Jim
January 10th 04, 01:24 AM
Yes, all the machines are running through a hub.
The problem that I'm having is that I get an error message
when I try to initiate ICS on the main computer.
As for the computers being able to communicate with each
other, they do that ok.
I just can't figure out why I get the following error
message with ICS.
"An error occurred while Internet Connection Sharing was
being enabled. The Service cannot accept control messages
at this time".
>-----Original Message-----
> I assume that you are running all 4 machines through a
>hub make sure that the preferred gateway is set to
>192.168.0.1 on the other 3 machines and that the
preferred
>dns is also set to 192.168.0.1for those other 3
machines..
>
>Good luck
>>-----Original Message-----
>>I am trying to setup a home network with XP Pro on the
>>main computer, W2K on the 2nd, Win 98 on the 3rd & 4th.
>>
>>All computers are in the same workgroup and can see
each
>>other and transfer data between each other.
>>
>>The Main computer (XP) is set with a TCP/IP of
192.168.0.1
>>all the others are set with:
>>192.168.0.2
>>192.168.0.3
>>192.168.0.4
>>
>>All have a class C subnet mask of 255.255.255.0
>>
>>Everything works...Until I try to setup ICS. (It use to
>>work, but won't now)...
>>
>>I get an error message as I try to start it that says:
>>
>>"An error occurred while Internet Connection Sharing
was
>>being enabled.
>>
>>The Service cannot accept control messages at this
time".
>>
>>
>>Any help is appreciated. I have uninstalled and
>>reinstalled my USB adapter and the software. I have
set
>>the other computers to automatically obtain their
TCP/IP
>>settings and put them back.
>>
>>"Thank You In Advance!"
>>Jim
>>
>>.
>>
>.
>
The problem that I'm having is that I get an error message
when I try to initiate ICS on the main computer.
As for the computers being able to communicate with each
other, they do that ok.
I just can't figure out why I get the following error
message with ICS.
"An error occurred while Internet Connection Sharing was
being enabled. The Service cannot accept control messages
at this time".
>-----Original Message-----
> I assume that you are running all 4 machines through a
>hub make sure that the preferred gateway is set to
>192.168.0.1 on the other 3 machines and that the
preferred
>dns is also set to 192.168.0.1for those other 3
machines..
>
>Good luck
>>-----Original Message-----
>>I am trying to setup a home network with XP Pro on the
>>main computer, W2K on the 2nd, Win 98 on the 3rd & 4th.
>>
>>All computers are in the same workgroup and can see
each
>>other and transfer data between each other.
>>
>>The Main computer (XP) is set with a TCP/IP of
192.168.0.1
>>all the others are set with:
>>192.168.0.2
>>192.168.0.3
>>192.168.0.4
>>
>>All have a class C subnet mask of 255.255.255.0
>>
>>Everything works...Until I try to setup ICS. (It use to
>>work, but won't now)...
>>
>>I get an error message as I try to start it that says:
>>
>>"An error occurred while Internet Connection Sharing
was
>>being enabled.
>>
>>The Service cannot accept control messages at this
time".
>>
>>
>>Any help is appreciated. I have uninstalled and
>>reinstalled my USB adapter and the software. I have
set
>>the other computers to automatically obtain their
TCP/IP
>>settings and put them back.
>>
>>"Thank You In Advance!"
>>Jim
>>
>>.
>>
>.
>