re

It is enabled in the BIOS, all other USB devices work
fine (camera, gamepad, UPS). About half the time it sees
the printer and installs the drivers, but I still can't
print to it. The other half the time the USB printing
service fails to start "Code 10" or installs as "Unknown
device".


>-----Original Message-----
>
><na@na> wrote in message news:05a901c362d4$013fe7e0
...
>> Since this is a brand new chipset/board I assume this
is
>> a compatibility issue that was never checked.
>>
>> The printer works fine on my old AMD motherboard (AMD
761
>> chipset with USB 1.1), I just verified that.
>>
>> I've tried everything, uninstalling, rebooting, etc...
>> Sometimes the USB Printing support doesn't even install
>> correctly (This device can not start, Code 10). Other
>> times everything looks ok, XP adds the printer drivers
>> ok, but as soon as I try to print (test page, Notepad,
>> anything) it pops up a little USB error window saying
it
>> can not print.
>>
>> I assume updated USB drivers are in the works?
>
>Make sure that USB is enabled in your BIOS and make sure
from the HP web
>site that you are using the XP driver. Also follow the
HP instructions for
>installation EXACTLY
>
>Eric Booth
>
>
>.
>