need jumpers for Asus A7pro motherboard

[Valdivar]

Asus' site doesn't have a jumper page -yet.Just my luck.

Does anybody have the jumpers for this M.B.....mostly for the case wires:
spkr,reset,pwr sw. etc.

they are marked,but not very clearly and I can't tell which is voltage and
which is ground.


On top of that,the only thing I get when I turn the pwr on is a green LED in
the middle of the motherboard.Can't even here the pwr supply or nothing.


My brother-in-law gave it to me.When I got it somebody had bent the pins on
the Duron 800 cpu,so I sttraightened out-carefully.I'm wondering if the
cpu's shot,or maybe the M.B. also,or maybe(with any luck) I just don't have
the pwr sw. wires on the right pins?

tnx in advance

[Clay]

You can check to see if this helps.
Clay


http://www.google.com/search?q=+Asus+A7pro+motherboard+manual&hl=en&lr=&ie=UTF-8&oe=UTF-8&start=10&sa=N

http://www.asus.com/pub/asus/mb/socka/kt133/a7pro/a7pro-104.pdf



"Valdivar" > wrote in message
.. .
> Asus' site doesn't have a jumper page -yet.Just my luck.
>
> Does anybody have the jumpers for this M.B.....mostly for the case wires:
> spkr,reset,pwr sw. etc.
>
> they are marked,but not very clearly and I can't tell which is voltage and
> which is ground.
>
>
> On top of that,the only thing I get when I turn the pwr on is a green LED
in
> the middle of the motherboard.Can't even here the pwr supply or nothing.
>
>
> My brother-in-law gave it to me.When I got it somebody had bent the pins
on
> the Duron 800 cpu,so I sttraightened out-carefully.I'm wondering if the
> cpu's shot,or maybe the M.B. also,or maybe(with any luck) I just don't
have
> the pwr sw. wires on the right pins?
>
> tnx in advance
>
>
>
>

[E.P. van Westendorp]

Maybe you can download the A7Pro manual from:
ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133/a7pro/

btw the Asus motherboard newsgroup is alt.comp.periphs.mainboard.asus

--

Eric P. van Westendorp Tel: +31(0252)210579
Reigerslaan 22 2215NN Voorhout Netherlands

Valdivar wrote:
> Asus' site doesn't have a jumper page -yet.Just my luck.
>
> Does anybody have the jumpers for this M.B.....mostly for the case wires:
> spkr,reset,pwr sw. etc.
>
> they are marked,but not very clearly and I can't tell which is voltage and
> which is ground.
>
>
> On top of that,the only thing I get when I turn the pwr on is a green LED in
> the middle of the motherboard.Can't even here the pwr supply or nothing.
>
>
> My brother-in-law gave it to me.When I got it somebody had bent the pins on
> the Duron 800 cpu,so I sttraightened out-carefully.I'm wondering if the
> cpu's shot,or maybe the M.B. also,or maybe(with any luck) I just don't have
> the pwr sw. wires on the right pins?
>
> tnx in advance
>
>
>
>