SP2 fails to install properly

[Richard]

After downloading the SP2 file, the installer is
initialized and it starts to install SP2 (update 1 0f 1).

1. After about 10 minutes, there is a red Message
Box "Access is Denied," with an OK box to check. Then
2. Message box: "SP2 did not completely install. Select
OK to undo changes."
3. "Windows XP2 Removal Wizard" supposedly removes the
bad SP2 install.
4. Message box: "SP2 installation did not complete.
Windows XP has been partially updated and may not work
properly."

Questions:
1. Why was access denied? I was logged on as a user
with Administrator privleges.

2. There were 15 SP2 hotfixes installed. How many SP2
hotfixes should be installed when it's successful?

3. How can I reinstall SP2 and check for OS System
Integrity after a SP2 install?

[r]

You receive an "Access is denied" error message when you try to install
Windows XP Service Pack 2:
http://support.microsoft.com/default.aspx?scid=kb;en-us;873148&Product=windowsxpsp2

How to successfully install Windows XP Service Pack 2:
http://www.fixyourwindows.com/winxpsp2install.htm

Good Luck!
---
Spyware/Virus Removal and Prevention:
http://www.fixyourwindows.com/windowsxpsolutions.htm
(Links to online virus scans on the same page)

How to optimize Windows XP, 2000, ME
for the best performance (Step-by-step Visual Guide):
http://www.fixyourwindows.com







"Richard" wrote:

> After downloading the SP2 file, the installer is
> initialized and it starts to install SP2 (update 1 0f 1).
>
> 1. After about 10 minutes, there is a red Message
> Box "Access is Denied," with an OK box to check. Then
> 2. Message box: "SP2 did not completely install. Select
> OK to undo changes."
> 3. "Windows XP2 Removal Wizard" supposedly removes the
> bad SP2 install.
> 4. Message box: "SP2 installation did not complete.
> Windows XP has been partially updated and may not work
> properly."
>
> Questions:
> 1. Why was access denied? I was logged on as a user
> with Administrator privleges.
>
> 2. There were 15 SP2 hotfixes installed. How many SP2
> hotfixes should be installed when it's successful?
>
> 3. How can I reinstall SP2 and check for OS System
> Integrity after a SP2 install?
>

[Torgeir Bakken \(MVP\)]

Richard wrote:

> After downloading the SP2 file, the installer is
> initialized and it starts to install SP2 (update 1 0f 1).
>
> 1. After about 10 minutes, there is a red Message
> Box "Access is Denied," with an OK box to check. Then
> 2. Message box: "SP2 did not completely install. Select
> OK to undo changes."
> 3. "Windows XP2 Removal Wizard" supposedly removes the
> bad SP2 install.
> 4. Message box: "SP2 installation did not complete.
> Windows XP has been partially updated and may not work
> properly."
>
> Questions:
> 1. Why was access denied? I was logged on as a user
> with Administrator privleges.


See the the "Access denied" section here:

http://www.michna.com/kb/WxSP2.htm#Cannot_install_Service_Pack_2


> 2. There were 15 SP2 hotfixes installed. How many SP2
> hotfixes should be installed when it's successful?

Zero.


> 3. How can I reinstall SP2 and check for OS System
> Integrity after a SP2 install?


--
torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
Administration scripting examples and an ONLINE version of
the 1328 page Scripting Guide:
http://www.microsoft.com/technet/scriptcenter/default.mspx