USB 2.0 issues

[Charity Ketchum]

I did that, but this is what happened.


Before updating the drivers from the ASUS website,
whenever I would plug in my USB2.0 CDRW I would receive a
message that the device needed a high speed port and also
the message said no high speed ports were on the
computer. But, most of the ports are 2.0USB. So, I
downloaded the drivers at it fixed all the back ports,
but the front two got worse after the patch.

After installing the USB 2.0 drivers it started giving me
an Unknown Device error when plugging it in...but it
still recognized USB 1.1 items.


>-----Original Message-----
>goto to the ASUS website
>http://www.asus.com/support/download/download.aspx and
>search for the USB 2.0 drivers for your motherboard. I
>had a similar problem and found that you have to update
>the USB drivers.
>
>>-----Original Message-----
>>ASUS P4B266 Motherboard
>>
>>Both front USB ports are hooked up to 2.0USB connector
on
>>MB. Problem: Port will only recognize 1.1 USB items.
If
>>I hook up my Lexar Jumpdrive it recognizes it fine, but
>>if I hook up my external CDRW drive it gives me the USB
>>not recognized error.
>>
>>Note: If I hook up CDRW drive to rear USB2.0 port its
>>fine.
>>.
>>
>.
>