Device I want to use,
ATAPI CD-RW, which doesn't let me choose this option. If I try, then check
OK, I get the message:Sorry this Nero version only support Plextor recorders
only. How can I progress from here?

Thanks

Greg Matthews

"Len Segal" > wrote in message
...
> Greg,
>
> Why don't you go to Ahead's Website and DL/install the latest version
first.
> They are up to 5.5.10.15 now. This may solve your problem before spending
> time on troubleshooting.
>
> If it doesn't, then I suggest reposting a message as to problem, what
steps
> you took, and what the results were so someone can pickup from there.
>
> --
>
> Regards,
> Len Segal, MCP
> Microsoft - MVP
> --------------
> My reply address is intentionally wrong to reduce SPAM Email.
> NOTE: We do not respond to unsolicited Email support questions,
> please post questions in newsgroup.
>
> "Greg Matthews" > wrote in message
> ...
> > Hi,
> >
> > I have just installed Nero 5.5 onto my computer. When first opening up
> > the
> > program, I was not given the "Start Multisession disk" or "Continue
> > Multisession disk" options. If I use the Wizard option, the "Continue
> > with
> > an existing data-CD(multi-session) option is greyed out. It does
> > state:The
> > option to continue an existing CD is disabled, because you have selected
> > the
> > image recorder. Select your real recorder by using the menu command 'CD
> > Recorder > 'Choose Recorder' to enable this feature. However, now in
this
> > section, there is only an option titled 'Image Recorder' and no where
for
> > me
> > to unselect this or choose another option.
> >
> > How can I get around this problem.
> >
> > Thanks
> >
> > Greg Matthews
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.474 / Virus Database: 272 - Release Date: 4/18/2003
>
>

[Greg Matthews]

Ok, so did you manage to resolve this problem, and if so, how did you do
this?

"Terry" > wrote in message
...
> The software is not recognizing the drive and/or cd. I had similar problem
> with a bad drive.
>
> "Greg Matthews" > wrote in message
> ...
> > Hi,
> >
> > I have just installed Nero 5.5 onto my computer. When first opening up
> the
> > program, I was not given the "Start Multisession disk" or "Continue
> > Multisession disk" options. If I use the Wizard option, the "Continue
> with
> > an existing data-CD(multi-session) option is greyed out. It does
> state:The
> > option to continue an existing CD is disabled, because you have selected
> the
> > image recorder. Select your real recorder by using the menu command 'CD
> > Recorder > 'Choose Recorder' to enable this feature. However, now in
this
> > section, there is only an option titled 'Image Recorder' and no where
for
> me
> > to unselect this or choose another option.
> >
> > How can I get around this problem.
> >
> > Thanks
> >
> > Greg Matthews
> >
> >
>
>

[Greg Matthews]

Ok, so did you manage to resolve this problem, and if so, how did you do
this?

"Terry" > wrote in message
...
> The software is not recognizing the drive and/or cd. I had similar problem
> with a bad drive.
>
> "Greg Matthews" > wrote in message
> ...
> > Hi,
> >
> > I have just installed Nero 5.5 onto my computer. When first opening up
> the
> > program, I was not given the "Start Multisession disk" or "Continue
> > Multisession disk" options. If I use the Wizard option, the "Continue
> with
> > an existing data-CD(multi-session) option is greyed out. It does
> state:The
> > option to continue an existing CD is disabled, because you have selected
> the
> > image recorder. Select your real recorder by using the menu command 'CD
> > Recorder > 'Choose Recorder' to enable this feature. However, now in
this
> > section, there is only an option titled 'Image Recorder' and no where
for
> me
> > to unselect this or choose another option.
> >
> > How can I get around this problem.
> >
> > Thanks
> >
> > Greg Matthews
> >
> >
>
>

[Charles Tomaras]

"Greg Matthews" > wrote in message
...
> Hi,
>
> I took your advice and downloaded the latest available update for Nero,
this
> being 5.5.10.20. Installed ok, however, if I now try to select my CD-RW
> from the available list, there is a cross over the Device I want to use,
> ATAPI CD-RW, which doesn't let me choose this option. If I try, then
check
> OK, I get the message:Sorry this Nero version only support Plextor
recorders
> only. How can I progress from here?
>
> Thanks
>
> Greg Matthews

You are using or upgrading from a version of Nero that came bundled with a
Plextor drive. You will have to "purchase" an upgrade from Nero that is
coded for all drives they support. I think it's $19.95 if I remember
correctly

Charles Tomaras
Seattle, WA

[Charles Tomaras]

"Greg Matthews" > wrote in message
...
> Hi,
>
> I took your advice and downloaded the latest available update for Nero,
this
> being 5.5.10.20. Installed ok, however, if I now try to select my CD-RW
> from the available list, there is a cross over the Device I want to use,
> ATAPI CD-RW, which doesn't let me choose this option. If I try, then
check
> OK, I get the message:Sorry this Nero version only support Plextor
recorders
> only. How can I progress from here?
>
> Thanks
>
> Greg Matthews

You are using or upgrading from a version of Nero that came bundled with a
Plextor drive. You will have to "purchase" an upgrade from Nero that is
coded for all drives they support. I think it's $19.95 if I remember
correctly

Charles Tomaras
Seattle, WA

[John E. Carty]

If your Nero came packaged with a CD-RW drive and you have since changed the
brand of drive you are using it will not allow you to upgrade. These
versions of Nero are tied to the specific make drive with which they were
purchased :-)


"Terry" > wrote in message
...
> The software is not recognizing the drive and/or cd. I had similar problem
> with a bad drive.
>
> "Greg Matthews" > wrote in message
> ...
> > Hi,
> >
> > I have just installed Nero 5.5 onto my computer. When first opening up
> the
> > program, I was not given the "Start Multisession disk" or "Continue
> > Multisession disk" options. If I use the Wizard option, the "Continue
> with
> > an existing data-CD(multi-session) option is greyed out. It does
> state:The
> > option to continue an existing CD is disabled, because you have selected
> the
> > image recorder. Select your real recorder by using the menu command 'CD
> > Recorder > 'Choose Recorder' to enable this feature. However, now in
this
> > section, there is only an option titled 'Image Recorder' and no where
for
> me
> > to unselect this or choose another option.
> >
> > How can I get around this problem.
> >
> > Thanks
> >
> > Greg Matthews
> >
> >
>
>

[John E. Carty]

If your Nero came packaged with a CD-RW drive and you have since changed the
brand of drive you are using it will not allow you to upgrade. These
versions of Nero are tied to the specific make drive with which they were
purchased :-)


"Terry" > wrote in message
...
> The software is not recognizing the drive and/or cd. I had similar problem
> with a bad drive.
>
> "Greg Matthews" > wrote in message
> ...
> > Hi,
> >
> > I have just installed Nero 5.5 onto my computer. When first opening up
> the
> > program, I was not given the "Start Multisession disk" or "Continue
> > Multisession disk" options. If I use the Wizard option, the "Continue
> with
> > an existing data-CD(multi-session) option is greyed out. It does
> state:The
> > option to continue an existing CD is disabled, because you have selected
> the
> > image recorder. Select your real recorder by using the menu command 'CD
> > Recorder > 'Choose Recorder' to enable this feature. However, now in
this
> > section, there is only an option titled 'Image Recorder' and no where
for
> me
> > to unselect this or choose another option.
> >
> > How can I get around this problem.
> >
> > Thanks
> >
> > Greg Matthews
> >
> >
>
>

[Kenny]

Just come from friends house who had exactly the same problem and like
others have suggested it was because it was not being used with the drive it
came bundled with. You can get round it but the wife warned me not to tell
you how.

--

Kenny

"My mind not only wanders, sometimes it leaves completely!"

"John E. Carty" > wrote in message
...
> If your Nero came packaged with a CD-RW drive and you have since changed
the
> brand of drive you are using it will not allow you to upgrade. These
> versions of Nero are tied to the specific make drive with which they were
> purchased :-)
>
>
> "Terry" > wrote in message
> ...
> > The software is not recognizing the drive and/or cd. I had similar
problem
> > with a bad drive.
> >
> > "Greg Matthews" > wrote in message
> > ...
> > > Hi,
> > >
> > > I have just installed Nero 5.5 onto my computer. When first opening
up
> > the
> > > program, I was not given the "Start Multisession disk" or "Continue
> > > Multisession disk" options. If I use the Wizard option, the "Continue
> > with
> > > an existing data-CD(multi-session) option is greyed out. It does
> > state:The
> > > option to continue an existing CD is disabled, because you have
selected
> > the
> > > image recorder. Select your real recorder by using the menu command
'CD
> > > Recorder > 'Choose Recorder' to enable this feature. However, now in
> this
> > > section, there is only an option titled 'Image Recorder' and no where
> for
> > me
> > > to unselect this or choose another option.
> > >
> > > How can I get around this problem.
> > >
> > > Thanks
> > >
> > > Greg Matthews
> > >
> > >
> >
> >
>
>

[Kenny]

Just come from friends house who had exactly the same problem and like
others have suggested it was because it was not being used with the drive it
came bundled with. You can get round it but the wife warned me not to tell
you how.

--

Kenny

"My mind not only wanders, sometimes it leaves completely!"

"John E. Carty" > wrote in message
...
> If your Nero came packaged with a CD-RW drive and you have since changed
the
> brand of drive you are using it will not allow you to upgrade. These
> versions of Nero are tied to the specific make drive with which they were
> purchased :-)
>
>
> "Terry" > wrote in message
> ...
> > The software is not recognizing the drive and/or cd. I had similar
problem
> > with a bad drive.
> >
> > "Greg Matthews" > wrote in message
> > ...
> > > Hi,
> > >
> > > I have just installed Nero 5.5 onto my computer. When first opening
up
> > the
> > > program, I was not given the "Start Multisession disk" or "Continue
> > > Multisession disk" options. If I use the Wizard option, the "Continue
> > with
> > > an existing data-CD(multi-session) option is greyed out. It does
> > state:The
> > > option to continue an existing CD is disabled, because you have
selected
> > the
> > > image recorder. Select your real recorder by using the menu command
'CD
> > > Recorder > 'Choose Recorder' to enable this feature. However, now in
> this
> > > section, there is only an option titled 'Image Recorder' and no where
> for
> > me
> > > to unselect this or choose another option.
> > >
> > > How can I get around this problem.
> > >
> > > Thanks
> > >
> > > Greg Matthews
> > >
> > >
> >
> >
>
>

[Mr Moneypenny]

I was thinking of buying Nero, (Amazon in UK).

I presume this will work with any drive?

Cliff

"Kenny" > wrote in message
...
> Just come from friends house who had exactly the same problem and like
> others have suggested it was because it was not being used with the drive
it
> came bundled with. You can get round it but the wife warned me not to
tell
> you how.
>
> --
>
> Kenny
>
> "My mind not only wanders, sometimes it leaves completely!"
>
> "John E. Carty" > wrote in message
> ...
> > If your Nero came packaged with a CD-RW drive and you have since changed
> the
> > brand of drive you are using it will not allow you to upgrade. These
> > versions of Nero are tied to the specific make drive with which they
were
> > purchased :-)
> >
> >
> > "Terry" > wrote in message
> > ...
> > > The software is not recognizing the drive and/or cd. I had similar
> problem
> > > with a bad drive.
> > >
> > > "Greg Matthews" > wrote in message
> > > ...
> > > > Hi,
> > > >
> > > > I have just installed Nero 5.5 onto my computer. When first opening
> up
> > > the
> > > > program, I was not given the "Start Multisession disk" or "Continue
> > > > Multisession disk" options. If I use the Wizard option, the
"Continue
> > > with
> > > > an existing data-CD(multi-session) option is greyed out. It does
> > > state:The
> > > > option to continue an existing CD is disabled, because you have
> selected
> > > the
> > > > image recorder. Select your real recorder by using the menu command
> 'CD
> > > > Recorder > 'Choose Recorder' to enable this feature. However, now
in
> > this
> > > > section, there is only an option titled 'Image Recorder' and no
where
> > for
> > > me
> > > > to unselect this or choose another option.
> > > >
> > > > How can I get around this problem.
> > > >
> > > > Thanks
> > > >
> > > > Greg Matthews
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Mr Moneypenny]

I was thinking of buying Nero, (Amazon in UK).

I presume this will work with any drive?

Cliff

"Kenny" > wrote in message
...
> Just come from friends house who had exactly the same problem and like
> others have suggested it was because it was not being used with the drive
it
> came bundled with. You can get round it but the wife warned me not to
tell
> you how.
>
> --
>
> Kenny
>
> "My mind not only wanders, sometimes it leaves completely!"
>
> "John E. Carty" > wrote in message
> ...
> > If your Nero came packaged with a CD-RW drive and you have since changed
> the
> > brand of drive you are using it will not allow you to upgrade. These
> > versions of Nero are tied to the specific make drive with which they
were
> > purchased :-)
> >
> >
> > "Terry" > wrote in message
> > ...
> > > The software is not recognizing the drive and/or cd. I had similar
> problem
> > > with a bad drive.
> > >
> > > "Greg Matthews" > wrote in message
> > > ...
> > > > Hi,
> > > >
> > > > I have just installed Nero 5.5 onto my computer. When first opening
> up
> > > the
> > > > program, I was not given the "Start Multisession disk" or "Continue
> > > > Multisession disk" options. If I use the Wizard option, the
"Continue
> > > with
> > > > an existing data-CD(multi-session) option is greyed out. It does
> > > state:The
> > > > option to continue an existing CD is disabled, because you have
> selected
> > > the
> > > > image recorder. Select your real recorder by using the menu command
> 'CD
> > > > Recorder > 'Choose Recorder' to enable this feature. However, now
in
> > this
> > > > section, there is only an option titled 'Image Recorder' and no
where
> > for
> > > me
> > > > to unselect this or choose another option.
> > > >
> > > > How can I get around this problem.
> > > >
> > > > Thanks
> > > >
> > > > Greg Matthews
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Rick \Nutcase\ Rogers]

Hi Cliff,

It's worked with every CDRW drive I've used. It's the version that comes
bundled with certain drives that is limited to only that hardware. The
generic version available at www.ahead.de will work with any CDRW drive.

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Win9x - http://mvp.support.microsoft.com/
Associate Expert - WinXP - Expert Zone -
www.microsoft.com/windowsxp/expertzone
Win98 Help - www.rickrogers.org

"Mr Moneypenny" > wrote in message
...
> I was thinking of buying Nero, (Amazon in UK).
>
> I presume this will work with any drive?
>
> Cliff
>
> "Kenny" > wrote in message
> ...
> > Just come from friends house who had exactly the same problem and like
> > others have suggested it was because it was not being used with the
> > drive
> it
> > came bundled with. You can get round it but the wife warned me not to
> tell
> > you how.
> >
> > --
> >
> > Kenny
> >
> > "My mind not only wanders, sometimes it leaves completely!"
> >
> > "John E. Carty" > wrote in message
> > ...
> > > If your Nero came packaged with a CD-RW drive and you have since
> > > changed
> > the
> > > brand of drive you are using it will not allow you to upgrade. These
> > > versions of Nero are tied to the specific make drive with which they
> were
> > > purchased :-)
> > >
> > >
> > > "Terry" > wrote in message
> > > ...
> > > > The software is not recognizing the drive and/or cd. I had similar
> > problem
> > > > with a bad drive.
> > > >
> > > > "Greg Matthews" > wrote in message
> > > > ...
> > > > > Hi,
> > > > >
> > > > > I have just installed Nero 5.5 onto my computer. When first
> > > > > opening
> > up
> > > > the
> > > > > program, I was not given the "Start Multisession disk" or
> > > > > "Continue
> > > > > Multisession disk" options. If I use the Wizard option, the
> "Continue
> > > > with
> > > > > an existing data-CD(multi-session) option is greyed out. It does
> > > > state:The
> > > > > option to continue an existing CD is disabled, because you have
> > selected
> > > > the
> > > > > image recorder. Select your real recorder by using the menu
> > > > > command
> > 'CD
> > > > > Recorder > 'Choose Recorder' to enable this feature. However, now
> in
> > > this
> > > > > section, there is only an option titled 'Image Recorder' and no
> where
> > > for
> > > > me
> > > > > to unselect this or choose another option.
> > > > >
> > > > > How can I get around this problem.
> > > > >
> > > > > Thanks
> > > > >
> > > > > Greg Matthews
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Rick \Nutcase\ Rogers]

Hi Cliff,

It's worked with every CDRW drive I've used. It's the version that comes
bundled with certain drives that is limited to only that hardware. The
generic version available at www.ahead.de will work with any CDRW drive.

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Win9x - http://mvp.support.microsoft.com/
Associate Expert - WinXP - Expert Zone -
www.microsoft.com/windowsxp/expertzone
Win98 Help - www.rickrogers.org

"Mr Moneypenny" > wrote in message
...
> I was thinking of buying Nero, (Amazon in UK).
>
> I presume this will work with any drive?
>
> Cliff
>
> "Kenny" > wrote in message
> ...
> > Just come from friends house who had exactly the same problem and like
> > others have suggested it was because it was not being used with the
> > drive
> it
> > came bundled with. You can get round it but the wife warned me not to
> tell
> > you how.
> >
> > --
> >
> > Kenny
> >
> > "My mind not only wanders, sometimes it leaves completely!"
> >
> > "John E. Carty" > wrote in message
> > ...
> > > If your Nero came packaged with a CD-RW drive and you have since
> > > changed
> > the
> > > brand of drive you are using it will not allow you to upgrade. These
> > > versions of Nero are tied to the specific make drive with which they
> were
> > > purchased :-)
> > >
> > >
> > > "Terry" > wrote in message
> > > ...
> > > > The software is not recognizing the drive and/or cd. I had similar
> > problem
> > > > with a bad drive.
> > > >
> > > > "Greg Matthews" > wrote in message
> > > > ...
> > > > > Hi,
> > > > >
> > > > > I have just installed Nero 5.5 onto my computer. When first
> > > > > opening
> > up
> > > > the
> > > > > program, I was not given the "Start Multisession disk" or
> > > > > "Continue
> > > > > Multisession disk" options. If I use the Wizard option, the
> "Continue
> > > > with
> > > > > an existing data-CD(multi-session) option is greyed out. It does
> > > > state:The
> > > > > option to continue an existing CD is disabled, because you have
> > selected
> > > > the
> > > > > image recorder. Select your real recorder by using the menu
> > > > > command
> > 'CD
> > > > > Recorder > 'Choose Recorder' to enable this feature. However, now
> in
> > > this
> > > > > section, there is only an option titled 'Image Recorder' and no
> where
> > > for
> > > > me
> > > > > to unselect this or choose another option.
> > > > >
> > > > > How can I get around this problem.
> > > > >
> > > > > Thanks
> > > > >
> > > > > Greg Matthews
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Mr Moneypenny]

Thank you Rick

"Rick "Nutcase" Rogers" > wrote in message
...
> Hi Cliff,
>
> It's worked with every CDRW drive I've used. It's the version that comes
> bundled with certain drives that is limited to only that hardware. The
> generic version available at www.ahead.de will work with any CDRW drive.
>
> --
> Best of Luck,
>
> Rick Rogers aka "Nutcase" MS-MVP - Win9x -
http://mvp.support.microsoft.com/
> Associate Expert - WinXP - Expert Zone -
> www.microsoft.com/windowsxp/expertzone
> Win98 Help - www.rickrogers.org
>
> "Mr Moneypenny" > wrote in message
> ...
> > I was thinking of buying Nero, (Amazon in UK).
> >
> > I presume this will work with any drive?
> >
> > Cliff
> >
> > "Kenny" > wrote in message
> > ...
> > > Just come from friends house who had exactly the same problem and like
> > > others have suggested it was because it was not being used with the
> > > drive
> > it
> > > came bundled with. You can get round it but the wife warned me not to
> > tell
> > > you how.
> > >
> > > --
> > >
> > > Kenny
> > >
> > > "My mind not only wanders, sometimes it leaves completely!"
> > >
> > > "John E. Carty" > wrote in message
> > > ...
> > > > If your Nero came packaged with a CD-RW drive and you have since
> > > > changed
> > > the
> > > > brand of drive you are using it will not allow you to upgrade. These
> > > > versions of Nero are tied to the specific make drive with which they
> > were
> > > > purchased :-)
> > > >
> > > >
> > > > "Terry" > wrote in message
> > > > ...
> > > > > The software is not recognizing the drive and/or cd. I had similar
> > > problem
> > > > > with a bad drive.
> > > > >
> > > > > "Greg Matthews" > wrote in message
> > > > > ...
> > > > > > Hi,
> > > > > >
> > > > > > I have just installed Nero 5.5 onto my computer. When first
> > > > > > opening
> > > up
> > > > > the
> > > > > > program, I was not given the "Start Multisession disk" or
> > > > > > "Continue
> > > > > > Multisession disk" options. If I use the Wizard option, the
> > "Continue
> > > > > with
> > > > > > an existing data-CD(multi-session) option is greyed out. It
does
> > > > > state:The
> > > > > > option to continue an existing CD is disabled, because you have
> > > selected
> > > > > the
> > > > > > image recorder. Select your real recorder by using the menu
> > > > > > command
> > > 'CD
> > > > > > Recorder > 'Choose Recorder' to enable this feature. However,
now
> > in
> > > > this
> > > > > > section, there is only an option titled 'Image Recorder' and no
> > where
> > > > for
> > > > > me
> > > > > > to unselect this or choose another option.
> > > > > >
> > > > > > How can I get around this problem.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Greg Matthews
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >

[Mr Moneypenny]

Thank you Rick

"Rick "Nutcase" Rogers" > wrote in message
...
> Hi Cliff,
>
> It's worked with every CDRW drive I've used. It's the version that comes
> bundled with certain drives that is limited to only that hardware. The
> generic version available at www.ahead.de will work with any CDRW drive.
>
> --
> Best of Luck,
>
> Rick Rogers aka "Nutcase" MS-MVP - Win9x -
http://mvp.support.microsoft.com/
> Associate Expert - WinXP - Expert Zone -
> www.microsoft.com/windowsxp/expertzone
> Win98 Help - www.rickrogers.org
>
> "Mr Moneypenny" > wrote in message
> ...
> > I was thinking of buying Nero, (Amazon in UK).
> >
> > I presume this will work with any drive?
> >
> > Cliff
> >
> > "Kenny" > wrote in message
> > ...
> > > Just come from friends house who had exactly the same problem and like
> > > others have suggested it was because it was not being used with the
> > > drive
> > it
> > > came bundled with. You can get round it but the wife warned me not to
> > tell
> > > you how.
> > >
> > > --
> > >
> > > Kenny
> > >
> > > "My mind not only wanders, sometimes it leaves completely!"
> > >
> > > "John E. Carty" > wrote in message
> > > ...
> > > > If your Nero came packaged with a CD-RW drive and you have since
> > > > changed
> > > the
> > > > brand of drive you are using it will not allow you to upgrade. These
> > > > versions of Nero are tied to the specific make drive with which they
> > were
> > > > purchased :-)
> > > >
> > > >
> > > > "Terry" > wrote in message
> > > > ...
> > > > > The software is not recognizing the drive and/or cd. I had similar
> > > problem
> > > > > with a bad drive.
> > > > >
> > > > > "Greg Matthews" > wrote in message
> > > > > ...
> > > > > > Hi,
> > > > > >
> > > > > > I have just installed Nero 5.5 onto my computer. When first
> > > > > > opening
> > > up
> > > > > the
> > > > > > program, I was not given the "Start Multisession disk" or
> > > > > > "Continue
> > > > > > Multisession disk" options. If I use the Wizard option, the
> > "Continue
> > > > > with
> > > > > > an existing data-CD(multi-session) option is greyed out. It
does
> > > > > state:The
> > > > > > option to continue an existing CD is disabled, because you have
> > > selected
> > > > > the
> > > > > > image recorder. Select your real recorder by using the menu
> > > > > > command
> > > 'CD
> > > > > > Recorder > 'Choose Recorder' to enable this feature. However,
now
> > in
> > > > this
> > > > > > section, there is only an option titled 'Image Recorder' and no
> > where
> > > > for
> > > > > me
> > > > > > to unselect this or choose another option.
> > > > > >
> > > > > > How can I get around this problem.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Greg Matthews
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >

[Ieks]

"Greg Matthews" > schreef in bericht
...
> Hi,
>
> I have just installed Nero 5.5 onto my computer. When first opening up
the
> program, I was not given the "Start Multisession disk" or "Continue
> Multisession disk" options. If I use the Wizard option, the "Continue
with
> an existing data-CD(multi-session) option is greyed out. It does
state:The
> option to continue an existing CD is disabled, because you have selected
the
> image recorder. Select your real recorder by using the menu command 'CD
> Recorder > 'Choose Recorder' to enable this feature. However, now in this
> section, there is only an option titled 'Image Recorder' and no where for
me
> to unselect this or choose another option.
>
> How can I get around this problem.
>
> Thanks
>
> Greg Matthews
>
To help you i have a few quistions:

1. Who is the manufactor of you CDwrewriter?
2. What kind of type CDwrewriter is it
3. Is it a DVDCombo from Samsung after type 308?

If you can answer me to this quistions i can for sure help you out.

Paul

[Ieks]

"Greg Matthews" > schreef in bericht
...
> Hi,
>
> I have just installed Nero 5.5 onto my computer. When first opening up
the
> program, I was not given the "Start Multisession disk" or "Continue
> Multisession disk" options. If I use the Wizard option, the "Continue
with
> an existing data-CD(multi-session) option is greyed out. It does
state:The
> option to continue an existing CD is disabled, because you have selected
the
> image recorder. Select your real recorder by using the menu command 'CD
> Recorder > 'Choose Recorder' to enable this feature. However, now in this
> section, there is only an option titled 'Image Recorder' and no where for
me
> to unselect this or choose another option.
>
> How can I get around this problem.
>
> Thanks
>
> Greg Matthews
>
To help you i have a few quistions:

1. Who is the manufactor of you CDwrewriter?
2. What kind of type CDwrewriter is it
3. Is it a DVDCombo from Samsung after type 308?

If you can answer me to this quistions i can for sure help you out.

Paul