slow booting with a Lexmark P707

[Jaime Raz]

I has just purchased a Lexmark P707 and the PC (Windows XP) boots
very slowly, the "Intel" logo stays for a few minutes, then waits with
a black screen. All this when it is plugged in via the USB port. If I
disconnect the printer form the USB cord the PC boots up starait
forward, and I can then connect the printer and it works This can be
done even before it finished the start up process. My previous
printer, a Lex Z53 worked OK irrespective of whether it is plugged in
before or after the PC has booted up.

>Has anyone got any ideas or suggestions?

[Chuck]

I'd suggest that you take the printer back. Life is too short and printers
too inexpensive to fool with.
Besides, a lot of returns forces the mfr to fix the problem.
"Jaime Raz" > wrote in message
om...
> I has just purchased a Lexmark P707 and the PC (Windows XP) boots
> very slowly, the "Intel" logo stays for a few minutes, then waits with
> a black screen. All this when it is plugged in via the USB port. If I
> disconnect the printer form the USB cord the PC boots up starait
> forward, and I can then connect the printer and it works This can be
> done even before it finished the start up process. My previous
> printer, a Lex Z53 worked OK irrespective of whether it is plugged in
> before or after the PC has booted up.
>
> >Has anyone got any ideas or suggestions?

[Cari \(MS-MVP\)]

It's starting the connection to the scanner unit. Just sit and wait. The
slower the CPU, the slower the bootup will be.
--
Cari
MS-MVP Windows Technologies - Printing/Imaging/Hardware
www.coribright.com

"Chuck" > wrote in message
...
> I'd suggest that you take the printer back. Life is too short and printers
> too inexpensive to fool with.
> Besides, a lot of returns forces the mfr to fix the problem.
> "Jaime Raz" > wrote in message
> om...
>> I has just purchased a Lexmark P707 and the PC (Windows XP) boots
>> very slowly, the "Intel" logo stays for a few minutes, then waits with
>> a black screen. All this when it is plugged in via the USB port. If I
>> disconnect the printer form the USB cord the PC boots up starait
>> forward, and I can then connect the printer and it works This can be
>> done even before it finished the start up process. My previous
>> printer, a Lex Z53 worked OK irrespective of whether it is plugged in
>> before or after the PC has booted up.
>>
>> >Has anyone got any ideas or suggestions?
>
>

[Cari \(MS MVP\)]

25 minutes is a little long! How many programs are you running at Startup?
When was the last time you ran a full antivirus scan with updated
signatures? When was the last time you checked for spyware? Ran a Disk
Cleanup? Defragged your harddrive?
--
Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
www.coribright.com

"andcorp" > wrote in message
...
>
> Cari \(MS-MVP\) wrote:
>> [B]It's starting the connection to the scanner unit. Just sit and
>> wait. The
>> slower the CPU, the slower the bootup will be.
>>
>> I have the same problem with a customers P707.....can take up to 25
>> minutes to boot into windows....surley you shouldnt have to wait that
>> long.
>
>
>
> --
> andcorp
> ------------------------------------------------------------------------
> Posted via http://www.mcse.ms
> ------------------------------------------------------------------------
> View this thread: http://www.mcse.ms/message746388.html
>

[andcorp]

Cari \(MS-MVP\) wrote:
> [B]It's starting the connection to the scanner unit. Just sit and
> wait. The
> slower the CPU, the slower the bootup will be.
>
> I have the same problem with a customers P707.....can take up to 25
> minutes to boot into windows....surley you shouldnt have to wait that
> long.



--
andcorp
------------------------------------------------------------------------
Posted via http://www.mcse.ms
------------------------------------------------------------------------
View this thread: http://www.mcse.ms/message746388.html