Having a problem with...

[Joseph Minelli]

my cdrw drive for some reason,
I have a cdrw external drive
and it worked for months
but out of the blue, I'm getting
this error and I even got a new
cdrw drive for my cd rom drive
and I still get this error, here it is:

"A problem has been detected and windows has been shut down to prevent
damage to your computer.

If this is the first time you've seen this Stop error screen,
restart your computer, If this screen appears again, follow these
steps:

Check to be sure you have adequate disk space.
If a driver is identified in the Stop message, disable the driver or
check with the manufacturer for driver updates. Try changing video
adapters.

Check with your hardware vender for any BIOS updates.
Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components,
restart your computer, press F8 to select Advanced Startup Options,
and then select Same Mode.

Technical information:

*** STOP: 0*0000007E (0*C0000005.0*F87D7AD9.0*F8AC572C.0*F8AC542)

*** Cdr4_*p. SYS - Address F87D7AD9 base at F87D6000. DateStamp
3e81fd77"

Any help would be appreciated
or a appropriate group to ask for help.

Thank you all,

Joseph.

[Michael Solomon \(MS-MVP Windows Shell/User\)]

What CD burning software and version is installed on your system. That
would seem to be the likely culprit. This error is common with incompatible
burning software being installed or if the software was reinstalled or if
the OS was reinstalled over itself, all of which would require the software,
if a compatible version, be reinstalled or possibly removed and reinstalled.

--
Michael Solomon MS-MVP
Windows Shell/User
Backup is a PC User's Best Friend
DTS-L.Org: http://www.dts-l.org/

"Joseph Minelli" > wrote in message
...
> my cdrw drive for some reason,
> I have a cdrw external drive
> and it worked for months
> but out of the blue, I'm getting
> this error and I even got a new
> cdrw drive for my cd rom drive
> and I still get this error, here it is:
>
> "A problem has been detected and windows has been shut down to prevent
> damage to your computer.
>
> If this is the first time you've seen this Stop error screen,
> restart your computer, If this screen appears again, follow these
> steps:
>
> Check to be sure you have adequate disk space.
> If a driver is identified in the Stop message, disable the driver or
> check with the manufacturer for driver updates. Try changing video
> adapters.
>
> Check with your hardware vender for any BIOS updates.
> Disable BIOS memory options such as caching or shadowing.
> If you need to use Safe Mode to remove or disable components,
> restart your computer, press F8 to select Advanced Startup Options,
> and then select Same Mode.
>
> Technical information:
>
> *** STOP: 0*0000007E (0*C0000005.0*F87D7AD9.0*F8AC572C.0*F8AC542)
>
> *** Cdr4_*p. SYS - Address F87D7AD9 base at F87D6000. DateStamp
> 3e81fd77"
>
> Any help would be appreciated
> or a appropriate group to ask for help.
>
> Thank you all,
>
> Joseph.