Dwayne
April 20th 03, 06:41 AM
>-----Original Message-----
>LINKSYS LNE100TX - EtherFast=AE 10/100 LAN Card (v4)
>
>Had this card installed before, windows recognised right=20
away when I plugged
>in the card (thought the internet i think cant be sure).=20
but took it out a
>while back as it was no longer needed. Now I need it back=20
in, plugged it in
>[the same slot when it worked, PCI slot 6], used the=20
Harware Update Wizard
>(with online search as well), but reports ; harware not=20
installed because
>the wizard could not find the necessary software. =20
Downloaded the drivers
>from the Linksys website, no xp drivers, so tried Win200=20
drivers, seemed to
>install with no problem. Rebooted as asked, but upon=20
rebooting device
>manager reports there is a problem with it. The problem=20
is that there is not
>enougth system resources for this device, and recomended=20
to unistall some
>harware devices. But
>
>
>Resource Device Status
>
>IRQ 0 System timer OK
>IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2=20
Keyboard OK
>IRQ 2 *FREE*
>IRQ 3 Intel(r) 82801BA/BAM USB Universal Host Controller -
2444 OK
>IRQ 4 Communications Port (COM1) OK
>IRQ 5 OHCI Compliant IEEE 1394 Host Controller OK
>IRQ 6 Intel(r) 82801BA/BAM USB Universal Host Controller -
2442 OK
>IRQ 7 *FREE*
>IRQ 8 System CMOS/real time clock OK
>IRQ 9 Microsoft ACPI-Compliant System OK
>IRQ 10 NVIDIA GeForce3 Ti 500 OK
>IRQ 11 Ethernet Controller OK
>IRQ 12 Creative SB Audigy OK
>IRQ 13 Numeric data processor OK
>IRQ 14 Primary IDE Channel OK
>IRQ 15 Secondary IDE Channel OK
>
>em, ok dont understand why it thinks there is not enough=20
system resources.
>got 2 free IRQs, when the net card was installed before=20
i also had a TV
>card, but has been removed. so im totaly bugger if i=20
know. theres nothing on
>the linksys website about this
>
>Any one gat any ideas
>
>
>.
>2 is not free it is redirect to 9=20
you might want to see if you can free 11 and then try to=20
install the NIC again incase it is looking for it the=20
first time you installed it and now not getting it
Also look in Device Manager in SM under Network adapter=20
and remove anything listed there before you plug it in=20
just to make sure it is not an issue with ghost drivers
>LINKSYS LNE100TX - EtherFast=AE 10/100 LAN Card (v4)
>
>Had this card installed before, windows recognised right=20
away when I plugged
>in the card (thought the internet i think cant be sure).=20
but took it out a
>while back as it was no longer needed. Now I need it back=20
in, plugged it in
>[the same slot when it worked, PCI slot 6], used the=20
Harware Update Wizard
>(with online search as well), but reports ; harware not=20
installed because
>the wizard could not find the necessary software. =20
Downloaded the drivers
>from the Linksys website, no xp drivers, so tried Win200=20
drivers, seemed to
>install with no problem. Rebooted as asked, but upon=20
rebooting device
>manager reports there is a problem with it. The problem=20
is that there is not
>enougth system resources for this device, and recomended=20
to unistall some
>harware devices. But
>
>
>Resource Device Status
>
>IRQ 0 System timer OK
>IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2=20
Keyboard OK
>IRQ 2 *FREE*
>IRQ 3 Intel(r) 82801BA/BAM USB Universal Host Controller -
2444 OK
>IRQ 4 Communications Port (COM1) OK
>IRQ 5 OHCI Compliant IEEE 1394 Host Controller OK
>IRQ 6 Intel(r) 82801BA/BAM USB Universal Host Controller -
2442 OK
>IRQ 7 *FREE*
>IRQ 8 System CMOS/real time clock OK
>IRQ 9 Microsoft ACPI-Compliant System OK
>IRQ 10 NVIDIA GeForce3 Ti 500 OK
>IRQ 11 Ethernet Controller OK
>IRQ 12 Creative SB Audigy OK
>IRQ 13 Numeric data processor OK
>IRQ 14 Primary IDE Channel OK
>IRQ 15 Secondary IDE Channel OK
>
>em, ok dont understand why it thinks there is not enough=20
system resources.
>got 2 free IRQs, when the net card was installed before=20
i also had a TV
>card, but has been removed. so im totaly bugger if i=20
know. theres nothing on
>the linksys website about this
>
>Any one gat any ideas
>
>
>.
>2 is not free it is redirect to 9=20
you might want to see if you can free 11 and then try to=20
install the NIC again incase it is looking for it the=20
first time you installed it and now not getting it
Also look in Device Manager in SM under Network adapter=20
and remove anything listed there before you plug it in=20
just to make sure it is not an issue with ghost drivers