USB 2.0 & USB 1.1 components

[Vic]

Anyone have any idea of how to make USB 1.1 components
work with XP and sp1 updates when using a USB 2.0 pci
card , have followed microsofts advice about scanning for
hardware changes , but as usual with microsoft advice it
doesn't work , any of you bright people have the answer
please , Thanks .. Vic

[Wayne W.]

Sounds like you got stuck with USB card that is not backwards =
compatible. But it could be that the drivers for it weren't installed. =20


"Vic" > wrote in message =
...
> Anyone have any idea of how to make USB 1.1 components=20
> work with XP and sp1 updates when using a USB 2.0 pci=20
> card , have followed microsofts advice about scanning for=20
> hardware changes , but as usual with microsoft advice it=20
> doesn't work , any of you bright people have the answer=20
> please , Thanks .. Vic

[vic]

yep its backwards compatable and the drivers are
installed , can use the USB 1.1 equipment but only by
using it as a 1.1 card , microsoft know of this problem ,
was wondering if anyone knew a way round it
>-----Original Message-----
>Sounds like you got stuck with USB card that is not
backwards compatible. But it could be that the drivers
for it weren't installed.
>
>
>"Vic" > wrote in message
...
>> Anyone have any idea of how to make USB 1.1 components
>> work with XP and sp1 updates when using a USB 2.0 pci
>> card , have followed microsofts advice about scanning
for
>> hardware changes , but as usual with microsoft advice
it
>> doesn't work , any of you bright people have the
answer
>> please , Thanks .. Vic
>.
>

[Pete Baker]

Vic

You need USB 2.0 compliant hardware at both ends of the cable to make that
work. If the Hardware you're plugging into a USB2 port on your system is
only USB1.1 compliant that's all you'll get.

The 'way round it' is to buy new USB2 compliant hardware.

Pete
---------------------------
"vic" > wrote in message
...
> yep its backwards compatable and the drivers are
> installed , can use the USB 1.1 equipment but only by
> using it as a 1.1 card , microsoft know of this problem ,
> was wondering if anyone knew a way round it
> >-----Original Message-----
> >Sounds like you got stuck with USB card that is not
> backwards compatible. But it could be that the drivers
> for it weren't installed.
> >
> >
> >"Vic" > wrote in message
> ...
> >> Anyone have any idea of how to make USB 1.1 components
> >> work with XP and sp1 updates when using a USB 2.0 pci
> >> card , have followed microsofts advice about scanning
> for
> >> hardware changes , but as usual with microsoft advice
> it
> >> doesn't work , any of you bright people have the
> answer
> >> please , Thanks .. Vic
> >.
> >

[vic]

Thanks pete
>-----Original Message-----
>Vic
>
>You need USB 2.0 compliant hardware at both ends of the
cable to make that
>work. If the Hardware you're plugging into a USB2 port
on your system is
>only USB1.1 compliant that's all you'll get.
>
>The 'way round it' is to buy new USB2 compliant hardware.
>
>Pete
>---------------------------
>"vic" > wrote in message
...
>> yep its backwards compatable and the drivers are
>> installed , can use the USB 1.1 equipment but only by
>> using it as a 1.1 card , microsoft know of this
problem ,
>> was wondering if anyone knew a way round it
>> >-----Original Message-----
>> >Sounds like you got stuck with USB card that is not
>> backwards compatible. But it could be that the drivers
>> for it weren't installed.
>> >
>> >
>> >"Vic" > wrote in message
>> ...
>> >> Anyone have any idea of how to make USB 1.1
components
>> >> work with XP and sp1 updates when using a USB 2.0
pci
>> >> card , have followed microsofts advice about
scanning
>> for
>> >> hardware changes , but as usual with microsoft
advice
>> it
>> >> doesn't work , any of you bright people have the
>> answer
>> >> please , Thanks .. Vic
>> >.
>> >
>
>
>.
>