Mike
January 10th 04, 11:57 AM
I am adding a pc card to an IBM THinkpad 600 but it
doesn't remain loaded and does not recognize dv cable on a
Sony Camcorder. I assume upgrading the drivers is
appropriate next step, but cannot get access to the latest
drivers for the 1394. (v.2600)
The article says:
There are a number of "fixes" listed on knowledge article
A supported fix is now available from Microsoft, but it is
only intended to correct the problem that is described in
this article. Apply it only to computers that are
experiencing this specific problem. This fix may receive
additional testing. Therefore, if you are not severely
affected by this problem, Microsoft recommends that you
wait for the next Windows XP service pack that contains
this fix.
To resolve this problem immediately, contact Microsoft
Product Support Services to obtain the fix. For a complete
list of Microsoft Product Support Services phone numbers
and information about support costs, visit the following
Microsoft Web site:
http://support.microsoft.com/default.aspx?scid=fh;EN-
US;CNTACTMS
NOTE: In special cases, charges that are ordinarily
incurred for support calls may be canceled if a Microsoft
Support Professional determines that a specific update
will resolve your problem. The typical support costs will
apply to additional support questions and issues that do
not qualify for the specific update in question.
The English version of this fix should have the following
file attributes or later:
Date Time Version Size File name
----------------------------------------------------
18-FEB-2002 19:20 5.1.2600.29 49,664 1394bus.sys
I have 1394bus.sys 5.1.2600.1106.
Is a newer driver the answer?
If I keep the device manager open it says it recognizes
the host controller. If I add a cable to pc or camera it
attempts to load the 1394 net adaptor but then doesn't
actually give access.
Windows Movie Maker doesn't recognize the dv/av connection
doesn't remain loaded and does not recognize dv cable on a
Sony Camcorder. I assume upgrading the drivers is
appropriate next step, but cannot get access to the latest
drivers for the 1394. (v.2600)
The article says:
There are a number of "fixes" listed on knowledge article
A supported fix is now available from Microsoft, but it is
only intended to correct the problem that is described in
this article. Apply it only to computers that are
experiencing this specific problem. This fix may receive
additional testing. Therefore, if you are not severely
affected by this problem, Microsoft recommends that you
wait for the next Windows XP service pack that contains
this fix.
To resolve this problem immediately, contact Microsoft
Product Support Services to obtain the fix. For a complete
list of Microsoft Product Support Services phone numbers
and information about support costs, visit the following
Microsoft Web site:
http://support.microsoft.com/default.aspx?scid=fh;EN-
US;CNTACTMS
NOTE: In special cases, charges that are ordinarily
incurred for support calls may be canceled if a Microsoft
Support Professional determines that a specific update
will resolve your problem. The typical support costs will
apply to additional support questions and issues that do
not qualify for the specific update in question.
The English version of this fix should have the following
file attributes or later:
Date Time Version Size File name
----------------------------------------------------
18-FEB-2002 19:20 5.1.2600.29 49,664 1394bus.sys
I have 1394bus.sys 5.1.2600.1106.
Is a newer driver the answer?
If I keep the device manager open it says it recognizes
the host controller. If I add a cable to pc or camera it
attempts to load the 1394 net adaptor but then doesn't
actually give access.
Windows Movie Maker doesn't recognize the dv/av connection