LS-120

[Roger Mackey]

I have a LS-120 attached to an IDE channel. The Bios on my
motherboard recognizes it properly but Windows XP thinks
it is a standard 3.5" floppy and won't recognize or format
the SuperDisk'z.
Does anybody know how to get XP to recognize it properly?

Roger

[Nicholas]

Floppy Disk Formats That Are Supported in Windows XP
http://support.microsoft.com/default.aspx?scid=3Dkb;en-us;309623


--=20
Nicholas

------------------------------------------------------------------------

"Roger Mackey" > wrote in message: =20
...

| I have a LS-120 attached to an IDE channel. The Bios on my=20
| motherboard recognizes it properly but Windows XP thinks=20
| it is a standard 3.5" floppy and won't recognize or format=20
| the SuperDisk'z.
| Does anybody know how to get XP to recognize it properly?
|=20
| Roger

[Roger]

The LS-120 is not a standard floppy drive and is listed in
the Windows Catalog as a XP compaatible drive under
removable media drives. It will format the standard floppy
formats with not trouble.
>-----Original Message-----
>Floppy Disk Formats That Are Supported in Windows XP
>http://support.microsoft.com/default.aspx?scid=kb;en-
us;309623
>
>
>--
>Nicholas
>
>----------------------------------------------------------
--------------
>
>"Roger Mackey" > wrote in message:
...
>
>| I have a LS-120 attached to an IDE channel. The Bios on
my
>| motherboard recognizes it properly but Windows XP
thinks
>| it is a standard 3.5" floppy and won't recognize or
format
>| the SuperDisk'z.
>| Does anybody know how to get XP to recognize it
properly?
>|
>| Roger
>.
>

[Rich Barry]

In the Bios disable both floppy A and B and also the Floppy
Controller.
"Roger Mackey" > wrote in message
...
> I have a LS-120 attached to an IDE channel. The Bios on my
> motherboard recognizes it properly but Windows XP thinks
> it is a standard 3.5" floppy and won't recognize or format
> the SuperDisk'z.
> Does anybody know how to get XP to recognize it properly?
>
> Roger

[ivorh]

I also have a LS120Mb floppy, running as slave with the hard-drive on IDE 1,
and CD copy as master & DVD as slave on IDE 2. all drive's run ok on windows
XP pro.

--

Ivor.
Suffolk, United Kingdom


"Roger Mackey" > wrote in message
...
> I have a LS-120 attached to an IDE channel. The Bios on my
> motherboard recognizes it properly but Windows XP thinks
> it is a standard 3.5" floppy and won't recognize or format
> the SuperDisk'z.
> Does anybody know how to get XP to recognize it properly?
>
> Roger