Changing to new motherboard and chipset

[Paul B. Carnall]

I would like to upgrade my existing motherboard and CPU to a more powerful
and speedy system (A motherboard that supports 333FSB, 400MHz DDR & 8X AGP
Graphics)
My current hard drive is partitioned in 2 roughly equal partitions the C
drive which is the system drive holding my WIN XP Home Edition together with
all Program (Application) Files and the D drive which holds all my storage
folders and files.
It is not a problem for me to re-install all of my Program (Application)
Files again following the re-installation of WIN XP.
Can someone advise me the correct procedures for doing what I would like to
do.
The physical changing of the motherboard with its new CPU and installing new
RAM and remaking all the connections is not problematical - it's what I have
to do technically to achieve a successful change.
Your help would be greatly appreciated
Many thanks
Paul

[Danny Bleu]

IMO, your best option is to perform a 'clean' install on your C drive ( boot
form CD and proceeed accordingly ) and reactivate your XP when requested.

"Paul B. Carnall" > wrote in message
...
I would like to upgrade my existing motherboard and CPU to a more powerful
and speedy system (A motherboard that supports 333FSB, 400MHz DDR & 8X AGP
Graphics)
My current hard drive is partitioned in 2 roughly equal partitions the C
drive which is the system drive holding my WIN XP Home Edition together with
all Program (Application) Files and the D drive which holds all my storage
folders and files.
It is not a problem for me to re-install all of my Program (Application)
Files again following the re-installation of WIN XP.
Can someone advise me the correct procedures for doing what I would like to
do.
The physical changing of the motherboard with its new CPU and installing new
RAM and remaking all the connections is not problematical - it's what I have
to do technically to achieve a successful change.
Your help would be greatly appreciated
Many thanks
Paul

[Sharon F]

On Mon, 3 Nov 2003 18:05:14 -0000, Paul B. Carnall wrote:

> I would like to upgrade my existing motherboard and CPU to a more powerful
> and speedy system (A motherboard that supports 333FSB, 400MHz DDR & 8X AGP
> Graphics)
> My current hard drive is partitioned in 2 roughly equal partitions the C
> drive which is the system drive holding my WIN XP Home Edition together with
> all Program (Application) Files and the D drive which holds all my storage
> folders and files.
> It is not a problem for me to re-install all of my Program (Application)
> Files again following the re-installation of WIN XP.
> Can someone advise me the correct procedures for doing what I would like to
> do.
> The physical changing of the motherboard with its new CPU and installing new
> RAM and remaking all the connections is not problematical - it's what I have
> to do technically to achieve a successful change.
> Your help would be greatly appreciated
> Many thanks
> Paul

A change in motherboard and processor can go either way: no extra steps
necessary -or- a repair install is needed. When I changed my motherboard
(but used the same processor), I had to perform a repair install. Since your
new motherboard and processor are very different from the ones you're using
now, it's likely that you will need to do a repair install as well.

A link to some good clear directions for this process:
http://michaelstevenstech.com/XPrepairinstall.htm

Repair installs leave everything intact (settings, programs and data) but
it's still prudent to back up critcal data "just in case" a problem
develops.

NOTES: I bypass the offer during the install to go online and look for
updates. Instead I install drivers after the basic install has finished. You
will need to visit Windows Update to reinstall updates. Be sure to enable
your firewall before going online!

When it comes to activation, you will either activate online or you will be
prompted to call. If prompted to call, do so. When you click on the call
option, a screen appears asking what country you're calling from. The next
screen will give you the needed phone number and will display a long
string of numbers. Keep this screen up while making the call.

If you get a real live person instead of the automated voice, just tell
them you've upgraded the hardware and reinstalled. You will then read
them the long string of numbers from your screen and they'll read back a
second long string of numbers that you will type in. Keep the person on
the phone until you're finished and get the "Thank you, activation
complete" screen.

When you make the activation call, you may get an automated voice instead.
This works very much the same as the above but you will punch in the string
of numbers (or read them) on the phone and the autovoice will give you the
needed second string. The phone menu offers a repeat of the numbers and
you can use that option to double check your typing.

It took a lot of typing to explain the activation call but on the average
it takes less than 5 minutes to complete.

Good luck and enjoy your upgrade!

--
Sharon F
MS MVP - Windows Shell/User

[Bruce Chambers]

Greetings --

Normally, unless the new motherboard is virtually identical to the
old one (same chipset, same IDE controllers, same BIOS version, etc.),
you'll need to perform a repair (a.k.a. in-place upgrade)
installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

As always when undertaking such a significant change, back up any
important data before starting.

This will probably also require re-activation. If it's been more
than 120 days since you last activated that specific Product Key,
you'll most likely be able to activate via the internet without
problem. If it's been less, you might have to make a 5 minute phone
call.


Bruce Chambers

--
Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html

You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH


"Paul B. Carnall" > wrote in message
...
> I would like to upgrade my existing motherboard and CPU to a more
powerful
> and speedy system (A motherboard that supports 333FSB, 400MHz DDR &
8X AGP
> Graphics)
> My current hard drive is partitioned in 2 roughly equal partitions
the C
> drive which is the system drive holding my WIN XP Home Edition
together with
> all Program (Application) Files and the D drive which holds all my
storage
> folders and files.
> It is not a problem for me to re-install all of my Program
(Application)
> Files again following the re-installation of WIN XP.
> Can someone advise me the correct procedures for doing what I would
like to
> do.
> The physical changing of the motherboard with its new CPU and
installing new
> RAM and remaking all the connections is not problematical - it's
what I have
> to do technically to achieve a successful change.
> Your help would be greatly appreciated
> Many thanks
> Paul
>
>

[Kenny]

After fitting new hardware boot from XP CD and do a Repair install.

--

Kenny


"Paul B. Carnall" > wrote in message
...
> I would like to upgrade my existing motherboard and CPU to a more powerful
> and speedy system (A motherboard that supports 333FSB, 400MHz DDR & 8X AGP
> Graphics)
> My current hard drive is partitioned in 2 roughly equal partitions the C
> drive which is the system drive holding my WIN XP Home Edition together
with
> all Program (Application) Files and the D drive which holds all my storage
> folders and files.
> It is not a problem for me to re-install all of my Program (Application)
> Files again following the re-installation of WIN XP.
> Can someone advise me the correct procedures for doing what I would like
to
> do.
> The physical changing of the motherboard with its new CPU and installing
new
> RAM and remaking all the connections is not problematical - it's what I
have
> to do technically to achieve a successful change.
> Your help would be greatly appreciated
> Many thanks
> Paul
>
>