PDA

View Full Version : Cannot mount blank floppy for ASR backup


ben schwartz
December 5th 03, 01:42 AM
At 2000 updated to XP+SP1+all updates.
ASR backup is successful until blank floppy must be
mounted. No formatted blank floppy is acceptable. Not
critical problem since the same rejected floppy can be
used by following Q299526 after the fact.
ASR did not fail this way before updates (21, including
10 critical) were applied.

ben schwartz
December 5th 03, 01:44 AM
The reason I posted this was not just to give a circumvention but to find
out if anyone else has seen this and, if so, whether it is a known bug or
common user error. Or: should I have posted this someplace else?

"ben schwartz" > wrote in message
...
> At 2000 updated to XP+SP1+all updates.
> ASR backup is successful until blank floppy must be
> mounted. No formatted blank floppy is acceptable. Not
> critical problem since the same rejected floppy can be
> used by following Q299526 after the fact.
> ASR did not fail this way before updates (21, including
> 10 critical) were applied.

ben schwartz
December 5th 03, 01:45 AM
Thanks Sharon. I will post it there.
"Sharon F" > wrote in message
...
> On Thu, 3 Jul 2003 07:00:14 -0700, "ben schwartz"
> > wrote:
>
> >At 2000 updated to XP+SP1+all updates.
> >ASR backup is successful until blank floppy must be
> >mounted. No formatted blank floppy is acceptable. Not
> >critical problem since the same rejected floppy can be
> >used by following Q299526 after the fact.
> >ASR did not fail this way before updates (21, including
> >10 critical) were applied.
>
> Personally, I haven't seen it, Ben. Nor have I read any other posts in
> the MS newsgroups that mention the same problem. May be a fluke or a
> problem only a few have run into. May want to post this again over in
> windowsxp.perform_maintain. May get more responses than you would in the
> windowsxp.basics newsgroup.
>
> Sharon F
> MS MVP [Shell/User]
>

Google