martin franche
December 5th 03, 01:21 AM
are you using a cross over cable or a hub?
if you use a hub then the IP address needs to be set for
the network..something like 10.0.0.1 and 10.0.0.2
make sure that if they are directly connected that the
cable is a cross over and not straight through..
>-----Original Message-----
>Setting up a network.
>
>I have a 3com HomeConnect
>
>One machine is XP, the other 98SE.
>
>BOTH machines find their own card. NEITHER machine can
find the other.
>
>ALL indications are that everything is set up properly,
but there is NO
>network.
>
>Any help will be truly appreciated.
>
>Thanks
>JH
>
>
>.
>
if you use a hub then the IP address needs to be set for
the network..something like 10.0.0.1 and 10.0.0.2
make sure that if they are directly connected that the
cable is a cross over and not straight through..
>-----Original Message-----
>Setting up a network.
>
>I have a 3com HomeConnect
>
>One machine is XP, the other 98SE.
>
>BOTH machines find their own card. NEITHER machine can
find the other.
>
>ALL indications are that everything is set up properly,
but there is NO
>network.
>
>Any help will be truly appreciated.
>
>Thanks
>JH
>
>
>.
>