PDA

View Full Version : Re: Could not browse from network???


Robert L
April 4th 03, 05:22 PM
if you can access remote computer by ip but not name, this is possible name
resolution issue. what kind OS do you have in your network? if you have
correct tcp/ip settings, you should be able to ping your computer from
others. do you use NetBEUI also?

--
For more information, go to http://www25.brinkster.com/ChicagoTech

Please don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, CNE & MCSE
Windows & Network Support, Tips and FAQs on
http://www25.brinkster.com/ChicagoTech
This posting is provided "AS IS" with no warranties.

"steven" > wrote in message
...
> hi!
>
> i had a problems for my windows xp home
> editions.Currently i had installed the pci network card
> and can be functioning very well.Normally when we
> installed the network card it will auto-detect and
> installed by itself but this happenned when i already
> inserts the ip address,subnet and gateway then i go to
> network neighborhood but i couldn't browse for others
> workgroup? But the weird thing is i can ping other users
> and it shows a reply from the users but the user cannot
> ping my pc ??? When I go to START and select RUN and i
> key in the user pc name it will show > the share name
> could not be found and make sure you type it correctly!!
> But i used the same procedure and i just key in the user
> ip address and i can log into the network?? Can you tell
> me why this thing happpened and is there anything related
> to the network setting??

Google