I can't browse my Network printer

[Jason]

Check to make sure your network adapter is not firewalled.
>-----Original Message-----
>
>I have just upgraded my pc to xp from 98se. All worked
fine before so it's
>got me stumped.
>I use a network printer through it's own network card
(the internet is on a
>separate one) & I can see via int. explorer the print
station. I can ping
>the address 192.9.203.7 (255.255.255.0) in a command
window but I can't
>browse the network like I could in 98 to achieve a
connection with the
>printer, any clues??
>
>Thanks,
>
>Neil
>
>
>.
>

[Daniel Carwile]

Go to Start/Run and type the computername or IP address of the PC it is
installed on. \\computername or \\192.9.203.x You must use the 2 back
slashes in front. Then you can double click on the printer to install it on
other PC's on the network, so they can print to it.

"Jason" > wrote in message
...
> Check to make sure your network adapter is not firewalled.
> >-----Original Message-----
> >
> >I have just upgraded my pc to xp from 98se. All worked
> fine before so it's
> >got me stumped.
> >I use a network printer through it's own network card
> (the internet is on a
> >separate one) & I can see via int. explorer the print
> station. I can ping
> >the address 192.9.203.7 (255.255.255.0) in a command
> window but I can't
> >browse the network like I could in 98 to achieve a
> connection with the
> >printer, any clues??
> >
> >Thanks,
> >
> >Neil
> >
> >
> >.
> >