Fw: WinXP Pro SP1 - USB Problems- Not Enough Free Resources

[Marlie Phillips]

> I can't get it to recognize any USB device, how do I correct these
problems
> in the device manager? They all three have yellow exclamation points
saying
> not enough free resources available. I've tried disabling things I don't
> use and that still doesn't work. Any suggestions?
>
> Thanks.
> Marlie Phillips
>
>


> Problem Devices:
> NEC PCI to USB Enhanced Host Controller (B0)
> PCI\VEN_1033&DEV_00E0&SUBSYS_00E01033&REV_01\3&2C30BBFF&0&0AF0 This device
> cannot find enough free resources that it can use.
> NEC PCI to USB Open Host Controller
> PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&08F0 This device
> cannot find enough free resources that it can use.
> NEC PCI to USB Open Host Controller
> PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&09F0 This device
> cannot find enough free resources that it can use.
>
> OS: WinXP Pro 5.1.2600 SP1 Build 2600 w/most all critical updates
installed.
> System Type: X86-based PC
> Processor: X86 Family 15 Model 0 Stepping 7 Genuine Intel 1496Mhz
> BIOS Version/Date: Intel Corp. GB85010A, 86A.0078.P18.0110081719,
10/8/2001
> SMBIOS Version: 2.3
> Hardware Abstraction Layer Version = 5.1.2600.1106 (xpsp1.020828-1920)
> Total Physical Memory: 128Mb RIMM RAM

> Conflicts/Sharing:
>
> I/O Port 0x00000072-0x0000007F PCI bus
> I/O Port 0x00000072-0x0000007F Motherboard resources
>
> Memory Address 0x0001-0x0000 Motherboard resources
> Memory Address 0x0001-0x0000 Motherboard resources
> Memory Address 0x0001-0x0000 Motherboard resources
> Memory Address 0x0001-0x0000 Motherboard resources
> Memory Address 0x0001-0x0000 Motherboard resources
> Memory Address 0x0001-0x0000 Motherboard resources
> Memory Address 0x0001-0x0000 Motherboard resources
> Memory Address 0x0001-0x0000 Motherboard resources
>
> I/O Port 0x000003C0-0x000003DF Intel Processor to AGP Controller
> I/O Port 0x000003C0-0x000003DF 3D Prophet 4000XT
>
> IRQ 10 3Com 3C905TX-based Ethernet Adapter (Generic)
> IRQ 10 Intel(R) 82801BA/BAM SMBus Controller - 2443
>
> I/O Port 0x000000A2-0x000000BF PCI bus
> I/O Port 0x000000A2-0x000000BF Motherboard resources
>
> Memory Address 0xA0000-0xBFFFF Intel Processor to AGP Controller
> Memory Address 0xA0000-0xBFFFF 3D Prophet 4000XT
>
> I/O Port 0x000003B0-0x000003BB Intel Processor to AGP Controller
> I/O Port 0x000003B0-0x000003BB 3D Prophet 4000XT
>
> I/O Port 0x00000022-0x0000003F PCI bus
> I/O Port 0x00000022-0x0000003F Motherboard resources
>
> Components
> USB:
> Intel(r) 82801BA/BAM USB Universal Host Controller - 2442
> PCI\VEN_8086&DEV_2442&SUBSYS_47428086&REV_02\2&EBB567F&0&FA
> Intel(r) 82801BA/BAM USB Universal Host Controller - 2444
> PCI\VEN_8086&DEV_2444&SUBSYS_47428086&REV_02\2&EBB567F&0&FC
> NEC PCI to USB Enhanced Host Controller (B0)
> PCI\VEN_1033&DEV_00E0&SUBSYS_00E01033&REV_01\3&2C30BBFF&0&0AF0
> NEC PCI to USB Open Host Controller
> PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&08F0
> NEC PCI to USB Open Host Controller
> PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&09F0
> USB Root Hub USB\ROOT_HUB\3&10D553B0&0
> USB Root Hub USB\ROOT_HUB\3&1C227314&0
>
> IRQ's
> IRQ 0 System timer OK
> IRQ 1 PC/AT Enhanced PS/2 Keyboard (101/102-Key) OK
> IRQ 3 YAMAHA Native DS1 WDM Driver OK
> IRQ 4 Communications Port (COM1) OK
> IRQ 5 Intel(r) 82801BA/BAM USB Universal Host Controller - 2442 OK
> IRQ 6 Standard floppy disk controller OK
> IRQ 7 Printer Port (LPT1) OK
> IRQ 8 System CMOS/real time clock OK
> IRQ 9 Intel(r) 82801BA/BAM USB Universal Host Controller - 2444 OK
> IRQ 10 3Com 3C905TX-based Ethernet Adapter (Generic) OK
> IRQ 10 Intel(R) 82801BA/BAM SMBus Controller - 2443 OK
> IRQ 11 3D Prophet 4000XT OK
> IRQ 12 Microsoft PS/2 Mouse OK
> IRQ 13 Numeric data processor OK
> IRQ 14 Primary IDE Channel OK
> IRQ 15 Secondary IDE Channel OK
>
>

[Cari \(MS-MVP\)]

Ensure ACPI is set correctly in the BIOS and then try disabling Plug and
Play in the BIOS (if possible) and then XP should sort out the IRQ sharing
by itself. You may need to do a Repair Installation to get it correct.

See:
A General Description of IRQ Sharing in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;314068

How to Perform an In-Place Upgrade (Reinstallation) of Windows XP
http://support.microsoft.com/default.aspx?scid=kb;[LN];315341

Cari
www.coribright.com

"Marlie Phillips" > wrote in message
...
> > I can't get it to recognize any USB device, how do I correct these
> problems
> > in the device manager? They all three have yellow exclamation points
> saying
> > not enough free resources available. I've tried disabling things I
don't
> > use and that still doesn't work. Any suggestions?
> >
> > Thanks.
> > Marlie Phillips
> >
> >
>
>
> > Problem Devices:
> > NEC PCI to USB Enhanced Host Controller (B0)
> > PCI\VEN_1033&DEV_00E0&SUBSYS_00E01033&REV_01\3&2C30BBFF&0&0AF0 This
device
> > cannot find enough free resources that it can use.
> > NEC PCI to USB Open Host Controller
> > PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&08F0 This
device
> > cannot find enough free resources that it can use.
> > NEC PCI to USB Open Host Controller
> > PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&09F0 This
device
> > cannot find enough free resources that it can use.
> >
> > OS: WinXP Pro 5.1.2600 SP1 Build 2600 w/most all critical updates
> installed.
> > System Type: X86-based PC
> > Processor: X86 Family 15 Model 0 Stepping 7 Genuine Intel 1496Mhz
> > BIOS Version/Date: Intel Corp. GB85010A, 86A.0078.P18.0110081719,
> 10/8/2001
> > SMBIOS Version: 2.3
> > Hardware Abstraction Layer Version = 5.1.2600.1106 (xpsp1.020828-1920)
> > Total Physical Memory: 128Mb RIMM RAM
>
> > Conflicts/Sharing:
> >
> > I/O Port 0x00000072-0x0000007F PCI bus
> > I/O Port 0x00000072-0x0000007F Motherboard resources
> >
> > Memory Address 0x0001-0x0000 Motherboard resources
> > Memory Address 0x0001-0x0000 Motherboard resources
> > Memory Address 0x0001-0x0000 Motherboard resources
> > Memory Address 0x0001-0x0000 Motherboard resources
> > Memory Address 0x0001-0x0000 Motherboard resources
> > Memory Address 0x0001-0x0000 Motherboard resources
> > Memory Address 0x0001-0x0000 Motherboard resources
> > Memory Address 0x0001-0x0000 Motherboard resources
> >
> > I/O Port 0x000003C0-0x000003DF Intel Processor to AGP Controller
> > I/O Port 0x000003C0-0x000003DF 3D Prophet 4000XT
> >
> > IRQ 10 3Com 3C905TX-based Ethernet Adapter (Generic)
> > IRQ 10 Intel(R) 82801BA/BAM SMBus Controller - 2443
> >
> > I/O Port 0x000000A2-0x000000BF PCI bus
> > I/O Port 0x000000A2-0x000000BF Motherboard resources
> >
> > Memory Address 0xA0000-0xBFFFF Intel Processor to AGP Controller
> > Memory Address 0xA0000-0xBFFFF 3D Prophet 4000XT
> >
> > I/O Port 0x000003B0-0x000003BB Intel Processor to AGP Controller
> > I/O Port 0x000003B0-0x000003BB 3D Prophet 4000XT
> >
> > I/O Port 0x00000022-0x0000003F PCI bus
> > I/O Port 0x00000022-0x0000003F Motherboard resources
> >
> > Components
> > USB:
> > Intel(r) 82801BA/BAM USB Universal Host Controller - 2442
> > PCI\VEN_8086&DEV_2442&SUBSYS_47428086&REV_02\2&EBB567F&0&FA
> > Intel(r) 82801BA/BAM USB Universal Host Controller - 2444
> > PCI\VEN_8086&DEV_2444&SUBSYS_47428086&REV_02\2&EBB567F&0&FC
> > NEC PCI to USB Enhanced Host Controller (B0)
> > PCI\VEN_1033&DEV_00E0&SUBSYS_00E01033&REV_01\3&2C30BBFF&0&0AF0
> > NEC PCI to USB Open Host Controller
> > PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&08F0
> > NEC PCI to USB Open Host Controller
> > PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&09F0
> > USB Root Hub USB\ROOT_HUB\3&10D553B0&0
> > USB Root Hub USB\ROOT_HUB\3&1C227314&0
> >
> > IRQ's
> > IRQ 0 System timer OK
> > IRQ 1 PC/AT Enhanced PS/2 Keyboard (101/102-Key) OK
> > IRQ 3 YAMAHA Native DS1 WDM Driver OK
> > IRQ 4 Communications Port (COM1) OK
> > IRQ 5 Intel(r) 82801BA/BAM USB Universal Host Controller - 2442 OK
> > IRQ 6 Standard floppy disk controller OK
> > IRQ 7 Printer Port (LPT1) OK
> > IRQ 8 System CMOS/real time clock OK
> > IRQ 9 Intel(r) 82801BA/BAM USB Universal Host Controller - 2444 OK
> > IRQ 10 3Com 3C905TX-based Ethernet Adapter (Generic) OK
> > IRQ 10 Intel(R) 82801BA/BAM SMBus Controller - 2443 OK
> > IRQ 11 3D Prophet 4000XT OK
> > IRQ 12 Microsoft PS/2 Mouse OK
> > IRQ 13 Numeric data processor OK
> > IRQ 14 Primary IDE Channel OK
> > IRQ 15 Secondary IDE Channel OK
> >
> >
>
>

[Marlie Phillips]

Hi Cari,

Thanks for the help, much appreciated; however, everything looks fine in
BIOS and PnP is disabled... I have reinstalled Windows XP twice since I have
gotten it (Dec 02) and still no luck.

Current BIOS settings:
ACPI Suspend State = S1 (Safest but consumes more pwr)
The only other option is S3 (Lower pwr but drivers may not support this
state)
wake on LAN from S5 = Stay Off
Wake on LAN = Stay Off
Wake on PME = Stay Off
Wake on Modem Ring = Stay Off
After Pwr Failure = Stay Off
PnP O/S = No

I have tried reloading BIOS, removing/disabling hardware in device mgr +
rebooting, no luck. I'm not sure what else I can try... If I got a PCI
4-slot USB card, will this bypass the problem, or would I be unable to use
as well? (2.0) I was looking at this at a local store but I didn't see a
driver disk included ($29.95) - When I check my event viewer, I only have
two errors I see frequently (pasted below) but I don't think they have
anything to do with this problem.

Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10010
Date: 4/26/2003
Time: 1:50:48 PM
User: MIXMASTER\Administrator
Computer: MIXMASTER
Description:
The server {520CCA63-51A5-11D3-9144-00104BA11C5E} did not register with DCOM
within the required timeout.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

================================================== =======
Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 4/19/2003
Time: 8:45:46 PM
User: N/A
Computer: MIXMASTER
Description:
Error code 0000000a, parameter1 002d0044, parameter2 00000002, parameter3
00000000, parameter4 805251ac.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 30 0000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 32 64 30 30 34 34 2c 20 2d0044,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 38 30 35 32 00, 8052
0050: 35 31 61 63 51ac



Thanks for your prompt response and all you're help and info.

=)

Marlie


"Cari (MS-MVP)" > wrote in message
...
> Ensure ACPI is set correctly in the BIOS and then try disabling Plug and
> Play in the BIOS (if possible) and then XP should sort out the IRQ sharing
> by itself. You may need to do a Repair Installation to get it correct.
>
> See:
> A General Description of IRQ Sharing in Windows XP
> http://support.microsoft.com/default.aspx?scid=kb;en-us;314068
>
> How to Perform an In-Place Upgrade (Reinstallation) of Windows XP
> http://support.microsoft.com/default.aspx?scid=kb;[LN];315341
>
> Cari
> www.coribright.com
>
> "Marlie Phillips" > wrote in message
> ...
> > > I can't get it to recognize any USB device, how do I correct these
> > problems
> > > in the device manager? They all three have yellow exclamation points
> > saying
> > > not enough free resources available. I've tried disabling things I
> don't
> > > use and that still doesn't work. Any suggestions?
> > >
> > > Thanks.
> > > Marlie Phillips
> > >
> > >
> >
> >
> > > Problem Devices:
> > > NEC PCI to USB Enhanced Host Controller (B0)
> > > PCI\VEN_1033&DEV_00E0&SUBSYS_00E01033&REV_01\3&2C30BBFF&0&0AF0 This
> device
> > > cannot find enough free resources that it can use.
> > > NEC PCI to USB Open Host Controller
> > > PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&08F0 This
> device
> > > cannot find enough free resources that it can use.
> > > NEC PCI to USB Open Host Controller
> > > PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&09F0 This
> device
> > > cannot find enough free resources that it can use.
> > >
> > > OS: WinXP Pro 5.1.2600 SP1 Build 2600 w/most all critical updates
> > installed.
> > > System Type: X86-based PC
> > > Processor: X86 Family 15 Model 0 Stepping 7 Genuine Intel 1496Mhz
> > > BIOS Version/Date: Intel Corp. GB85010A, 86A.0078.P18.0110081719,
> > 10/8/2001
> > > SMBIOS Version: 2.3
> > > Hardware Abstraction Layer Version = 5.1.2600.1106 (xpsp1.020828-1920)
> > > Total Physical Memory: 128Mb RIMM RAM
> >
> > > Conflicts/Sharing:
> > >
> > > I/O Port 0x00000072-0x0000007F PCI bus
> > > I/O Port 0x00000072-0x0000007F Motherboard resources
> > >
> > > Memory Address 0x0001-0x0000 Motherboard resources
> > > Memory Address 0x0001-0x0000 Motherboard resources
> > > Memory Address 0x0001-0x0000 Motherboard resources
> > > Memory Address 0x0001-0x0000 Motherboard resources
> > > Memory Address 0x0001-0x0000 Motherboard resources
> > > Memory Address 0x0001-0x0000 Motherboard resources
> > > Memory Address 0x0001-0x0000 Motherboard resources
> > > Memory Address 0x0001-0x0000 Motherboard resources
> > >
> > > I/O Port 0x000003C0-0x000003DF Intel Processor to AGP Controller
> > > I/O Port 0x000003C0-0x000003DF 3D Prophet 4000XT
> > >
> > > IRQ 10 3Com 3C905TX-based Ethernet Adapter (Generic)
> > > IRQ 10 Intel(R) 82801BA/BAM SMBus Controller - 2443
> > >
> > > I/O Port 0x000000A2-0x000000BF PCI bus
> > > I/O Port 0x000000A2-0x000000BF Motherboard resources
> > >
> > > Memory Address 0xA0000-0xBFFFF Intel Processor to AGP Controller
> > > Memory Address 0xA0000-0xBFFFF 3D Prophet 4000XT
> > >
> > > I/O Port 0x000003B0-0x000003BB Intel Processor to AGP Controller
> > > I/O Port 0x000003B0-0x000003BB 3D Prophet 4000XT
> > >
> > > I/O Port 0x00000022-0x0000003F PCI bus
> > > I/O Port 0x00000022-0x0000003F Motherboard resources
> > >
> > > Components
> > > USB:
> > > Intel(r) 82801BA/BAM USB Universal Host Controller - 2442
> > > PCI\VEN_8086&DEV_2442&SUBSYS_47428086&REV_02\2&EBB567F&0&FA
> > > Intel(r) 82801BA/BAM USB Universal Host Controller - 2444
> > > PCI\VEN_8086&DEV_2444&SUBSYS_47428086&REV_02\2&EBB567F&0&FC
> > > NEC PCI to USB Enhanced Host Controller (B0)
> > > PCI\VEN_1033&DEV_00E0&SUBSYS_00E01033&REV_01\3&2C30BBFF&0&0AF0
> > > NEC PCI to USB Open Host Controller
> > > PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&08F0
> > > NEC PCI to USB Open Host Controller
> > > PCI\VEN_1033&DEV_0035&SUBSYS_00351033&REV_41\3&2C30BBFF&0&09F0
> > > USB Root Hub USB\ROOT_HUB\3&10D553B0&0
> > > USB Root Hub USB\ROOT_HUB\3&1C227314&0
> > >
> > > IRQ's
> > > IRQ 0 System timer OK
> > > IRQ 1 PC/AT Enhanced PS/2 Keyboard (101/102-Key) OK
> > > IRQ 3 YAMAHA Native DS1 WDM Driver OK
> > > IRQ 4 Communications Port (COM1) OK
> > > IRQ 5 Intel(r) 82801BA/BAM USB Universal Host Controller - 2442 OK
> > > IRQ 6 Standard floppy disk controller OK
> > > IRQ 7 Printer Port (LPT1) OK
> > > IRQ 8 System CMOS/real time clock OK
> > > IRQ 9 Intel(r) 82801BA/BAM USB Universal Host Controller - 2444 OK
> > > IRQ 10 3Com 3C905TX-based Ethernet Adapter (Generic) OK
> > > IRQ 10 Intel(R) 82801BA/BAM SMBus Controller - 2443 OK
> > > IRQ 11 3D Prophet 4000XT OK
> > > IRQ 12 Microsoft PS/2 Mouse OK
> > > IRQ 13 Numeric data processor OK
> > > IRQ 14 Primary IDE Channel OK
> > > IRQ 15 Secondary IDE Channel OK
> > >
> > >
> >
> >
>
>