Help....I don't know what I'm doing

[Dan]

I just installed a new hard drive in master position and
put my old hard drive in slave. I also installed more RAM
256M and put my old 128M in the secondary position. I
also put in a new CDRW and put it in master position and
put the old CD reader in slave position. I checked to
make sure that they all were connected correctly and had
power. It is obvious that the all have power because
their lights come on when I turn the computer on.

I turned the computer on and put a new XP Home Edition
disk (not the upgrade) in the master CD. Nothing happened
except to want to take me to the CMOS setup and bios
screen. Nothing Windows comes up.

What do you think is wrong? All of my new hardware is
compatible and I'm running a Pentium III 500MHz.

[Doug Knox MS-MVP]

Go back to your original configuration and make your changes one at a time.

--
Doug Knox, MS-MVP Windows XP/ Windows Smart Display
Win 95/98/Me/XP Tweaks and Fixes
http://www.dougknox.com
--------------------------------
Associate Expert
ExpertZone - http://www.microsoft.com/windowsxp/expertzone
--------------------------------
Please reply only to the newsgroup so all may benefit.
Unsolicited e-mail is not answered.

"Dan" > wrote in message
...
> I just installed a new hard drive in master position and
> put my old hard drive in slave. I also installed more RAM
> 256M and put my old 128M in the secondary position. I
> also put in a new CDRW and put it in master position and
> put the old CD reader in slave position. I checked to
> make sure that they all were connected correctly and had
> power. It is obvious that the all have power because
> their lights come on when I turn the computer on.
>
> I turned the computer on and put a new XP Home Edition
> disk (not the upgrade) in the master CD. Nothing happened
> except to want to take me to the CMOS setup and bios
> screen. Nothing Windows comes up.
>
> What do you think is wrong? All of my new hardware is
> compatible and I'm running a Pentium III 500MHz.
>
>

[Doug Knox MS-MVP]

Go back to your original configuration and make your changes one at a time.

--
Doug Knox, MS-MVP Windows XP/ Windows Smart Display
Win 95/98/Me/XP Tweaks and Fixes
http://www.dougknox.com
--------------------------------
Associate Expert
ExpertZone - http://www.microsoft.com/windowsxp/expertzone
--------------------------------
Please reply only to the newsgroup so all may benefit.
Unsolicited e-mail is not answered.

"Dan" > wrote in message
...
> I just installed a new hard drive in master position and
> put my old hard drive in slave. I also installed more RAM
> 256M and put my old 128M in the secondary position. I
> also put in a new CDRW and put it in master position and
> put the old CD reader in slave position. I checked to
> make sure that they all were connected correctly and had
> power. It is obvious that the all have power because
> their lights come on when I turn the computer on.
>
> I turned the computer on and put a new XP Home Edition
> disk (not the upgrade) in the master CD. Nothing happened
> except to want to take me to the CMOS setup and bios
> screen. Nothing Windows comes up.
>
> What do you think is wrong? All of my new hardware is
> compatible and I'm running a Pentium III 500MHz.
>
>