HP USB printer and XP SP2

[Patrick L.]

Hi,

It seems that since I installed XP SP2 on my Toshiba laptop, I can no longer
print when the computer resumes from standby. Restarting will fix the problem!

I use a HP 2410 USB printer and I made sure there was no update available
from HP.

Any suggestions or do I need to deinstall SP2! Thanks, Patrick

[notisnotme]

had about the same problem with my lexmark x63 and
lexmark has not been any help. Print one job the says
divice is busy restart the computer or reload the
software and to works agian for one job
>-----Original Message-----
>Hi,
>
>It seems that since I installed XP SP2 on my Toshiba
laptop, I can no longer
>print when the computer resumes from standby. Restarting
will fix the problem!
>
>I use a HP 2410 USB printer and I made sure there was no
update available
>from HP.
>
>Any suggestions or do I need to deinstall SP2! Thanks,
Patrick
>.
>

[R. McCarty]

USB ports by default use Power Savings mode. Likely, the USB
channel itself isn't waking up properly.
To check, go to Device Manager and Double-Click each USB Hub.
There is a Power Management Tab where the Power Savings mode
can be selected.

"Patrick L." > wrote in message
...
> Hi,
>
> It seems that since I installed XP SP2 on my Toshiba laptop, I can no
> longer
> print when the computer resumes from standby. Restarting will fix the
> problem!
>
> I use a HP 2410 USB printer and I made sure there was no update available
> from HP.
>
> Any suggestions or do I need to deinstall SP2! Thanks, Patrick

[CWatters]

"Patrick L." > wrote in message
...
> Hi,
>
> It seems that since I installed XP SP2 on my Toshiba laptop, I can no
longer
> print when the computer resumes from standby. Restarting will fix the
problem!
>
> I use a HP 2410 USB printer and I made sure there was no update available
> from HP.
>
> Any suggestions or do I need to deinstall SP2! Thanks, Patrick

I think I've seen several similar posts recently. Might be worth searching
this newsgroup at google.