Installed SP2, major problems and is now rebooting

[Fire]

I recently installed SP2. when i restarted the computer afterwards, it kept
freezing. So i decided it wasnt a good idea for my computer, and i put it
into safe mode and tried to do a system restore. while it was restoring
files, my computer froze on a certain spot, and stayed there for 20 minutes.
i shut it off and turned it back on in hope of trying it again. but what
came up was not pretty.
My computer would start and then go to a black screen that says something
along the lines of "your computer was not shut down properly, please click on
one of the following types..." it gave me safe mode, safe mode w/networking,
safe mode w/command prompt, good local config setting, and start windows
normally. ive tried all five, and what happens it starts to try and load, a
blue screen w/words flashes and restarts it all over again. i do not know
what happened and i need help. what should i do?

[learning 101]

This happened with me a week ago, was trying to put SP2 on a computer with a
Prescott Processor. I had to upgrade the bios, then it went into windows
just as smooth as can be. Not sure what you are running, but this was a
thought.

"Fire" wrote:

> I recently installed SP2. when i restarted the computer afterwards, it kept
> freezing. So i decided it wasnt a good idea for my computer, and i put it
> into safe mode and tried to do a system restore. while it was restoring
> files, my computer froze on a certain spot, and stayed there for 20 minutes.
> i shut it off and turned it back on in hope of trying it again. but what
> came up was not pretty.
> My computer would start and then go to a black screen that says something
> along the lines of "your computer was not shut down properly, please click on
> one of the following types..." it gave me safe mode, safe mode w/networking,
> safe mode w/command prompt, good local config setting, and start windows
> normally. ive tried all five, and what happens it starts to try and load, a
> blue screen w/words flashes and restarts it all over again. i do not know
> what happened and i need help. what should i do?

[WTC]

Could be your hardware is not compatible with SP2, you check with the
manufacturer of all your hardware.

--
William
MS-7008 PT880 Neo LSR MoBo
Intel P4 3eGHz 1MB L2 800 FSB
256MB DDR 400 X 4
ATI Radeon 9550 AGP 256MB 8X
Maxtor - 80GB IDE, 20GB IDE
DVD-RW and CD-RW Drives
SB Live!5.1
17" Sony Trinitron
Windows XP Pro SP2
Norton Internet Security 2005


"Fire" > wrote in message
...
>I recently installed SP2. when i restarted the computer afterwards, it kept
> freezing. So i decided it wasnt a good idea for my computer, and i put it
> into safe mode and tried to do a system restore. while it was restoring
> files, my computer froze on a certain spot, and stayed there for 20
> minutes.
> i shut it off and turned it back on in hope of trying it again. but what
> came up was not pretty.
> My computer would start and then go to a black screen that says something
> along the lines of "your computer was not shut down properly, please click
> on
> one of the following types..." it gave me safe mode, safe mode
> w/networking,
> safe mode w/command prompt, good local config setting, and start windows
> normally. ive tried all five, and what happens it starts to try and load,
> a
> blue screen w/words flashes and restarts it all over again. i do not know
> what happened and i need help. what should i do?

[Jupiter Jones [MVP]]

How to use the Automatic Recovery feature to recover your computer if
the Windows XP Service Pack 2 Setup program is not completed
successfully:
http://support.microsoft.com/?id=875355

If you have a Prescott processor, see the information about Prescott
on the link below.

Reboot tapping F8 each second.
Select "Last known good configuration" at the menu.
If that fails, reboot tapping F8 again this time choosing Safe Mode.
Then System Restore to Date/Time before issue started:
Start/All Programs/Accessories/System Tools/System Restore

Otherwise perform a Repair Installation:
http://www3.telus.net/dandemar/repaxp.htm

When you are ready for SP-2, follow the Service Pack Installation
Checklist:
http://www3.telus.net/dandemar/spackins.htm

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"Fire" > wrote in message
...
>I recently installed SP2. when i restarted the computer afterwards,
>it kept
> freezing. So i decided it wasnt a good idea for my computer, and i
> put it
> into safe mode and tried to do a system restore. while it was
> restoring
> files, my computer froze on a certain spot, and stayed there for 20
> minutes.
> i shut it off and turned it back on in hope of trying it again. but
> what
> came up was not pretty.
> My computer would start and then go to a black screen that says
> something
> along the lines of "your computer was not shut down properly, please
> click on
> one of the following types..." it gave me safe mode, safe mode
> w/networking,
> safe mode w/command prompt, good local config setting, and start
> windows
> normally. ive tried all five, and what happens it starts to try and
> load, a
> blue screen w/words flashes and restarts it all over again. i do
> not know
> what happened and i need help. what should i do?