Slipstream CD Sp2 don't boot

[Ed H]

I used Autostreamer (link below) to create an image of WinXP and SP2
slipstreamed together, I have the image but after burning (Easy CD Creator)
it will not boot. Any ideas?

http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585

[Sam]

Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H wrote:

> I used Autostreamer (link below) to create an image of WinXP and SP2
> slipstreamed together, I have the image but after burning (Easy CD Creator)
> it will not boot. Any ideas?
>
> http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585

I just used that same program and then used Nero to create the disk.
It worked like a charm. The ISO image is supposed to be of a bootable
disk, so if its created properly it should work. I would guess that
Easy CD Creator is doing something wrong.

Sam
--
To mail me, please get rid of the BS first

[R. McCarty]

Most likely using Easy CD you neglected to set emulation mode to
none & or the Sector count wasn't toggled to 4.

"Sam" > wrote in message
. ..
> Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H wrote:
>
>> I used Autostreamer (link below) to create an image of WinXP and SP2
>> slipstreamed together, I have the image but after burning (Easy CD
>> Creator)
>> it will not boot. Any ideas?
>>
>> http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585
>
> I just used that same program and then used Nero to create the disk.
> It worked like a charm. The ISO image is supposed to be of a bootable
> disk, so if its created properly it should work. I would guess that
> Easy CD Creator is doing something wrong.
>
> Sam
> --
> To mail me, please get rid of the BS first

[Ed H]

okay, I'll try that
--
Ed H
Dell Dimension 4550, WinXP Home SP1
60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.


"R. McCarty" > wrote in message
hlink.net...
> Most likely using Easy CD you neglected to set emulation mode to
> none & or the Sector count wasn't toggled to 4.
>
> "Sam" > wrote in message
> . ..
> > Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H wrote:
> >
> >> I used Autostreamer (link below) to create an image of WinXP and SP2
> >> slipstreamed together, I have the image but after burning (Easy CD
> >> Creator)
> >> it will not boot. Any ideas?
> >>
> >>
http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585
> >
> > I just used that same program and then used Nero to create the disk.
> > It worked like a charm. The ISO image is supposed to be of a bootable
> > disk, so if its created properly it should work. I would guess that
> > Easy CD Creator is doing something wrong.
> >
> > Sam
> > --
> > To mail me, please get rid of the BS first
>
>

[Ed H]

I do create a "New Bootable CD Project" correct?
--
Ed H
Dell Dimension 4550, WinXP Home SP1
60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.


"Ed H" > wrote in message
...
> okay, I'll try that
> --
> Ed H
> Dell Dimension 4550, WinXP Home SP1
> 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
>
>
> "R. McCarty" > wrote in message
> hlink.net...
> > Most likely using Easy CD you neglected to set emulation mode to
> > none & or the Sector count wasn't toggled to 4.
> >
> > "Sam" > wrote in message
> > . ..
> > > Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H wrote:
> > >
> > >> I used Autostreamer (link below) to create an image of WinXP and SP2
> > >> slipstreamed together, I have the image but after burning (Easy CD
> > >> Creator)
> > >> it will not boot. Any ideas?
> > >>
> > >>
> http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585
> > >
> > > I just used that same program and then used Nero to create the disk.
> > > It worked like a charm. The ISO image is supposed to be of a bootable
> > > disk, so if its created properly it should work. I would guess that
> > > Easy CD Creator is doing something wrong.
> > >
> > > Sam
> > > --
> > > To mail me, please get rid of the BS first
> >
> >
>
>

[Ed H]

Nothing but a blinking white cursor. I don't know.
--
Ed H
Dell Dimension 4550, WinXP Home SP1
60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.


"Ed H" > wrote in message
...
> okay, I'll try that
> --
> Ed H
> Dell Dimension 4550, WinXP Home SP1
> 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
>
>
> "R. McCarty" > wrote in message
> hlink.net...
> > Most likely using Easy CD you neglected to set emulation mode to
> > none & or the Sector count wasn't toggled to 4.
> >
> > "Sam" > wrote in message
> > . ..
> > > Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H wrote:
> > >
> > >> I used Autostreamer (link below) to create an image of WinXP and SP2
> > >> slipstreamed together, I have the image but after burning (Easy CD
> > >> Creator)
> > >> it will not boot. Any ideas?
> > >>
> > >>
> http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585
> > >
> > > I just used that same program and then used Nero to create the disk.
> > > It worked like a charm. The ISO image is supposed to be of a bootable
> > > disk, so if its created properly it should work. I would guess that
> > > Easy CD Creator is doing something wrong.
> > >
> > > Sam
> > > --
> > > To mail me, please get rid of the BS first
> >
> >
>
>

[Sam]

Sometime on, or about Mon, 9 Aug 2004 21:23:16 -0400, Ed H wrote:

> I do create a "New Bootable CD Project" correct?

I don't think so... the ISO image has all the files to make it
bootable already. All you need to do is use the ISO as an image and
burn it. Unfortunately I don't have EZ Creator so I don't know what
they call it.

Sam
--
To mail me, please get rid of the BS first

[Peter]

http://www.tacktech.com/display.cfm?ttid=295
http://www.tacktech.com/display.cfm?ttid=297
http://www.microsoft.com/downloads/details.aspx?familyid=3E90DC91-AC56-4665-949B-BEDA3080E0F6&displaylang=en

Works all the time...

[Ed.]

No, you just click on the ISO image autostreamer made and Roxio will open
and then just burn it. I used AutoStremer yesterday and I have Roxio 7.1
Basic and it worked just fine.

"Ed H" > wrote in message
...
> I do create a "New Bootable CD Project" correct?
> --
> Ed H
> Dell Dimension 4550, WinXP Home SP1
> 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
>
>
> "Ed H" > wrote in message
> ...
> > okay, I'll try that
> > --
> > Ed H
> > Dell Dimension 4550, WinXP Home SP1
> > 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
> >
> >
> > "R. McCarty" > wrote in message
> > hlink.net...
> > > Most likely using Easy CD you neglected to set emulation mode to
> > > none & or the Sector count wasn't toggled to 4.
> > >
> > > "Sam" > wrote in message
> > > . ..
> > > > Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H wrote:
> > > >
> > > >> I used Autostreamer (link below) to create an image of WinXP and
SP2
> > > >> slipstreamed together, I have the image but after burning (Easy CD
> > > >> Creator)
> > > >> it will not boot. Any ideas?
> > > >>
> > > >>
> >
http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585
> > > >
> > > > I just used that same program and then used Nero to create the disk.
> > > > It worked like a charm. The ISO image is supposed to be of a
bootable
> > > > disk, so if its created properly it should work. I would guess that
> > > > Easy CD Creator is doing something wrong.
> > > >
> > > > Sam
> > > > --
> > > > To mail me, please get rid of the BS first
> > >
> > >
> >
> >
>
>

[Rock]

Ed H wrote:

> I do create a "New Bootable CD Project" correct?

This site has instructions for slipstreaming and burning with Roxio Easy
CD/DVD creator 6. I just did it, and it worked fine.

[Rock]

Ed H wrote:

> I do create a "New Bootable CD Project" correct?

ackkk...it would help it include the link. Here it is.

http://www.theeldergeek.com/slipstreamed_xpsp2_cd.htm

[Ed H]

Wow! Sometimes the simplest ways. . . That worked perfect, Thanks R.
--
Ed H
Dell Dimension 4550, WinXP Home SP1
60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.


"Ed." > wrote in message
...
> No, you just click on the ISO image autostreamer made and Roxio will open
> and then just burn it. I used AutoStremer yesterday and I have Roxio 7.1
> Basic and it worked just fine.
>
> "Ed H" > wrote in message
> ...
> > I do create a "New Bootable CD Project" correct?
> > --
> > Ed H
> > Dell Dimension 4550, WinXP Home SP1
> > 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
> >
> >
> > "Ed H" > wrote in message
> > ...
> > > okay, I'll try that
> > > --
> > > Ed H
> > > Dell Dimension 4550, WinXP Home SP1
> > > 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
> > >
> > >
> > > "R. McCarty" > wrote in message
> > > hlink.net...
> > > > Most likely using Easy CD you neglected to set emulation mode to
> > > > none & or the Sector count wasn't toggled to 4.
> > > >
> > > > "Sam" > wrote in message
> > > > . ..
> > > > > Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H wrote:
> > > > >
> > > > >> I used Autostreamer (link below) to create an image of WinXP and
> SP2
> > > > >> slipstreamed together, I have the image but after burning (Easy
CD
> > > > >> Creator)
> > > > >> it will not boot. Any ideas?
> > > > >>
> > > > >>
> > >
> http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585
> > > > >
> > > > > I just used that same program and then used Nero to create the
disk.
> > > > > It worked like a charm. The ISO image is supposed to be of a
> bootable
> > > > > disk, so if its created properly it should work. I would guess
that
> > > > > Easy CD Creator is doing something wrong.
> > > > >
> > > > > Sam
> > > > > --
> > > > > To mail me, please get rid of the BS first
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Ed H]

Wow! Sometimes the simplest ways. . . That worked perfect, Thanks R.
--
Ed H
Dell Dimension 4550, WinXP Home SP1
60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.

"Ed." > wrote in message
...
> No, you just click on the ISO image autostreamer made and Roxio will open
> and then just burn it. I used AutoStremer yesterday and I have Roxio 7.1
> Basic and it worked just fine.
>
> "Ed H" > wrote in message
> ...
> > I do create a "New Bootable CD Project" correct?
> > --
> > Ed H
> > Dell Dimension 4550, WinXP Home SP1
> > 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
> >
> >
> > "Ed H" > wrote in message
> > ...
> > > okay, I'll try that
> > > --
> > > Ed H
> > > Dell Dimension 4550, WinXP Home SP1
> > > 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
> > >
> > >
> > > "R. McCarty" > wrote in message
> > > hlink.net...
> > > > Most likely using Easy CD you neglected to set emulation mode to
> > > > none & or the Sector count wasn't toggled to 4.
> > > >
> > > > "Sam" > wrote in message
> > > > . ..
> > > > > Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H wrote:
> > > > >
> > > > >> I used Autostreamer (link below) to create an image of WinXP and
> SP2
> > > > >> slipstreamed together, I have the image but after burning (Easy
CD
> > > > >> Creator)
> > > > >> it will not boot. Any ideas?
> > > > >>
> > > > >>
> > >
> http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585
> > > > >
> > > > > I just used that same program and then used Nero to create the
disk.
> > > > > It worked like a charm. The ISO image is supposed to be of a
> bootable
> > > > > disk, so if its created properly it should work. I would guess tha
t
> > > > > Easy CD Creator is doing something wrong.
> > > > >
> > > > > Sam
> > > > > --
> > > > > To mail me, please get rid of the BS first
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Ed.]

Great. Glad you got it going.

"Ed H" > wrote in message
...
> Wow! Sometimes the simplest ways. . . That worked perfect, Thanks R.
> --
> Ed H
> Dell Dimension 4550, WinXP Home SP1
> 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
>
> "Ed." > wrote in message
> ...
> > No, you just click on the ISO image autostreamer made and Roxio will
open
> > and then just burn it. I used AutoStremer yesterday and I have Roxio 7.1
> > Basic and it worked just fine.
> >
> > "Ed H" > wrote in message
> > ...
> > > I do create a "New Bootable CD Project" correct?
> > > --
> > > Ed H
> > > Dell Dimension 4550, WinXP Home SP1
> > > 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
> > >
> > >
> > > "Ed H" > wrote in message
> > > ...
> > > > okay, I'll try that
> > > > --
> > > > Ed H
> > > > Dell Dimension 4550, WinXP Home SP1
> > > > 60 Gig. HD, 512 DDR, Pentium IV 2.40 GHz.
> > > >
> > > >
> > > > "R. McCarty" > wrote in message
> > > > hlink.net...
> > > > > Most likely using Easy CD you neglected to set emulation mode to
> > > > > none & or the Sector count wasn't toggled to 4.
> > > > >
> > > > > "Sam" > wrote in message
> > > > > . ..
> > > > > > Sometime on, or about Mon, 9 Aug 2004 20:21:53 -0400, Ed H
wrote:
> > > > > >
> > > > > >> I used Autostreamer (link below) to create an image of WinXP
and
> > SP2
> > > > > >> slipstreamed together, I have the image but after burning (Easy
> CD
> > > > > >> Creator)
> > > > > >> it will not boot. Any ideas?
> > > > > >>
> > > > > >>
> > > >
> >
http://www.neowin.net/forum/index.php?showtopic=188337&st=0&#entry2453585
> > > > > >
> > > > > > I just used that same program and then used Nero to create the
> disk.
> > > > > > It worked like a charm. The ISO image is supposed to be of a
> > bootable
> > > > > > disk, so if its created properly it should work. I would guess
tha
> t
> > > > > > Easy CD Creator is doing something wrong.
> > > > > >
> > > > > > Sam
> > > > > > --
> > > > > > To mail me, please get rid of the BS first
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>