PDA

View Full Version : New motherboard


Saul Rodriguez
December 6th 03, 02:09 PM
I am actually using Windows XP Professional in a 700 MHz computer. I am
planing to upgrade my machine by changing the mother board to a 2.2 GHz. My
questions are:

Can I just change the mother board? , or do I have to perform some kind of
system configuration?

If this is not possible and I have to reinstall the operating system with
the new motherboard (as if it were a new machine).
How can I activate it in the new machine? There is a method that you can
tell MS that you are removing the operating system from one machine and
installing it in another?

thanks,

Saul

Nicholas
December 6th 03, 02:09 PM
Saul --

Changing a Motherboard or Moving a Hard Drive with XP Installed
http://michaelstevenstech.com/moving_xp.html

[Courtesy of Michael Stevens, MS-MVP]


--=20
Nicholas

-------------------------------------------------------------------------=
----------------------

"Saul Rodriguez" > wrote in message:
...

| I am actually using Windows XP Professional in a 700 MHz computer. I =
am
| planing to upgrade my machine by changing the mother board to a 2.2 =
GHz. My
| questions are:
|=20
| Can I just change the mother board? , or do I have to perform some =
kind of
| system configuration?
|=20
| If this is not possible and I have to reinstall the operating system =
with
| the new motherboard (as if it were a new machine).
| How can I activate it in the new machine? There is a method that you =
can
| tell MS that you are removing the operating system from one machine =
and
| installing it in another?
|=20
| thanks,
|=20
| Saul
|=20
|

Bruce Chambers
December 6th 03, 02:09 PM
Greetings --

Unless the new motherboard is virtually identical to the old one
(same chipset, same IDE controllers, same BIOS version, etc.), you'll
need to perform a repair (a.k.a. in-place upgrade) installation, at
the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

As always when undertaking such a significant change, back up any
important data before starting.

This will also require re-activation. If it's been more than 120
days since you last activated that specific Product Key, you'll most
likely be able to activate via the internet without problem. If it's
been less, you might have to make a 5 minute phone call.


Bruce Chambers

--
Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html

You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH


"Saul Rodriguez" > wrote in message
...
> I am actually using Windows XP Professional in a 700 MHz computer. I
am
> planing to upgrade my machine by changing the mother board to a 2.2
GHz. My
> questions are:
>
> Can I just change the mother board? , or do I have to perform some
kind of
> system configuration?
>
> If this is not possible and I have to reinstall the operating
system with
> the new motherboard (as if it were a new machine).
> How can I activate it in the new machine? There is a method that
you can
> tell MS that you are removing the operating system from one machine
and
> installing it in another?
>
> thanks,
>
> Saul
>
>

Google