firewire and Dv camera

[Jac]

Hi guys

I am having the same difficulties with my Panasonic
digital video camera. I have installed Windows XP and my
computer won't recognise my camera through the Fire Wire,
so if anyone has any ideas of the solution, I would love
to hear it.

Thanks
>-----Original Message-----
>
>
>
> Hi guys,
>
> Win xp pro (sp1) directx 9 - my jvc digital video
cam is not seen by
>firewire at all. Over the past week i have - tried 4
different firewire
>cables, 3 different firewire cards (all installed fine
and showed up in
>DevMgr as working).and 2 different (but still JVC) cams.
Installed XP onto
>second partition..nothing..Ended up fomatting hard drives
and doing a full
>new install of xp..still nothing.
>
> Also tried using my Pinnacle Movie Box DX (hadn't
tried it before as
>to busy trying to at least get my cam seen over
firewire). Even that is not
>seen by firewire ports. Also hooked up a laptop to my pc
via firewire to see
>if i could get a network running over firewire and still
nothing- seems the
>firewire ports arent registering anything that is
connected to them, no
>matter which firewire card or cable i use!
>
> Has anyone with similar probs tried this fix? -
>http://support.microsoft.com/default.aspx?...kb;en-
us;329256 - and did it
>make any difference?
>
> To see more ppl with this issue- go to
www.dvboard.com and check under
>>Hardware > 1394
>
> Any ideas to assist would be appreciated
>
> Thanks guys
>
>
>

[Cari \(MS-MVP\)]

What model of Panasonic DV camcorder?

Is the camcorder connected to the PC and turned on ... in VCR mode?

Cari
www.coribright.com

"Jac" > wrote in message
...
> Hi guys
>
> I am having the same difficulties with my Panasonic
> digital video camera. I have installed Windows XP and my
> computer won't recognise my camera through the Fire Wire,
> so if anyone has any ideas of the solution, I would love
> to hear it.
>
> Thanks
> >-----Original Message-----
> >
> >
> >
> > Hi guys,
> >
> > Win xp pro (sp1) directx 9 - my jvc digital video
> cam is not seen by
> >firewire at all. Over the past week i have - tried 4
> different firewire
> >cables, 3 different firewire cards (all installed fine
> and showed up in
> >DevMgr as working).and 2 different (but still JVC) cams.
> Installed XP onto
> >second partition..nothing..Ended up fomatting hard drives
> and doing a full
> >new install of xp..still nothing.
> >
> > Also tried using my Pinnacle Movie Box DX (hadn't
> tried it before as
> >to busy trying to at least get my cam seen over
> firewire). Even that is not
> >seen by firewire ports. Also hooked up a laptop to my pc
> via firewire to see
> >if i could get a network running over firewire and still
> nothing- seems the
> >firewire ports arent registering anything that is
> connected to them, no
> >matter which firewire card or cable i use!
> >
> > Has anyone with similar probs tried this fix? -
> >http://support.microsoft.com/default.aspx?...kb;en-
> us;329256 - and did it
> >make any difference?
> >
> > To see more ppl with this issue- go to
> www.dvboard.com and check under
> >>Hardware > 1394
> >
> > Any ideas to assist would be appreciated
> >
> > Thanks guys
> >
> >
> >

[Mike]

I'm having the same problem,XP sees the firewire card but
when I plug the camera (cannon ZR10) in and turn it on
nothing.
>-----Original Message-----
>What model of Panasonic DV camcorder?
>
>Is the camcorder connected to the PC and turned on ...
in VCR mode?
>
>Cari
>www.coribright.com
>
>"Jac" > wrote in message
...
>> Hi guys
>>
>> I am having the same difficulties with my Panasonic
>> digital video camera. I have installed Windows XP and
my
>> computer won't recognise my camera through the Fire
Wire,
>> so if anyone has any ideas of the solution, I would
love
>> to hear it.
>>
>> Thanks
>> >-----Original Message-----
>> >
>> >
>> >
>> > Hi guys,
>> >
>> > Win xp pro (sp1) directx 9 - my jvc digital
video
>> cam is not seen by
>> >firewire at all. Over the past week i have - tried 4
>> different firewire
>> >cables, 3 different firewire cards (all installed fine
>> and showed up in
>> >DevMgr as working).and 2 different (but still JVC)
cams.
>> Installed XP onto
>> >second partition..nothing..Ended up fomatting hard
drives
>> and doing a full
>> >new install of xp..still nothing.
>> >
>> > Also tried using my Pinnacle Movie Box DX
(hadn't
>> tried it before as
>> >to busy trying to at least get my cam seen over
>> firewire). Even that is not
>> >seen by firewire ports. Also hooked up a laptop to my
pc
>> via firewire to see
>> >if i could get a network running over firewire and
still
>> nothing- seems the
>> >firewire ports arent registering anything that is
>> connected to them, no
>> >matter which firewire card or cable i use!
>> >
>> > Has anyone with similar probs tried this fix? -
>> >http://support.microsoft.com/default.aspx?...kb;en-
>> us;329256 - and did it
>> >make any difference?
>> >
>> > To see more ppl with this issue- go to
>> www.dvboard.com and check under
>> >>Hardware > 1394
>> >
>> > Any ideas to assist would be appreciated
>> >
>> > Thanks guys
>> >
>> >
>> >
>
>
>.
>

[rlcaulder]

>-----Original Message-----
>I'm having the same problem,XP sees the firewire card
but
>when I plug the camera (cannon ZR10) in and turn it on
>nothing.
>>-----Original Message-----
>>What model of Panasonic DV camcorder?
>>
>>Is the camcorder connected to the PC and turned on ...
>in VCR mode?
>>
>>Cari
>>www.coribright.com
>>
>>"Jac" > wrote in message
...
>>> Hi guys
>>>
>>> I am having the same difficulties with my Panasonic
>>> digital video camera. I have installed Windows XP
and
>my
>>> computer won't recognise my camera through the Fire
>Wire,
>>> so if anyone has any ideas of the solution, I would
>love
>>> to hear it.
>>>
>>> Thanks
>>> >-----Original Message-----
>>> >
>>> >
>>> >
>>> > Hi guys,
>>> >
>>> > Win xp pro (sp1) directx 9 - my jvc digital
>video
>>> cam is not seen by
>>> >firewire at all. Over the past week i have - tried 4
>>> different firewire
>>> >cables, 3 different firewire cards (all installed
fine
>>> and showed up in
>>> >DevMgr as working).and 2 different (but still JVC)
>cams.
>>> Installed XP onto
>>> >second partition..nothing..Ended up fomatting hard
>drives
>>> and doing a full
>>> >new install of xp..still nothing.
>>> >
>>> > Also tried using my Pinnacle Movie Box DX
>(hadn't
>>> tried it before as
>>> >to busy trying to at least get my cam seen over
>>> firewire). Even that is not
>>> >seen by firewire ports. Also hooked up a laptop to
my
>pc
>>> via firewire to see
>>> >if i could get a network running over firewire and
>still
>>> nothing- seems the
>>> >firewire ports arent registering anything that is
>>> connected to them, no
>>> >matter which firewire card or cable i use!
>>> >
>>> > Has anyone with similar probs tried this fix? -
>>> >http://support.microsoft.com/default.aspx?...kb;en-
>>> us;329256 - and did it
>>> >make any difference?
>>> >
>>> > To see more ppl with this issue- go to
>>> www.dvboard.com and check under
>>> >>Hardware > 1394
>>> >
>>> > Any ideas to assist would be appreciated
>>> >
>>> > Thanks guys
>>> >
>>> >
>>> >
>>
>>
>>.
>>
>.
>Adobe says video editing will not work with firewire
hard drives. I turn off the drive before I hook up the
camera.