Michael
April 26th 03, 02:50 PM
Might try going into the bios setup and checking it there
to see if it reads it, then saving the bios setup. The
other post about memory in pair is old technology. I've
not seen a pc in years that required that unless you
really are running RDRAM which I really doubt.
>-----Original Message-----
>Originally, my Pc holds 256 DRAM .
>I upgraded it by adding a memory slot of 128 DRAM.
>However, when I started the PC, it only reads 229.xxxxx
>Dram available in the PC .
>
>May I know how about to do so, so that the PC can detect
>the new memory ram that I slotted?
>
>Thank You
>.
>
to see if it reads it, then saving the bios setup. The
other post about memory in pair is old technology. I've
not seen a pc in years that required that unless you
really are running RDRAM which I really doubt.
>-----Original Message-----
>Originally, my Pc holds 256 DRAM .
>I upgraded it by adding a memory slot of 128 DRAM.
>However, when I started the PC, it only reads 229.xxxxx
>Dram available in the PC .
>
>May I know how about to do so, so that the PC can detect
>the new memory ram that I slotted?
>
>Thank You
>.
>