PDA

View Full Version : DVD-ROM/CD-R/RW err Code 41


3
December 6th 03, 10:29 PM
Both of my cdrom drives have that same error:

Windows successfully loaded the device driver for this
hardware but cannot find the hardware device. (Code 41)

they were working properly ( i burned a cd the day before)
next day, when i turned on my computer i had that error
on both drives. I hadn't made any kind of hardware or
system changes. Afterwards I uninstalled both of them,
then disconnected them and rebooted. Everything was ok i
just had no cdrom drives. I reconnected and turned back
on and still same error. cable swapped and no change.
HELP ME!!!

Jason Tsang
December 6th 03, 10:29 PM
See if this helps

Goto http://www.aumha.org/a/xpcd.php#problems
See the second "problem" (read the caveats)
Run the provided registry patch

That should fix your problem (basically, a filter driver is missing or
non-operational, the registry patch will delete the filter drivers
references for your cdrom(s))


Basically, the reg file from above carries out the steps displayed at this
website

CD-ROM Access Is Missing and Messages Cite Error Code 31, Code 32, Code 19,
or Code 39 After You Remove Easy CD Creator in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;[LN];q314060


--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"3" > wrote in message
...
> Both of my cdrom drives have that same error:
>
> Windows successfully loaded the device driver for this
> hardware but cannot find the hardware device. (Code 41)
>
> they were working properly ( i burned a cd the day before)
> next day, when i turned on my computer i had that error
> on both drives. I hadn't made any kind of hardware or
> system changes. Afterwards I uninstalled both of them,
> then disconnected them and rebooted. Everything was ok i
> just had no cdrom drives. I reconnected and turned back
> on and still same error. cable swapped and no change.
> HELP ME!!!

Google