PDA

View Full Version : Hardware/Software Problem


flycat
December 8th 03, 06:26 AM
I got a new case, CPU, and MB just like you did and I
can't get my old hard drive to load windows. I am getting
some
multi(0)disk(0)rdisk(0)partition(1)
multi(0)disk(0)rdisk(0)partition(1)
multi(0)disk(0)rdisk(0)partition(1)
multi(0)disk(0)rdisk(0)partition(1)

after the (1) it has file names, there are about 20 of
those messages or so then the computer just stops with me
still there to face the multi(0)disk(0)rdisk(0)partition
(1) filled screen. I've been trying to use the recovery
console from XP start up disc's but no luck. ANyway I was
wondering if anyone figure out how to fix this problem and
if so, please let me know.

flycat

>-----Original Message-----
>Ok this is my problem I have just received a new case,
>processor, and motherboard to which I have transfered my
>hard drives and cd roms from my older system. Upon
>initial boot up I received a screen with "NTLDR missing",
>I had tryed fixboot, fixmbr and repairing the
>installation from the WinXp cd. Now when my system boots
>up it boots into a winxp setup but I really don't want
>this because I will loose important information from e-
>mail and passwords. Is there a way that I can del that
>install file within DOS?
>
>.
>

Alvin A Brown
December 8th 03, 06:26 AM
Hello

Did you perform the following before had

Do a repair install
http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q315341&ID=KB;EN-US;Q315341





Alvin


flycat wrote:

> I got a new case, CPU, and MB just like you did and I
> can't get my old hard drive to load windows. I am getting
> some
> multi(0)disk(0)rdisk(0)partition(1)
> multi(0)disk(0)rdisk(0)partition(1)
> multi(0)disk(0)rdisk(0)partition(1)
> multi(0)disk(0)rdisk(0)partition(1)
>
> after the (1) it has file names, there are about 20 of
> those messages or so then the computer just stops with me
> still there to face the multi(0)disk(0)rdisk(0)partition
> (1) filled screen. I've been trying to use the recovery
> console from XP start up disc's but no luck. ANyway I was
> wondering if anyone figure out how to fix this problem and
> if so, please let me know.
>
> flycat
>
> >-----Original Message-----
> >Ok this is my problem I have just received a new case,
> >processor, and motherboard to which I have transfered my
> >hard drives and cd roms from my older system. Upon
> >initial boot up I received a screen with "NTLDR missing",
> >I had tryed fixboot, fixmbr and repairing the
> >installation from the WinXp cd. Now when my system boots
> >up it boots into a winxp setup but I really don't want
> >this because I will loose important information from e-
> >mail and passwords. Is there a way that I can del that
> >install file within DOS?
> >
> >.
> >

Google