View Full Version : Re: XP startup error!! PLEASE HELP ME!
>-----Original Message-----
>On Thu, 15 Jul 2004 14:31:40 -0700, "Chris"
>
>wrote:
>
>>Ok, whenever I turn on my computer, i get to the blue
>>start u[p screen, but then my computer just stops
>>loading.... it wont take me to the different login
>>accounts, it jsut stops at the blue with the windows
>>logo.... but I cna still move the cursor around. does
>>anyone know how to fix this problem?? i have tried to
>>enter in safe mode and load from "the last confirmed
>>restart" or whatever.
>>
>>Once again, any information on how to solve this will
be
>>GREATLY appreciated!
>>
>>CHRIS
>any messages on the blue screen?
>A stop error code for example?
>
>Dave
>.
>
No messages or anything at all... just the blue screen,
almost as if it is still loading. so earlier today i left
it on for a couple hours, but when i returned i was still
athte startup screen
CHRIS
t.cruise
July 16th 04, 09:18 AM
Try doing a Repair Install:
For a step by step walk through of a
Windows XP Repair Install, including screenshots, go to:
http://www.webtree.ca/windowsxp/repair_xp.htm
When the page opens, scroll down and click on: How To Run A Repair
Install.
--
T.C.
Remove [NoSpam] to reply
"Chris" > wrote in message
...
> Ok, whenever I turn on my computer, i get to the blue
> start u[p screen, but then my computer just stops
> loading.... it wont take me to the different login
> accounts, it jsut stops at the blue with the windows
> logo.... but I cna still move the cursor around. does
> anyone know how to fix this problem?? i have tried to
> enter in safe mode and load from "the last confirmed
> restart" or whatever.
>
> Once again, any information on how to solve this will be
> GREATLY appreciated!
>
> CHRIS
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.720 / Virus Database: 476 - Release Date: 7/14/2004
This happened to me when I changed the IDE bus master driver from the VIA
driver to the Standard Dual Channel driver. Turned out the Standard driver
didn't like the slave drive on the secondary IDE. So it did as you said,
just sat at the start up screen like it was loading but was so slow it would
never get past that even after a couple hours. I finally figured it out
when I saw the WinXP boot CD choke on that drive as I was trying to get to
recovery console. So I just disconnected the secondary slave drive,
restarted, XP loaded fine, I rolled the driver back to the VIA, reconnected
the drive and all was good.
"Chris" > wrote in message
...
> Ok, whenever I turn on my computer, i get to the blue
> start u[p screen, but then my computer just stops
> loading.... it wont take me to the different login
> accounts, it jsut stops at the blue with the windows
> logo.... but I cna still move the cursor around. does
> anyone know how to fix this problem?? i have tried to
> enter in safe mode and load from "the last confirmed
> restart" or whatever.
>
> Once again, any information on how to solve this will be
> GREATLY appreciated!
>
> CHRIS
>-----Original Message-----
>On Thu, 15 Jul 2004 14:31:40 -0700, "Chris"
>
>wrote:
>
>>Ok, whenever I turn on my computer, i get to the blue
>>start u[p screen, but then my computer just stops
>>loading.... it wont take me to the different login
>>accounts, it jsut stops at the blue with the windows
>>logo.... but I cna still move the cursor around. does
>>anyone know how to fix this problem?? i have tried to
>>enter in safe mode and load from "the last confirmed
>>restart" or whatever.
>>
>>Once again, any information on how to solve this will
be
>>GREATLY appreciated!
>>
>>CHRIS
>any messages on the blue screen?
>A stop error code for example?
>
>Dave
>.
>
No messages or anything at all... just the blue screen,
almost as if it is still loading. so earlier today i left
it on for a couple hours, but when i returned i was still
athte startup screen
CHRIS
t.cruise
July 16th 04, 11:45 AM
Try doing a Repair Install:
For a step by step walk through of a
Windows XP Repair Install, including screenshots, go to:
http://www.webtree.ca/windowsxp/repair_xp.htm
When the page opens, scroll down and click on: How To Run A Repair
Install.
--
T.C.
Remove [NoSpam] to reply
"Chris" > wrote in message
...
> Ok, whenever I turn on my computer, i get to the blue
> start u[p screen, but then my computer just stops
> loading.... it wont take me to the different login
> accounts, it jsut stops at the blue with the windows
> logo.... but I cna still move the cursor around. does
> anyone know how to fix this problem?? i have tried to
> enter in safe mode and load from "the last confirmed
> restart" or whatever.
>
> Once again, any information on how to solve this will be
> GREATLY appreciated!
>
> CHRIS
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.720 / Virus Database: 476 - Release Date: 7/14/2004
This happened to me when I changed the IDE bus master driver from the VIA
driver to the Standard Dual Channel driver. Turned out the Standard driver
didn't like the slave drive on the secondary IDE. So it did as you said,
just sat at the start up screen like it was loading but was so slow it would
never get past that even after a couple hours. I finally figured it out
when I saw the WinXP boot CD choke on that drive as I was trying to get to
recovery console. So I just disconnected the secondary slave drive,
restarted, XP loaded fine, I rolled the driver back to the VIA, reconnected
the drive and all was good.
"Chris" > wrote in message
...
> Ok, whenever I turn on my computer, i get to the blue
> start u[p screen, but then my computer just stops
> loading.... it wont take me to the different login
> accounts, it jsut stops at the blue with the windows
> logo.... but I cna still move the cursor around. does
> anyone know how to fix this problem?? i have tried to
> enter in safe mode and load from "the last confirmed
> restart" or whatever.
>
> Once again, any information on how to solve this will be
> GREATLY appreciated!
>
> CHRIS
>-----Original Message-----
>On Thu, 15 Jul 2004 14:31:40 -0700, "Chris"
>
>wrote:
>
>>Ok, whenever I turn on my computer, i get to the blue
>>start u[p screen, but then my computer just stops
>>loading.... it wont take me to the different login
>>accounts, it jsut stops at the blue with the windows
>>logo.... but I cna still move the cursor around. does
>>anyone know how to fix this problem?? i have tried to
>>enter in safe mode and load from "the last confirmed
>>restart" or whatever.
>>
>>Once again, any information on how to solve this will
be
>>GREATLY appreciated!
>>
>>CHRIS
>any messages on the blue screen?
>A stop error code for example?
>
>Dave
>.
>
No messages or anything at all... just the blue screen,
almost as if it is still loading. so earlier today i left
it on for a couple hours, but when i returned i was still
athte startup screen
CHRIS
t.cruise
July 16th 04, 01:38 PM
Try doing a Repair Install:
For a step by step walk through of a
Windows XP Repair Install, including screenshots, go to:
http://www.webtree.ca/windowsxp/repair_xp.htm
When the page opens, scroll down and click on: How To Run A Repair
Install.
--
T.C.
Remove [NoSpam] to reply
"Chris" > wrote in message
...
> Ok, whenever I turn on my computer, i get to the blue
> start u[p screen, but then my computer just stops
> loading.... it wont take me to the different login
> accounts, it jsut stops at the blue with the windows
> logo.... but I cna still move the cursor around. does
> anyone know how to fix this problem?? i have tried to
> enter in safe mode and load from "the last confirmed
> restart" or whatever.
>
> Once again, any information on how to solve this will be
> GREATLY appreciated!
>
> CHRIS
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.720 / Virus Database: 476 - Release Date: 7/14/2004
This happened to me when I changed the IDE bus master driver from the VIA
driver to the Standard Dual Channel driver. Turned out the Standard driver
didn't like the slave drive on the secondary IDE. So it did as you said,
just sat at the start up screen like it was loading but was so slow it would
never get past that even after a couple hours. I finally figured it out
when I saw the WinXP boot CD choke on that drive as I was trying to get to
recovery console. So I just disconnected the secondary slave drive,
restarted, XP loaded fine, I rolled the driver back to the VIA, reconnected
the drive and all was good.
"Chris" > wrote in message
...
> Ok, whenever I turn on my computer, i get to the blue
> start u[p screen, but then my computer just stops
> loading.... it wont take me to the different login
> accounts, it jsut stops at the blue with the windows
> logo.... but I cna still move the cursor around. does
> anyone know how to fix this problem?? i have tried to
> enter in safe mode and load from "the last confirmed
> restart" or whatever.
>
> Once again, any information on how to solve this will be
> GREATLY appreciated!
>
> CHRIS
vBulletin® v3.6.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.