PDA

View Full Version : STOP : c000021a Installing XP


Duncan Cook
December 7th 03, 09:42 AM
Bought a new motherboard (Gigabyte GA-7VAX-A) when i
swapped over XP detected all the devices on new board an
worked fine. Decided just for the sake of a clean
environment i'd re-install XP pro.

Files copy over at the initial Blue Screen stage of
install no probs. Then after the 1st reboot i get :

STOP : c000021a {FATAL SYSTEM ERROR}
The session manager initialization system process
terminated unexpectedly with a status of 0xc000026c
(0x00000000 0x00000000)
The system has been shut down.

just after the windows logo stage of boot

can't even get in to ask a pro cos i cant get my PID from
XP-Pro cos i cant get it installed.

Anyone run into this or similar? Obv i have switched
everything off in BIOS, taken everything out of pci slots
and tried 3 gfx cards.

Alvin A Brown
December 7th 03, 09:42 AM
Hello

You need to do the following below
http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q315341&ID=KB;EN-US;Q315341






Duncan Cook wrote:

> Bought a new motherboard (Gigabyte GA-7VAX-A) when i
> swapped over XP detected all the devices on new board an
> worked fine. Decided just for the sake of a clean
> environment i'd re-install XP pro.
>
> Files copy over at the initial Blue Screen stage of
> install no probs. Then after the 1st reboot i get :
>
> STOP : c000021a {FATAL SYSTEM ERROR}
> The session manager initialization system process
> terminated unexpectedly with a status of 0xc000026c
> (0x00000000 0x00000000)
> The system has been shut down.
>
> just after the windows logo stage of boot
>
> can't even get in to ask a pro cos i cant get my PID from
> XP-Pro cos i cant get it installed.
>
> Anyone run into this or similar? Obv i have switched
> everything off in BIOS, taken everything out of pci slots
> and tried 3 gfx cards.

Duncan
December 7th 03, 09:42 AM
do what?? all that's there is a guide on how to install
XP, somethign with i've only done about 1000 times in the
past.....


>-----Original Message-----
>Hello
>
>You need to do the following below
>http://support.microsoft.com/default.aspx?scid=KB;EN-
US;Q315341&ID=KB;EN-US;Q315341
>
>
>
>
>
>
>Duncan Cook wrote:
>
>> Bought a new motherboard (Gigabyte GA-7VAX-A) when i
>> swapped over XP detected all the devices on new board an
>> worked fine. Decided just for the sake of a clean
>> environment i'd re-install XP pro.
>>
>> Files copy over at the initial Blue Screen stage of
>> install no probs. Then after the 1st reboot i get :
>>
>> STOP : c000021a {FATAL SYSTEM ERROR}
>> The session manager initialization system process
>> terminated unexpectedly with a status of 0xc000026c
>> (0x00000000 0x00000000)
>> The system has been shut down.
>>
>> just after the windows logo stage of boot
>>
>> can't even get in to ask a pro cos i cant get my PID
from
>> XP-Pro cos i cant get it installed.
>>
>> Anyone run into this or similar? Obv i have switched
>> everything off in BIOS, taken everything out of pci
slots
>> and tried 3 gfx cards.
>
>.
>

Duncan
December 7th 03, 09:42 AM
perhaps i should've said that i'm re-installing onto my
nicely re-formatted system partition (re-formatted by XP
install and by partition progs off a dos boot) and i
certainly am no novice.

Google