Andrew E
December 8th 03, 06:20 AM
On start-up tap the F8 key,select start windows normal.
You might also go to the BIOS,exit page,select,load set-
up defaults,save changes and exit BIOS.
>-----Original Message-----
>Ok this is my problem I have just received a new case,
>processor, and motherboard to which I have transfered my
>hard drives and cd roms from my older system. Upon
>initial boot up I received a screen with "NTLDR missing",
>I had tryed fixboot, fixmbr and repairing the
>installation from the WinXp cd. Now when my system boots
>up it boots into a winxp setup but I really don't want
>this because I will loose important information from e-
>mail and passwords. Is there a way that I can del that
>install file within DOS?
>
>.
>
You might also go to the BIOS,exit page,select,load set-
up defaults,save changes and exit BIOS.
>-----Original Message-----
>Ok this is my problem I have just received a new case,
>processor, and motherboard to which I have transfered my
>hard drives and cd roms from my older system. Upon
>initial boot up I received a screen with "NTLDR missing",
>I had tryed fixboot, fixmbr and repairing the
>installation from the WinXp cd. Now when my system boots
>up it boots into a winxp setup but I really don't want
>this because I will loose important information from e-
>mail and passwords. Is there a way that I can del that
>install file within DOS?
>
>.
>