Jumpers

[E]

>-----Original Message-----
>Recheck the jumper settings on your hard drives.
>On my Maxtor slave drive, there is no jumper that
>needs to be installed.
>
>See:
http://service.maxtor.com/rightnow/images/maxtor_quantum%
20jumpers.htm
>
> --
>Nicholas
>
>.
>I have disk 1 (the problem drive) jumpered as slave which
as the drive diagram shows. Should I remove this jumper
even though it shows it on the diagram. They are both on
the same cable and it is the last drive on that cable
using the last termination on that particular cable.

[Nicholas]

Your primary Master drive should have a jumper installed
as Master per Style A1 (first diagram). Your secondary drive (slave) =
should
not have any jumpers installed.

--=20
Nicholas

--------------------------------------------------------------

"E" > wrote in message:
...

| >I have disk 1 (the problem drive) jumpered as slave which=20
| as the drive diagram shows. Should I remove this jumper=20
| even though it shows it on the diagram. They are both on=20
| the same cable and it is the last drive on that cable=20
| using the last termination on that particular cable.