Sam
January 10th 04, 01:34 AM
if you go into Network Connections
then go into the properties of the ethernet (LAN)
in the Genral tab click the Configure button
in the Power Management tab make sure
'allow the computer to turn this ....' is unchecked!
>-----Original Message-----
>I have 2 computers running through a Belkin router and
>LinkSys cable modem. Both computers go into hibernation
>mode. One computer runs 2000 Pro and can connect onto
the
>internet immdiately after coming out of hibernation. The
>other with XP Home can't connect to the internet unless a
>reboot is performed. I've read that the pre-installed
>Realtech NIC doesn't perform well so I bought a D-Link
NIc
>but I have the same issues. The driver for the new card
>runs off a Realtech chipset, so I don't think I'm gaining
>anything. Does anyone have any ideas?
>.
>
then go into the properties of the ethernet (LAN)
in the Genral tab click the Configure button
in the Power Management tab make sure
'allow the computer to turn this ....' is unchecked!
>-----Original Message-----
>I have 2 computers running through a Belkin router and
>LinkSys cable modem. Both computers go into hibernation
>mode. One computer runs 2000 Pro and can connect onto
the
>internet immdiately after coming out of hibernation. The
>other with XP Home can't connect to the internet unless a
>reboot is performed. I've read that the pre-installed
>Realtech NIC doesn't perform well so I bought a D-Link
NIc
>but I have the same issues. The driver for the new card
>runs off a Realtech chipset, so I don't think I'm gaining
>anything. Does anyone have any ideas?
>.
>