Error Code (10) with Network Card - Help

[George Herr]

Thanks for the suggestion. Unfortunately, nothing has
changed. I reloaded the motherboard drivers and even
upgraded to the next level BIOS. I still lose the
network card on every reboot as before...
George
>-----Original Message-----
>I suggest you to reinstall your Motherboard Drivers,and
>after this go to Device Manager and check all devices,
>and you will see the status of your Network Card, if
>there is a conflict in there just simply resintall the
>manufaturer driver for your Network Card.
>Good Luck and reply me back when your results.
>Thanks
>Frank
>>-----Original Message-----
>>Every time I reboot, I lose my network card. When I
>>check the device is says the card failed to start and
>>gives me an error code (10).
>>
>>This is just an annoyance at this point since I fix it
>>every time by uninstalling the device and adding it
back
>>in with "add new hardware". I've confirmed this with 3
>>different network cards, so it can't be the card. I've
>>also used different PCI slots. Could it be something
>>with the board? Or is there something I'm missing with
>>Windows XP?
>>
>>If anyone can provide some advice, I'd be very
>greatful...
>>
>>Thanks!
>>
>>Computer Stats:
>>2.53 GHz Intel CPU
>>Gigabyte 8INXP MotherBoard
>>512 MB Memory
>>Windows XP Professional OS
>>
>>.
>>
>.
>