SP2 and Incoming connections

[Birdy]

Hello together,
we place XP systems at our customers and we perform helpdesk through ISDN
dialup and pcAnywhere. When installing SP2, we can dial in to the system but
not ping them any more and we can't connect using the IP-address (e.g.
\\192.168.115.10\C$) even I've enabled F&P sharing, ICMP,.... When disabling
the FW, everything works fine. Is there anything else to configure the FW to
allow pinging through an incoming dial-up connection?

[Olly]

so, maybe you can go in the firewall settings and klick
on exeptions and add a program. so now you can add
ping.exe, lays in system32, and it should work fine.


>-----Original Message-----
>Hello together,
>we place XP systems at our customers and we perform
helpdesk through ISDN
>dialup and pcAnywhere. When installing SP2, we can dial
in to the system but
>not ping them any more and we can't connect using the IP-
address (e.g.
>\\192.168.115.10\C$) even I've enabled F&P sharing,
ICMP,.... When disabling
>the FW, everything works fine. Is there anything else to
configure the FW to
>allow pinging through an incoming dial-up connection?
>.
>

[Jenifer Scot]

Yes you can set third party cookies in your browsre
settings, as well as set them in the firewall, to allow
or block sites.
>-----Original Message-----
>Hello together,
>we place XP systems at our customers and we perform
helpdesk through ISDN
>dialup and pcAnywhere. When installing SP2, we can dial
in to the system but
>not ping them any more and we can't connect using the IP-
address (e.g.
>\\192.168.115.10\C$) even I've enabled F&P sharing,
ICMP,.... When disabling
>the FW, everything works fine. Is there anything else to
configure the FW to
>allow pinging through an incoming dial-up connection?
>.
>

[Quaoar]

Birdy wrote:
> Hello together,
> we place XP systems at our customers and we perform helpdesk through
> ISDN dialup and pcAnywhere. When installing SP2, we can dial in to
> the system but not ping them any more and we can't connect using the
> IP-address (e.g. \\192.168.115.10\C$) even I've enabled F&P sharing,
> ICMP,.... When disabling the FW, everything works fine. Is there
> anything else to configure the FW to allow pinging through an
> incoming dial-up connection?

http://www.computing.net/windowsxp/wwwboard/forum/113976.html