dv capture

[yung]

i link my sony trv-9e to ieee1394 port of my computer
with windows xp and try to capture dv with movie maker 2
or mgi video wave 4, but it fails. device manager shows
both sony camcorder and 1394, and when i use movie maker
or video wave, both softwares can control my dv, but
nothing's shown in the view pane. when i capture in dv-
avi format, it prompts that "no response with dv device,
pls check whether device is connected and opened". i've
tried 2 different 1394 ports with 2 different cables, and
have uninstall and re-install the nec 1394 driver, but it
doesn't help. anyone can help?
thanks.

yung

[Capture Boy]

when you connect your camera to the firewire card does xp give you a pop up
about the new hardware being recognised?

are you setting the camera to video recorder mode?

is your camera dv input and output enabled, i know the uk versions of the
trv9 are not by default (needs modifying), my hong kong PAL trv9 has both
enabled. The computer is maybe having problems talking to the camera because
the input into the camera is not enabled.

The reason you are seing the camera on your device manager list is because
the camera is talking to the computer because DV output is enabled.

"yung" > wrote in message
...
> i link my sony trv-9e to ieee1394 port of my computer
> with windows xp and try to capture dv with movie maker 2
> or mgi video wave 4, but it fails. device manager shows
> both sony camcorder and 1394, and when i use movie maker
> or video wave, both softwares can control my dv, but
> nothing's shown in the view pane. when i capture in dv-
> avi format, it prompts that "no response with dv device,
> pls check whether device is connected and opened". i've
> tried 2 different 1394 ports with 2 different cables, and
> have uninstall and re-install the nec 1394 driver, but it
> doesn't help. anyone can help?
> thanks.
>
> yung

[yung]

thank you for ur info. xp does pop up about the new
hardware. i set the camera to vtr mode. how can i
enable my camera dv input and output?

>-----Original Message-----
>when you connect your camera to the firewire card does
xp give you a pop up
>about the new hardware being recognised?
>
>are you setting the camera to video recorder mode?
>
>is your camera dv input and output enabled, i know the
uk versions of the
>trv9 are not by default (needs modifying), my hong kong
PAL trv9 has both
>enabled. The computer is maybe having problems talking
to the camera because
>the input into the camera is not enabled.
>
>The reason you are seing the camera on your device
manager list is because
>the camera is talking to the computer because DV output
is enabled.
>
>"yung" > wrote in
message
...
>> i link my sony trv-9e to ieee1394 port of my computer
>> with windows xp and try to capture dv with movie maker
2
>> or mgi video wave 4, but it fails. device manager
shows
>> both sony camcorder and 1394, and when i use movie
maker
>> or video wave, both softwares can control my dv, but
>> nothing's shown in the view pane. when i capture in dv-
>> avi format, it prompts that "no response with dv
device,
>> pls check whether device is connected and opened".
i've
>> tried 2 different 1394 ports with 2 different cables,
and
>> have uninstall and re-install the nec 1394 driver, but
it
>> doesn't help. anyone can help?
>> thanks.
>>
>> yung
>
>
>.
>

[Capture Boy]

I am not sure but I believe you can buy a "dongle" for it. might taking some
finding as the camera is about 5 years old now. most DV cameras sold now are
input/output enabled, if not don't buy it.

A local independent repair place might be willing to have a go at a
conversion, not sure what it entails, but the warranty is already up anyway
so it will not affect warranty.

"yung" > wrote in message
...
> thank you for ur info. xp does pop up about the new
> hardware. i set the camera to vtr mode. how can i
> enable my camera dv input and output?
>
> >-----Original Message-----
> >when you connect your camera to the firewire card does
> xp give you a pop up
> >about the new hardware being recognised?
> >
> >are you setting the camera to video recorder mode?
> >
> >is your camera dv input and output enabled, i know the
> uk versions of the
> >trv9 are not by default (needs modifying), my hong kong
> PAL trv9 has both
> >enabled. The computer is maybe having problems talking
> to the camera because
> >the input into the camera is not enabled.
> >
> >The reason you are seing the camera on your device
> manager list is because
> >the camera is talking to the computer because DV output
> is enabled.
> >
> >"yung" > wrote in
> message
> ...
> >> i link my sony trv-9e to ieee1394 port of my computer
> >> with windows xp and try to capture dv with movie maker
> 2
> >> or mgi video wave 4, but it fails. device manager
> shows
> >> both sony camcorder and 1394, and when i use movie
> maker
> >> or video wave, both softwares can control my dv, but
> >> nothing's shown in the view pane. when i capture in dv-
> >> avi format, it prompts that "no response with dv
> device,
> >> pls check whether device is connected and opened".
> i've
> >> tried 2 different 1394 ports with 2 different cables,
> and
> >> have uninstall and re-install the nec 1394 driver, but
> it
> >> doesn't help. anyone can help?
> >> thanks.
> >>
> >> yung
> >
> >
> >.
> >

[yung]

then what would u suggest i to do?

>-----Original Message-----
>It shouild be enabled by default, unless you are in
Europe and then you'll
>find that DV Out is enabled, but not DV-In.
>
>Cari
>www.coribright.com
>
>"yung" > wrote in
message
...
>> thank you for ur info. xp does pop up about the new
>> hardware. i set the camera to vtr mode. how can i
>> enable my camera dv input and output?
>>
>>>-----Original Message-----
>>>when you connect your camera to the firewire card does
>> xp give you a pop up
>>>about the new hardware being recognised?
>>>
>>>are you setting the camera to video recorder mode?
>>>
>>>is your camera dv input and output enabled, i know the
>> uk versions of the
>>>trv9 are not by default (needs modifying), my hong kong
>> PAL trv9 has both
>>>enabled. The computer is maybe having problems talking
>> to the camera because
>>>the input into the camera is not enabled.
>>>
>>>The reason you are seing the camera on your device
>> manager list is because
>>>the camera is talking to the computer because DV output
>> is enabled.
>>>
>>>"yung" > wrote in
>> message
...
>>>> i link my sony trv-9e to ieee1394 port of my computer
>>>> with windows xp and try to capture dv with movie
maker
>> 2
>>>> or mgi video wave 4, but it fails. device manager
>> shows
>>>> both sony camcorder and 1394, and when i use movie
>> maker
>>>> or video wave, both softwares can control my dv, but
>>>> nothing's shown in the view pane. when i capture in
dv-
>>>> avi format, it prompts that "no response with dv
>> device,
>>>> pls check whether device is connected and opened".
>> i've
>>>> tried 2 different 1394 ports with 2 different cables,
>> and
>>>> have uninstall and re-install the nec 1394 driver,
but
>> it
>>>> doesn't help. anyone can help?
>>>> thanks.
>>>>
>>>> yung
>>>
>>>
>>>.
>>>
>
>
>.
>

[Capture Boy]

did you buy the camera in europe?

"yung" > wrote in message
...
> then what would u suggest i to do?
>
> >-----Original Message-----
> >It shouild be enabled by default, unless you are in
> Europe and then you'll
> >find that DV Out is enabled, but not DV-In.
> >
> >Cari
> >www.coribright.com
> >
> >"yung" > wrote in
> message
> ...
> >> thank you for ur info. xp does pop up about the new
> >> hardware. i set the camera to vtr mode. how can i
> >> enable my camera dv input and output?
> >>
> >>>-----Original Message-----
> >>>when you connect your camera to the firewire card does
> >> xp give you a pop up
> >>>about the new hardware being recognised?
> >>>
> >>>are you setting the camera to video recorder mode?
> >>>
> >>>is your camera dv input and output enabled, i know the
> >> uk versions of the
> >>>trv9 are not by default (needs modifying), my hong kong
> >> PAL trv9 has both
> >>>enabled. The computer is maybe having problems talking
> >> to the camera because
> >>>the input into the camera is not enabled.
> >>>
> >>>The reason you are seing the camera on your device
> >> manager list is because
> >>>the camera is talking to the computer because DV output
> >> is enabled.
> >>>
> >>>"yung" > wrote in
> >> message
> ...
> >>>> i link my sony trv-9e to ieee1394 port of my computer
> >>>> with windows xp and try to capture dv with movie
> maker
> >> 2
> >>>> or mgi video wave 4, but it fails. device manager
> >> shows
> >>>> both sony camcorder and 1394, and when i use movie
> >> maker
> >>>> or video wave, both softwares can control my dv, but
> >>>> nothing's shown in the view pane. when i capture in
> dv-
> >>>> avi format, it prompts that "no response with dv
> >> device,
> >>>> pls check whether device is connected and opened".
> >> i've
> >>>> tried 2 different 1394 ports with 2 different cables,
> >> and
> >>>> have uninstall and re-install the nec 1394 driver,
> but
> >> it
> >>>> doesn't help. anyone can help?
> >>>> thanks.
> >>>>
> >>>> yung
> >>>
> >>>
> >>>.
> >>>
> >
> >
> >.
> >

[yung]

no, in hong kong

>-----Original Message-----
>did you buy the camera in europe?
>
>"yung" > wrote in
message
...
>> then what would u suggest i to do?
>>
>> >-----Original Message-----
>> >It shouild be enabled by default, unless you are in
>> Europe and then you'll
>> >find that DV Out is enabled, but not DV-In.
>> >
>> >Cari
>> >www.coribright.com
>> >
>> >"yung" > wrote in
>> message
>> ...
>> >> thank you for ur info. xp does pop up about the new
>> >> hardware. i set the camera to vtr mode. how can i
>> >> enable my camera dv input and output?
>> >>
>> >>>-----Original Message-----
>> >>>when you connect your camera to the firewire card
does
>> >> xp give you a pop up
>> >>>about the new hardware being recognised?
>> >>>
>> >>>are you setting the camera to video recorder mode?
>> >>>
>> >>>is your camera dv input and output enabled, i know
the
>> >> uk versions of the
>> >>>trv9 are not by default (needs modifying), my hong
kong
>> >> PAL trv9 has both
>> >>>enabled. The computer is maybe having problems
talking
>> >> to the camera because
>> >>>the input into the camera is not enabled.
>> >>>
>> >>>The reason you are seing the camera on your device
>> >> manager list is because
>> >>>the camera is talking to the computer because DV
output
>> >> is enabled.
>> >>>
>> >>>"yung" > wrote
in
>> >> message
>> ...
>> >>>> i link my sony trv-9e to ieee1394 port of my
computer
>> >>>> with windows xp and try to capture dv with movie
>> maker
>> >> 2
>> >>>> or mgi video wave 4, but it fails. device manager
>> >> shows
>> >>>> both sony camcorder and 1394, and when i use movie
>> >> maker
>> >>>> or video wave, both softwares can control my dv,
but
>> >>>> nothing's shown in the view pane. when i capture
in
>> dv-
>> >>>> avi format, it prompts that "no response with dv
>> >> device,
>> >>>> pls check whether device is connected and opened".
>> >> i've
>> >>>> tried 2 different 1394 ports with 2 different
cables,
>> >> and
>> >>>> have uninstall and re-install the nec 1394 driver,
>> but
>> >> it
>> >>>> doesn't help. anyone can help?
>> >>>> thanks.
>> >>>>
>> >>>> yung
>> >>>
>> >>>
>> >>>.
>> >>>
>> >
>> >
>> >.
>> >
>
>
>.
>

[Capture Boy]

That is where I bought mine, should be DV In/Out enabled as standard.

not exactly sure what the solution is I'm afraid.

Have you tried connecting another DV camera to your computer?

"yung" > wrote in message
...
> no, in hong kong
>
> >-----Original Message-----
> >did you buy the camera in europe?
> >
> >"yung" > wrote in
> message
> ...
> >> then what would u suggest i to do?
> >>
> >> >-----Original Message-----
> >> >It shouild be enabled by default, unless you are in
> >> Europe and then you'll
> >> >find that DV Out is enabled, but not DV-In.
> >> >
> >> >Cari
> >> >www.coribright.com
> >> >
> >> >"yung" > wrote in
> >> message
> >> ...
> >> >> thank you for ur info. xp does pop up about the new
> >> >> hardware. i set the camera to vtr mode. how can i
> >> >> enable my camera dv input and output?
> >> >>
> >> >>>-----Original Message-----
> >> >>>when you connect your camera to the firewire card
> does
> >> >> xp give you a pop up
> >> >>>about the new hardware being recognised?
> >> >>>
> >> >>>are you setting the camera to video recorder mode?
> >> >>>
> >> >>>is your camera dv input and output enabled, i know
> the
> >> >> uk versions of the
> >> >>>trv9 are not by default (needs modifying), my hong
> kong
> >> >> PAL trv9 has both
> >> >>>enabled. The computer is maybe having problems
> talking
> >> >> to the camera because
> >> >>>the input into the camera is not enabled.
> >> >>>
> >> >>>The reason you are seing the camera on your device
> >> >> manager list is because
> >> >>>the camera is talking to the computer because DV
> output
> >> >> is enabled.
> >> >>>
> >> >>>"yung" > wrote
> in
> >> >> message
> >> ...
> >> >>>> i link my sony trv-9e to ieee1394 port of my
> computer
> >> >>>> with windows xp and try to capture dv with movie
> >> maker
> >> >> 2
> >> >>>> or mgi video wave 4, but it fails. device manager
> >> >> shows
> >> >>>> both sony camcorder and 1394, and when i use movie
> >> >> maker
> >> >>>> or video wave, both softwares can control my dv,
> but
> >> >>>> nothing's shown in the view pane. when i capture
> in
> >> dv-
> >> >>>> avi format, it prompts that "no response with dv
> >> >> device,
> >> >>>> pls check whether device is connected and opened".
> >> >> i've
> >> >>>> tried 2 different 1394 ports with 2 different
> cables,
> >> >> and
> >> >>>> have uninstall and re-install the nec 1394 driver,
> >> but
> >> >> it
> >> >>>> doesn't help. anyone can help?
> >> >>>> thanks.
> >> >>>>
> >> >>>> yung
> >> >>>
> >> >>>
> >> >>>.
> >> >>>
> >> >
> >> >
> >> >.
> >> >
> >
> >
> >.
> >

[yung]

hey, i finally solve my dv capture problem and may share
with those with the same problem. i have to turn on my
sony camcorder before turning on the computer. with this
order movie softwares can capture dv input, otherwise
can't. it appears very weird that if i turn on the
computer first and then the camcorder, dv can't be
captured, with the camcorder's still on and reboot the
computer, it doesn't work too. the only success order is
to turn off the computer, switch on the camcorder, and
then turn on the computer again. any one know the reason?

>-----Original Message-----
>That is where I bought mine, should be DV In/Out enabled
as standard.
>
>not exactly sure what the solution is I'm afraid.
>
>Have you tried connecting another DV camera to your
computer?
>
>"yung" > wrote in
message
...
>> no, in hong kong
>>
>> >-----Original Message-----
>> >did you buy the camera in europe?
>> >
>> >"yung" > wrote in
>> message
>> ...
>> >> then what would u suggest i to do?
>> >>
>> >> >-----Original Message-----
>> >> >It shouild be enabled by default, unless you are in
>> >> Europe and then you'll
>> >> >find that DV Out is enabled, but not DV-In.
>> >> >
>> >> >Cari
>> >> >www.coribright.com
>> >> >
>> >> >"yung" > wrote
in
>> >> message
>> >> ...
>> >> >> thank you for ur info. xp does pop up about the
new
>> >> >> hardware. i set the camera to vtr mode. how
can i
>> >> >> enable my camera dv input and output?
>> >> >>
>> >> >>>-----Original Message-----
>> >> >>>when you connect your camera to the firewire card
>> does
>> >> >> xp give you a pop up
>> >> >>>about the new hardware being recognised?
>> >> >>>
>> >> >>>are you setting the camera to video recorder
mode?
>> >> >>>
>> >> >>>is your camera dv input and output enabled, i
know
>> the
>> >> >> uk versions of the
>> >> >>>trv9 are not by default (needs modifying), my
hong
>> kong
>> >> >> PAL trv9 has both
>> >> >>>enabled. The computer is maybe having problems
>> talking
>> >> >> to the camera because
>> >> >>>the input into the camera is not enabled.
>> >> >>>
>> >> >>>The reason you are seing the camera on your
device
>> >> >> manager list is because
>> >> >>>the camera is talking to the computer because DV
>> output
>> >> >> is enabled.
>> >> >>>
>> >> >>>"yung" >
wrote
>> in
>> >> >> message
>> >> ...
>> >> >>>> i link my sony trv-9e to ieee1394 port of my
>> computer
>> >> >>>> with windows xp and try to capture dv with
movie
>> >> maker
>> >> >> 2
>> >> >>>> or mgi video wave 4, but it fails. device
manager
>> >> >> shows
>> >> >>>> both sony camcorder and 1394, and when i use
movie
>> >> >> maker
>> >> >>>> or video wave, both softwares can control my
dv,
>> but
>> >> >>>> nothing's shown in the view pane. when i
capture
>> in
>> >> dv-
>> >> >>>> avi format, it prompts that "no response with
dv
>> >> >> device,
>> >> >>>> pls check whether device is connected and
opened".
>> >> >> i've
>> >> >>>> tried 2 different 1394 ports with 2 different
>> cables,
>> >> >> and
>> >> >>>> have uninstall and re-install the nec 1394
driver,
>> >> but
>> >> >> it
>> >> >>>> doesn't help. anyone can help?
>> >> >>>> thanks.
>> >> >>>>
>> >> >>>> yung
>> >> >>>
>> >> >>>
>> >> >>>.
>> >> >>>
>> >> >
>> >> >
>> >> >.
>> >> >
>> >
>> >
>> >.
>> >
>
>
>.
>

[Capture Boy]

Are you plugging the firewire cable into the camera with the computer on? I
am surprised that XP does not recognise the new hardware when you then
switch the camera on after plugging it in.

I have no problem with my TRV9E camera bought in HK, plugging the firewire
cable into the camera and then turning the camera on, with the computer
running XP.

"yung" > wrote in message
...
> hey, i finally solve my dv capture problem and may share
> with those with the same problem. i have to turn on my
> sony camcorder before turning on the computer. with this
> order movie softwares can capture dv input, otherwise
> can't. it appears very weird that if i turn on the
> computer first and then the camcorder, dv can't be
> captured, with the camcorder's still on and reboot the
> computer, it doesn't work too. the only success order is
> to turn off the computer, switch on the camcorder, and
> then turn on the computer again. any one know the reason?
>
> >-----Original Message-----
> >That is where I bought mine, should be DV In/Out enabled
> as standard.
> >
> >not exactly sure what the solution is I'm afraid.
> >
> >Have you tried connecting another DV camera to your
> computer?
> >
> >"yung" > wrote in
> message
> ...
> >> no, in hong kong
> >>
> >> >-----Original Message-----
> >> >did you buy the camera in europe?
> >> >
> >> >"yung" > wrote in
> >> message
> >> ...
> >> >> then what would u suggest i to do?
> >> >>
> >> >> >-----Original Message-----
> >> >> >It shouild be enabled by default, unless you are in
> >> >> Europe and then you'll
> >> >> >find that DV Out is enabled, but not DV-In.
> >> >> >
> >> >> >Cari
> >> >> >www.coribright.com
> >> >> >
> >> >> >"yung" > wrote
> in
> >> >> message
> >> >> ...
> >> >> >> thank you for ur info. xp does pop up about the
> new
> >> >> >> hardware. i set the camera to vtr mode. how
> can i
> >> >> >> enable my camera dv input and output?
> >> >> >>
> >> >> >>>-----Original Message-----
> >> >> >>>when you connect your camera to the firewire card
> >> does
> >> >> >> xp give you a pop up
> >> >> >>>about the new hardware being recognised?
> >> >> >>>
> >> >> >>>are you setting the camera to video recorder
> mode?
> >> >> >>>
> >> >> >>>is your camera dv input and output enabled, i
> know
> >> the
> >> >> >> uk versions of the
> >> >> >>>trv9 are not by default (needs modifying), my
> hong
> >> kong
> >> >> >> PAL trv9 has both
> >> >> >>>enabled. The computer is maybe having problems
> >> talking
> >> >> >> to the camera because
> >> >> >>>the input into the camera is not enabled.
> >> >> >>>
> >> >> >>>The reason you are seing the camera on your
> device
> >> >> >> manager list is because
> >> >> >>>the camera is talking to the computer because DV
> >> output
> >> >> >> is enabled.
> >> >> >>>
> >> >> >>>"yung" >
> wrote
> >> in
> >> >> >> message
> >> >> ...
> >> >> >>>> i link my sony trv-9e to ieee1394 port of my
> >> computer
> >> >> >>>> with windows xp and try to capture dv with
> movie
> >> >> maker
> >> >> >> 2
> >> >> >>>> or mgi video wave 4, but it fails. device
> manager
> >> >> >> shows
> >> >> >>>> both sony camcorder and 1394, and when i use
> movie
> >> >> >> maker
> >> >> >>>> or video wave, both softwares can control my
> dv,
> >> but
> >> >> >>>> nothing's shown in the view pane. when i
> capture
> >> in
> >> >> dv-
> >> >> >>>> avi format, it prompts that "no response with
> dv
> >> >> >> device,
> >> >> >>>> pls check whether device is connected and
> opened".
> >> >> >> i've
> >> >> >>>> tried 2 different 1394 ports with 2 different
> >> cables,
> >> >> >> and
> >> >> >>>> have uninstall and re-install the nec 1394
> driver,
> >> >> but
> >> >> >> it
> >> >> >>>> doesn't help. anyone can help?
> >> >> >>>> thanks.
> >> >> >>>>
> >> >> >>>> yung
> >> >> >>>
> >> >> >>>
> >> >> >>>.
> >> >> >>>
> >> >> >
> >> >> >
> >> >> >.
> >> >> >
> >> >
> >> >
> >> >.
> >> >
> >
> >
> >.
> >

[Cari \(MS-MVP\)]

It shouild be enabled by default, unless you are in Europe and then you'll
find that DV Out is enabled, but not DV-In.

Cari
www.coribright.com

"yung" > wrote in message
...
> thank you for ur info. xp does pop up about the new
> hardware. i set the camera to vtr mode. how can i
> enable my camera dv input and output?
>
>>-----Original Message-----
>>when you connect your camera to the firewire card does
> xp give you a pop up
>>about the new hardware being recognised?
>>
>>are you setting the camera to video recorder mode?
>>
>>is your camera dv input and output enabled, i know the
> uk versions of the
>>trv9 are not by default (needs modifying), my hong kong
> PAL trv9 has both
>>enabled. The computer is maybe having problems talking
> to the camera because
>>the input into the camera is not enabled.
>>
>>The reason you are seing the camera on your device
> manager list is because
>>the camera is talking to the computer because DV output
> is enabled.
>>
>>"yung" > wrote in
> message
...
>>> i link my sony trv-9e to ieee1394 port of my computer
>>> with windows xp and try to capture dv with movie maker
> 2
>>> or mgi video wave 4, but it fails. device manager
> shows
>>> both sony camcorder and 1394, and when i use movie
> maker
>>> or video wave, both softwares can control my dv, but
>>> nothing's shown in the view pane. when i capture in dv-
>>> avi format, it prompts that "no response with dv
> device,
>>> pls check whether device is connected and opened".
> i've
>>> tried 2 different 1394 ports with 2 different cables,
> and
>>> have uninstall and re-install the nec 1394 driver, but
> it
>>> doesn't help. anyone can help?
>>> thanks.
>>>
>>> yung
>>
>>
>>.
>>