DCC between XP and 98

[Gary Roach]

i'm trying to connect a windows XP pro machine and a windows 98 SE machine
using direct cable cable connection. i've set up the XP machine as the host
and the 98 machine as the guest and enabled the guest account on the xp
machine. when i attempt to connect from the 98 machine i get a log on dialog
where i enter the name and password for an account on the xp machine. then i
get a message on the 98 machine saying the connection is disconnected. i
checked the event log on the xp machine and found the following event
message corresponding to the attempt:

The user CATALYST\gary connected to port LPT1 has been disconnected because
no network protocols were successfully negotiatated.

i've got tcp/ip bound to the dial-up adapter in the network configuration on
the 98 machine. is what i'm trying to do possible? can 98 and xp be
connected this way? any help is greatly appreciated.

gary

--
Gary Roach
ADB Services
490-0287

[Steve Winograd [MVP]]

In article >, "Gary Roach"
> wrote:
>i'm trying to connect a windows XP pro machine and a windows 98 SE machine
>using direct cable cable connection. i've set up the XP machine as the host
>and the 98 machine as the guest and enabled the guest account on the xp
>machine. when i attempt to connect from the 98 machine i get a log on dialog
>where i enter the name and password for an account on the xp machine. then i
>get a message on the 98 machine saying the connection is disconnected. i
>checked the event log on the xp machine and found the following event
>message corresponding to the attempt:
>
>The user CATALYST\gary connected to port LPT1 has been disconnected because
>no network protocols were successfully negotiatated.
>
>i've got tcp/ip bound to the dial-up adapter in the network configuration on
>the 98 machine. is what i'm trying to do possible? can 98 and xp be
>connected this way? any help is greatly appreciated.
>
>gary

See this site:

DirectParallel® and Direct Cable Connection (DCC) Step-by-Step SETUP
http://www.lpt.com/Support/DCC-SetUp/dcc-setup.htm
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

[Gary Roach]

thanks - that's a great site. unfortunately, it says to use netbui over ipx
for communication between xp and 98. i want to use tcp/ip so that i can use
the xp box as a gateway to the internet for the 98 machine (the 98 machine
is a laptop with no network card and i don't want to spend the money to get
pc-card NIC in order to do reasonably fast downloads).

"Steve Winograd [MVP]" > wrote in message
...
> In article >, "Gary Roach"
> > wrote:
> >i'm trying to connect a windows XP pro machine and a windows 98 SE
machine
> >using direct cable cable connection. i've set up the XP machine as the
host
> >and the 98 machine as the guest and enabled the guest account on the xp
> >machine. when i attempt to connect from the 98 machine i get a log on
dialog
> >where i enter the name and password for an account on the xp machine.
then i
> >get a message on the 98 machine saying the connection is disconnected. i
> >checked the event log on the xp machine and found the following event
> >message corresponding to the attempt:
> >
> >The user CATALYST\gary connected to port LPT1 has been disconnected
because
> >no network protocols were successfully negotiatated.
> >
> >i've got tcp/ip bound to the dial-up adapter in the network configuration
on
> >the 98 machine. is what i'm trying to do possible? can 98 and xp be
> >connected this way? any help is greatly appreciated.
> >
> >gary
>
> See this site:
>
> DirectParallel® and Direct Cable Connection (DCC) Step-by-Step SETUP
> http://www.lpt.com/Support/DCC-SetUp/dcc-setup.htm
> --
> Best Wishes,
> Steve Winograd, MS-MVP (Windows Networking)
>
> Please post any reply as a follow-up message in the news group
> for everyone to see. I'm sorry, but I don't answer questions
> addressed directly to me in E-mail or news groups.
>
> Microsoft Most Valuable Professional - Windows Networking
> http://mvp.support.microsoft.com
>
> Steve Winograd's Networking FAQ
> http://www.bcmaven.com/networking/faq.htm

[Steve Winograd [MVP]]

In article >, "Gary Roach"
> wrote:
>> See this site:
>>
>> DirectParallel® and Direct Cable Connection (DCC) Step-by-Step SETUP
>> http://www.lpt.com/Support/DCC-SetUp/dcc-setup.htm
>
>thanks - that's a great site. unfortunately, it says to use netbui over ipx
>for communication between xp and 98. i want to use tcp/ip so that i can use
>the xp box as a gateway to the internet for the 98 machine (the 98 machine
>is a laptop with no network card and i don't want to spend the money to get
>pc-card NIC in order to do reasonably fast downloads).

I don't know what you mean by "netbui over ipx", Gary. NetBEUI and
IPX/SPX are completely different protocols, and Windows XP doesn't
support NetBEUI.

I'm sorry, but I don't think that what you want to do is possible. XP
can't share its Internet connection over a DCC connection. Internet
sharing requires an Ethernet connection.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com