Setting front side bus speed

[win]

How do you set the front-side-bus speed. Is this done using the cpu speed
setting in the BIOS. The motherboard supports 266MHz front-side-bus and
the processor speed is 1667MHz, but I'm only getting 1250MHz. I was told
to set the FSB in order to get the maximum processor speed. The settings
for the cpu speed are 100/100MHz, 100/133, 133/133, 166/133. Should I
adjust one of these settings.

[NoNoBadDog!]

You need to contact the maker of your motherboard for this information. The
same information will be in the manual that came with the motherboard.

Bobby

"win" > wrote in message
s.com...
> How do you set the front-side-bus speed. Is this done using the cpu speed
> setting in the BIOS. The motherboard supports 266MHz front-side-bus and
> the processor speed is 1667MHz, but I'm only getting 1250MHz. I was told
> to set the FSB in order to get the maximum processor speed. The settings
> for the cpu speed are 100/100MHz, 100/133, 133/133, 166/133. Should I
> adjust one of these settings.

[Geoffw]

there is a multiplier and FSB

I suggest multiplier of 12.5
FSB 133

if you are getting 1250 I eould think the current setup has
multiplier of 12.5 and FSB of 100

these can be changed in your bios settings

Geoff

"win" > wrote in message
s.com...
> How do you set the front-side-bus speed. Is this done
using the cpu speed
> setting in the BIOS. The motherboard supports 266MHz
front-side-bus and
> the processor speed is 1667MHz, but I'm only getting
1250MHz. I was told
> to set the FSB in order to get the maximum processor
speed. The settings
> for the cpu speed are 100/100MHz, 100/133, 133/133,
166/133. Should I
> adjust one of these settings.