SP2 and Canon printers

[skidpan]

Since installing SP2 on my PC network at home, I have
been unable to print to my 2 shared Canon S450 printers
except from the PCs they are directly connected to.

I have no problems printed to my shared HP Lasetjet 4ML
so I assume the problem lies somewheer between SP2 and
the Canon printers.

Any advice?

[Richard Urban]

You need to have the drivers for said Canon printers installed on the
machine you are trying to print FROM.

--
Regards:

Richard Urban


aka Crusty (-: Old B@stard :-)


"skidpan" > wrote in message
...
> Since installing SP2 on my PC network at home, I have
> been unable to print to my 2 shared Canon S450 printers
> except from the PCs they are directly connected to.
>
> I have no problems printed to my shared HP Lasetjet 4ML
> so I assume the problem lies somewheer between SP2 and
> the Canon printers.
>
> Any advice?

The drivers are installed on each PC and all was working
OK before SP2.

Simon
>-----Original Message-----
>You need to have the drivers for said Canon printers
installed on the
>machine you are trying to print FROM.
>
>--
>Regards:
>
>Richard Urban
>
>
>aka Crusty (-: Old B@stard :-)
>
>
>"skidpan" > wrote in
message
...
>> Since installing SP2 on my PC network at home, I have
>> been unable to print to my 2 shared Canon S450 printers
>> except from the PCs they are directly connected to.
>>
>> I have no problems printed to my shared HP Lasetjet 4ML
>> so I assume the problem lies somewheer between SP2 and
>> the Canon printers.
>>
>> Any advice?
>
>
>.
>

[Richard Urban]

You did try to reinstall the drivers - right!

--
Regards:

Richard Urban


aka Crusty (-: Old B@stard :-)


> wrote in message
...
> The drivers are installed on each PC and all was working
> OK before SP2.
>
> Simon
>>-----Original Message-----
>>You need to have the drivers for said Canon printers
> installed on the
>>machine you are trying to print FROM.
>>
>>--
>>Regards:
>>
>>Richard Urban
>>
>>
>>aka Crusty (-: Old B@stard :-)
>>
>>
>>"skidpan" > wrote in
> message
...
>>> Since installing SP2 on my PC network at home, I have
>>> been unable to print to my 2 shared Canon S450 printers
>>> except from the PCs they are directly connected to.
>>>
>>> I have no problems printed to my shared HP Lasetjet 4ML
>>> so I assume the problem lies somewheer between SP2 and
>>> the Canon printers.
>>>
>>> Any advice?
>>
>>
>>.
>>

[Rock]

skidpan wrote:

> Since installing SP2 on my PC network at home, I have
> been unable to print to my 2 shared Canon S450 printers
> except from the PCs they are directly connected to.
>
> I have no problems printed to my shared HP Lasetjet 4ML
> so I assume the problem lies somewheer between SP2 and
> the Canon printers.
>
> Any advice?

Check with canon for updated drives post SP2.

[Opinicus]

"skidpan" > wrote

> Since installing SP2 on my PC network at home, I have
> been unable to print to my 2 shared Canon S450 printers
> except from the PCs they are directly connected to.

I've seen at least one other Canon user who said that his
hardware didn't work after SP2. You should check with Canon
for new drivers.

--
Bob
Kanyak's Doghouse
http://www.kanyak.com

[Unknown]

Check your network settings. Look up printer sharing.
> wrote in message
...
> The drivers are installed on each PC and all was working
> OK before SP2.
>
> Simon
>>-----Original Message-----
>>You need to have the drivers for said Canon printers
> installed on the
>>machine you are trying to print FROM.
>>
>>--
>>Regards:
>>
>>Richard Urban
>>
>>
>>aka Crusty (-: Old B@stard :-)
>>
>>
>>"skidpan" > wrote in
> message
...
>>> Since installing SP2 on my PC network at home, I have
>>> been unable to print to my 2 shared Canon S450 printers
>>> except from the PCs they are directly connected to.
>>>
>>> I have no problems printed to my shared HP Lasetjet 4ML
>>> so I assume the problem lies somewheer between SP2 and
>>> the Canon printers.
>>>
>>> Any advice?
>>
>>
>>.
>>

[Torgeir Bakken \(MVP\)]

skidpan wrote:

> Since installing SP2 on my PC network at home, I have
> been unable to print to my 2 shared Canon S450 printers
> except from the PCs they are directly connected to.
>
> I have no problems printed to my shared HP Lasetjet 4ML
> so I assume the problem lies somewheer between SP2 and
> the Canon printers.
>
> Any advice?
Hi

If this is MPC190 / MPC200, Canon have released a fix for this:

Does my MPC190 / MPC200 work with Windows XP Service Pack 2?
http://www.canon.com.au/support/customer/default.asp?DXI=KnowledgeBase/Customer/KBArticleForm&File=KB01347&productID=mpc200


You can also edit the file MpNetIpc.ini to solve this problem:

From: scottwoodward )
Subject: Re: XP SP2 install messed up Canon MPC600f driver
Newsgroups: microsoft.public.windowsxp.hardware
Date: 2004-08-22 01:55:58 PST
http://groups.google.com/groups?threadm=scottwoodward.1bdtva%40news.nospam. local

<quote>
edit the file MPNETIPC.INI and change the 127.0.0.2 in the file to
127.0.0.1, this will resolve this problem (per canon tech support).
The file should be in \windows\system32

scottwoodward
</quote>


From: Jerome )
Subject: Re: Printing issues with SP2
Newsgroups: microsoft.public.windowsxp.perform_maintain
Date: 2004-09-03 13:07:32 PST
http://groups.google.com/groups?threadm=61925775.0409031207.36c64744%40post ing.google.com

<quote>
PROBLEM SOLVED ! PROBLEM SOLVED ! PROBLEM SOLVED !
MPC190 / MPC200 + XPSP2 : unable to explore myComputer + unable to
connect to printer or scan. I suppose it solves similar problems with
a lot of canon printers.

Edit C:\WINDOWS\system32\MpNetIpc.ini
Change 127.0.0.2 to 127.0.0.1
(because XP SP2 does not allow loopback on other address)
That'all... and it works !

Enjoy,
Jerome.
</quote>



--
torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
Administration scripting examples and an ONLINE version of
the 1328 page Scripting Guide:
http://www.microsoft.com/technet/scriptcenter/default.mspx