network stop working after xp sp2 installed

[victor]

i have two computers connected with a d-link router to share internet
connection and files. before sp2 installed, everything works fine. but after
the automatic upgrade, the other computer is not visible, and even worse, the
sharing folder in each computer became unaccessible. the error message reads
"no permission", but this is not accessed from other computer. please help.
thanks.

[Venkatesh [MS India Community Star]]

Hi there victor,

Installing Windows firewall activates the Windows firewall by default. The
issue you are experiencing is likely because of the Windows firewall which by
default blocks network traffic. To learn more about configuring Windows
firewall and setting up exceptions, see here:
http://support.microsoft.com/kb/875357

HTH
Venkatesh

"victor" wrote:

> i have two computers connected with a d-link router to share internet
> connection and files. before sp2 installed, everything works fine. but after
> the automatic upgrade, the other computer is not visible, and even worse, the
> sharing folder in each computer became unaccessible. the error message reads
> "no permission", but this is not accessed from other computer. please help.
> thanks.

[Venkatesh [MS India Community Star]]

Sorry for thre typo. I meant installing Windows XP sp2 activates the Windows
firewall by default.

Venkatesh

"Venkatesh [MS India Community Star]" wrote:

> Hi there victor,
>
> Installing Windows firewall activates the Windows firewall by default. The
> issue you are experiencing is likely because of the Windows firewall which by
> default blocks network traffic. To learn more about configuring Windows
> firewall and setting up exceptions, see here:
> http://support.microsoft.com/kb/875357
>
> HTH
> Venkatesh
>
> "victor" wrote:
>
> > i have two computers connected with a d-link router to share internet
> > connection and files. before sp2 installed, everything works fine. but after
> > the automatic upgrade, the other computer is not visible, and even worse, the
> > sharing folder in each computer became unaccessible. the error message reads
> > "no permission", but this is not accessed from other computer. please help.
> > thanks.

[victor]

thanks for the link, though it is too confusing. is it possible to disable
this firewall? 'cause i have in the router already.
tks.

"Venkatesh [MS India Community Star]" wrote:

> Hi there victor,
>
> Installing Windows firewall activates the Windows firewall by default. The
> issue you are experiencing is likely because of the Windows firewall which by
> default blocks network traffic. To learn more about configuring Windows
> firewall and setting up exceptions, see here:
> http://support.microsoft.com/kb/875357
>
> HTH
> Venkatesh
>
> "victor" wrote:
>
> > i have two computers connected with a d-link router to share internet
> > connection and files. before sp2 installed, everything works fine. but after
> > the automatic upgrade, the other computer is not visible, and even worse, the
> > sharing folder in each computer became unaccessible. the error message reads
> > "no permission", but this is not accessed from other computer. please help.
> > thanks.

[victor]

still not working when firewall turned off.

"Venkatesh [MS India Community Star]" wrote:

> Hi there victor,
>
> Installing Windows firewall activates the Windows firewall by default. The
> issue you are experiencing is likely because of the Windows firewall which by
> default blocks network traffic. To learn more about configuring Windows
> firewall and setting up exceptions, see here:
> http://support.microsoft.com/kb/875357
>
> HTH
> Venkatesh
>
> "victor" wrote:
>
> > i have two computers connected with a d-link router to share internet
> > connection and files. before sp2 installed, everything works fine. but after
> > the automatic upgrade, the other computer is not visible, and even worse, the
> > sharing folder in each computer became unaccessible. the error message reads
> > "no permission", but this is not accessed from other computer. please help.
> > thanks.

[Venkatesh]

Please follow the below steps to disable the Windows XP Sp2 firewall:


1. Click Start, run, type "firewall.cpl" (with out quotation marks)
and click OK.
2. In the resulting window, under the General tab, selet OFF (Not
recommended) option is checked.
3. Click OK.

HTH
Venkatesh

victor > wrote in message >...
> still not working when firewall turned off.
>
> "Venkatesh [MS India Community Star]" wrote:
>
> > Hi there victor,
> >
> > Installing Windows firewall activates the Windows firewall by default. The
> > issue you are experiencing is likely because of the Windows firewall which by
> > default blocks network traffic. To learn more about configuring Windows
> > firewall and setting up exceptions, see here:
> > http://support.microsoft.com/kb/875357
> >
> > HTH
> > Venkatesh
> >
> > "victor" wrote:
> >
> > > i have two computers connected with a d-link router to share internet
> > > connection and files. before sp2 installed, everything works fine. but after
> > > the automatic upgrade, the other computer is not visible, and even worse, the
> > > sharing folder in each computer became unaccessible. the error message reads
> > > "no permission", but this is not accessed from other computer. please help.
> > > thanks.