Mark
March 9th 04, 05:01 PM
I have logitech cordless mouse and keyboard set up for my laptop, when using
autocad I can be happily working for hours then all of a sudden the lights
go out on the receiver unit for the mouse and keyboard so I get no use of
either then within 10 seconds my whole system crashes (I usually notice this
quite quickly so have time to save on autocad using the laptop keyboard,
which still works), I get a blue dos screen with loads of white text on,
look below to see what this error message says. I always use the keyboard
and mouse and only have this problem when using autocad. I have the latest
drivers for the keyboard and mouse and because this problem is only when
using autocad logitech can't
help me, they have never heard of this problem, Autodesk aren't much help
either. my system is p4 2.5Ghz, 1GB Ram, 64MB graphics, running windows xp
pro, this problem happens on both autocad r14 and 2004.
any help would be greatly appreciated,
TIA
Mark
The error mesage says:
A problem has been detected and windows has been shut down to prevent damage
to your computer.
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen, restart your
computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed. If
this is a new intallation, ask your hardware or software manufacturar for
any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or
software. Disable BIOS memory options such as caching or shadowing. If you
need to use Safe Mode to remove or disable components, restart your
computer, press F8 to select Advanced Startup Options, and then select Safe
Mode.
Technical Inforamtion:
*** STOP: 0x000000D1 (0xF7A32EA2, 0x00000002, 0x00000000, 0xF7A32EA2)
*** LHidusb.Sys - Address F7A32EA2 dase at F7A32EA2, DateStamp 00000000
*** LHidusb.Sys - Address F7A32EA2 dase at F7A32EA2, DateStamp 00000000
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further
assistance.
autocad I can be happily working for hours then all of a sudden the lights
go out on the receiver unit for the mouse and keyboard so I get no use of
either then within 10 seconds my whole system crashes (I usually notice this
quite quickly so have time to save on autocad using the laptop keyboard,
which still works), I get a blue dos screen with loads of white text on,
look below to see what this error message says. I always use the keyboard
and mouse and only have this problem when using autocad. I have the latest
drivers for the keyboard and mouse and because this problem is only when
using autocad logitech can't
help me, they have never heard of this problem, Autodesk aren't much help
either. my system is p4 2.5Ghz, 1GB Ram, 64MB graphics, running windows xp
pro, this problem happens on both autocad r14 and 2004.
any help would be greatly appreciated,
TIA
Mark
The error mesage says:
A problem has been detected and windows has been shut down to prevent damage
to your computer.
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen, restart your
computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed. If
this is a new intallation, ask your hardware or software manufacturar for
any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or
software. Disable BIOS memory options such as caching or shadowing. If you
need to use Safe Mode to remove or disable components, restart your
computer, press F8 to select Advanced Startup Options, and then select Safe
Mode.
Technical Inforamtion:
*** STOP: 0x000000D1 (0xF7A32EA2, 0x00000002, 0x00000000, 0xF7A32EA2)
*** LHidusb.Sys - Address F7A32EA2 dase at F7A32EA2, DateStamp 00000000
*** LHidusb.Sys - Address F7A32EA2 dase at F7A32EA2, DateStamp 00000000
Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further
assistance.