XP suddenly stops burning [Archive]

View Full Version : XP suddenly stops burning

December 8th 03, 06:11 AM

Hello there!

I have been succesfully using Windows Media Player to
burn CDs on my PC....until a couple of weeks ago. Windows
Media Player now doesn't burn, niether does Easy CD
Creator. I installed Nero Express yesterday and that did
not work either. However, the Nero Burn gave me a log
file showing all the processes. Unfortunately, I am not a
techy and cannot read behind all the tech-talk. Below is
the first part of the log (showing all the system info)
and the last part of the log (showing the errors).

Would appreciate any help.

.........................

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program
Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016
bytes, created 1/29/2003 10:37:36 PM
Nero Version: 5.5.10.42 (Nero Express)
Recorder: <SAMSUNG CD-R/RW SW-224B> Version:
R200 - HA 1 TA 0 - 5.5.10.42
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected:
ATAPI
CD-ROM: <SAMSUNG CD-R/RW SW-224B>Version:
R200 - HA 1 TA 0 - 5.5.10.42
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected:
ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP4002H
atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-224B
atapi Port 1 ID 0 DMA: Off
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 254MB (260728kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

.................................................. ...

2:28:04 PM #30 Text 0 File WriterStatus.cpp, Line 115
<SAMSUNG CD-R/RW SW-224B > start writing Lead-Out at
LBA 336905 (52409h), lenght 0 blocks

2:34:05 PM #31 SCSI -1169 File Cdrdrv.cpp, Line 1239
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x07

2:35:08 PM #32 MMC -1169 File Writer.cpp, Line 333
Logical unit not ready, operation in progress

2:35:08 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

2:35:09 PM #34 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 24x (3,600 KB/s)

2:35:09 PM #35 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436
bytes, created 7/23/2003 10:19:18 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-
1148), size=86656 bytes, created 8/18/2001 12:00:00 PM
(Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows
NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security
Option)

Paul

December 8th 03, 06:11 AM

I can't say why this is but try to burn at a slower speed and see what
happens. If it works at a slower speed, then you know it's most likely your
burner and not the software.
Sorry I can't offer more.

"SB" > wrote in message
...
> Hello there!
>
> I have been succesfully using Windows Media Player to
> burn CDs on my PC....until a couple of weeks ago. Windows
> Media Player now doesn't burn, niether does Easy CD
> Creator. I installed Nero Express yesterday and that did
> not work either. However, the Nero Burn gave me a log
> file showing all the processes. Unfortunately, I am not a
> techy and cannot read behind all the tech-talk. Below is
> the first part of the log (showing all the system info)
> and the last part of the log (showing the errors).
>
> Would appreciate any help.
>
> ........................
>
> Windows XP 5.1
> IA32
> WinAspi: -
> ahead WinASPI: File 'C:\Program
> Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016
> bytes, created 1/29/2003 10:37:36 PM
> Nero Version: 5.5.10.42 (Nero Express)
> Recorder: <SAMSUNG CD-R/RW SW-224B> Version:
> R200 - HA 1 TA 0 - 5.5.10.42
> Adapter driver: <atapi> HA 1
> Drive buffer : 2048kB
> Bus Type : default (0) -> ATAPI, detected:
> ATAPI
> CD-ROM: <SAMSUNG CD-R/RW SW-224B>Version:
> R200 - HA 1 TA 0 - 5.5.10.42
> Adapter driver: <atapi> HA 1
> Bus Type : default (0) -> ATAPI, detected:
> ATAPI
>
> === Scsi-Device-Map ===
> DiskPeripheral : SAMSUNG SP4002H
> atapi Port 0 ID 0 DMA: On
> CdRomPeripheral : SAMSUNG CD-R/RW SW-224B
> atapi Port 1 ID 0 DMA: Off
> =======================
>
> AutoRun : 1
> Excluded drive IDs:
> CmdQueuing : 1
> CmdNotification: 2
> WriteBufferSize: 74448896 (0) Byte
> ShowDrvBufStat : 0
> EraseSpeed : 0
> BUFE : 0
> Physical memory : 511MB (523568kB)
> Free physical memory: 254MB (260728kB)
> Memory in use : 50 %
> Uncached PFiles: 0x0
> Use Static Write Speed Table: 0
> Use Inquiry : 1
> Global Bus Type: default (0)
> Check supported media : Enabled (1)
> Wizard: Off
>
> .................................................. ..
>
>
> 2:28:04 PM #30 Text 0 File WriterStatus.cpp, Line 115
> <SAMSUNG CD-R/RW SW-224B > start writing Lead-Out at
> LBA 336905 (52409h), lenght 0 blocks
>
> 2:34:05 PM #31 SCSI -1169 File Cdrdrv.cpp, Line 1239
> SCSI Exec, HA 1, TA 0, LUN 0
> Status: 0x04 (0x01, SCSI_ERR)
> HA-Status 0x00 (0x00, OK)
> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
> Sense Key: 0x02 (KEY_NOT_READY)
> Sense Code: 0x04
> Sense Qual: 0x07
> CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> 0x00 0x00 0x00
> Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
> 0x00 0x00 0x00 0x00 0x04 0x07
>
> 2:35:08 PM #32 MMC -1169 File Writer.cpp, Line 333
> Logical unit not ready, operation in progress
>
> 2:35:08 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222
> all writers idle, stopping conversion
>
> 2:35:09 PM #34 Phase 38 File dlgbrnst.cpp, Line 1655
> Burn process failed at 24x (3,600 KB/s)
>
> 2:35:09 PM #35 Text 0 File Scsicmd.cpp, Line 406
> SCSI not using temporary buffers
> 20 out of 20 temporary buffers allocated
>
>
> Existing drivers:
> File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436
> bytes, created 7/23/2003 10:19:18 AM
> File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-
> 1148), size=86656 bytes, created 8/18/2001 12:00:00 PM
> (Adapter driver for rec)
>
> Registry Keys:
> HKLM\Software\Microsoft\Windows
> NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security
> Option)
>

December 8th 03, 06:13 AM

Paul, thanx. it worked @ 20X.

>-----Original Message-----
>I can't say why this is but try to burn at a slower
speed and see what
>happens. If it works at a slower speed, then you know
it's most likely your
>burner and not the software.
>Sorry I can't offer more.
>
>"SB" > wrote in message
...
>> Hello there!
>>
>> I have been succesfully using Windows Media Player to
>> burn CDs on my PC....until a couple of weeks ago.
Windows
>> Media Player now doesn't burn, niether does Easy CD
>> Creator. I installed Nero Express yesterday and that
did
>> not work either. However, the Nero Burn gave me a log
>> file showing all the processes. Unfortunately, I am
not a
>> techy and cannot read behind all the tech-talk. Below
is
>> the first part of the log (showing all the system info)
>> and the last part of the log (showing the errors).
>>
>> Would appreciate any help.
>>
>> ........................
>>
>> Windows XP 5.1
>> IA32
>> WinAspi: -
>> ahead WinASPI: File 'C:\Program
>> Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59,
size=160016
>> bytes, created 1/29/2003 10:37:36 PM
>> Nero Version: 5.5.10.42 (Nero Express)
>> Recorder: <SAMSUNG CD-R/RW SW-224B>
Version:
>> R200 - HA 1 TA 0 - 5.5.10.42
>> Adapter driver: <atapi> HA 1
>> Drive buffer : 2048kB
>> Bus Type : default (0) -> ATAPI, detected:
>> ATAPI
>> CD-ROM: <SAMSUNG CD-R/RW SW-
224B>Version:
>> R200 - HA 1 TA 0 - 5.5.10.42
>> Adapter driver: <atapi> HA 1
>> Bus Type : default (0) -> ATAPI, detected:
>> ATAPI
>>
>> === Scsi-Device-Map ===
>> DiskPeripheral : SAMSUNG SP4002H
>> atapi Port 0 ID 0 DMA: On
>> CdRomPeripheral : SAMSUNG CD-R/RW SW-224B
>> atapi Port 1 ID 0 DMA: Off
>> =======================
>>
>> AutoRun : 1
>> Excluded drive IDs:
>> CmdQueuing : 1
>> CmdNotification: 2
>> WriteBufferSize: 74448896 (0) Byte
>> ShowDrvBufStat : 0
>> EraseSpeed : 0
>> BUFE : 0
>> Physical memory : 511MB (523568kB)
>> Free physical memory: 254MB (260728kB)
>> Memory in use : 50 %
>> Uncached PFiles: 0x0
>> Use Static Write Speed Table: 0
>> Use Inquiry : 1
>> Global Bus Type: default (0)
>> Check supported media : Enabled (1)
>> Wizard: Off
>>
>> .................................................. ..
>>
>>
>> 2:28:04 PM #30 Text 0 File WriterStatus.cpp, Line 115
>> <SAMSUNG CD-R/RW SW-224B > start writing Lead-Out at
>> LBA 336905 (52409h), lenght 0 blocks
>>
>> 2:34:05 PM #31 SCSI -1169 File Cdrdrv.cpp, Line 1239
>> SCSI Exec, HA 1, TA 0, LUN 0
>> Status: 0x04 (0x01, SCSI_ERR)
>> HA-Status 0x00 (0x00, OK)
>> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> Sense Key: 0x02 (KEY_NOT_READY)
>> Sense Code: 0x04
>> Sense Qual: 0x07
>> CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00
>> 0x00 0x00 0x00
>> Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
>> 0x00 0x00 0x00 0x00 0x04 0x07
>>
>> 2:35:08 PM #32 MMC -1169 File Writer.cpp, Line 333
>> Logical unit not ready, operation in progress
>>
>> 2:35:08 PM #33 Text 0 File ThreadedTransfer.cpp, Line
222
>> all writers idle, stopping conversion
>>
>> 2:35:09 PM #34 Phase 38 File dlgbrnst.cpp, Line 1655
>> Burn process failed at 24x (3,600 KB/s)
>>
>> 2:35:09 PM #35 Text 0 File Scsicmd.cpp, Line 406
>> SCSI not using temporary buffers
>> 20 out of 20 temporary buffers allocated
>>
>>
>> Existing drivers:
>> File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436
>> bytes, created 7/23/2003 10:19:18 AM
>> File 'Drivers\atapi.sys': Ver=5.1.2600.0
(XPClient.010817-
>> 1148), size=86656 bytes, created 8/18/2001 12:00:00 PM
>> (Adapter driver for rec)
>>
>> Registry Keys:
>> HKLM\Software\Microsoft\Windows
>> NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security
>> Option)
>>
>
>
>.
>