Bobbie Harder \(MS\)
April 15th 03, 12:54 AM
Hi All- Ive been investigating this problem and it might be associated to
mis-matched binaries. The SP1 version of srstr.dll requires the SP1 version
of winsta.dll. If you have installed some of the SR patches directly on the
XP version, there might be a missing dependancy check. Try installing XP
SP1 to fix this and let me know if this helps-
--
"This posting is provided "As Is" with no warranties, and confers no
rights."
To learn more about System Restore see our FAQ at:
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/itcommuni
ty/Newsgroups/FAQSRWXP.asp
"kurt" > wrote in message
...
>
> I recall being in the safe boot mode and not finding the
> restore function .... are you sure you are booting in
> normally ?
>
> "Start>run>msconfig" to check. Should have "normal"
> selected I believe.
>
> Kurt.
>
> >-----Original Message-----
> >I reinstalled XP to se if it would solve my problem - my
> cds are not
> >playing - and the system restore has simply vanished from
> the pc's hardware
> >properties.
> >
> >However, it is still running in the background.
> >
> >I tried the above fix from cmd prompt and made no
> difference.
> >
> >Anyone any further suggestions.
> >
> >Very much appreciated :0)
> >
> >Ivan
> >
> >--
> >
> >
> >
> >
> >"Andrew E." > wrote in message
> ...
> >> Try opening cmd prompt,at the curser type:Sfc /Scannow
> >> Press enter on keyboard,install windows xp cd,exit the
> >> install page,when the graph bar is finished running the
> >> utility is through,remove cd,type:EXIT Re-start
> comput-
> >> er.
> >> >-----Original Message-----
> >> >Even though the System Restore is still listed in
> >> >the "System Tools" folder, it no longer works. A page
> >> >comes up and says "The procedure entry point Remote
> >> >AssistancePrepare SystemRestore could not be located in
> >> >the dynamic link library WINSTA.dll" I am not trying
> to
> >> >use Remote Assistance! Also, the "System Resotre" tab
> >> >has disappeared from the "System" page in the Control
> >> >Panel options!!! I used it 3 weeks ago, it worked fine
> >> >and it was listed in the "System" option, the tab was
> >> >surely there!!!
> >> >.
> >> >
> >
> >
> >---
> >Outgoing mail is certified Virus Free.
> >Checked by AVG anti-virus system (http://www.grisoft.com).
> >Version: 6.0.467 / Virus Database: 266 - Release Date:
> 01/04/2003
> >
> >
> >.
> >
mis-matched binaries. The SP1 version of srstr.dll requires the SP1 version
of winsta.dll. If you have installed some of the SR patches directly on the
XP version, there might be a missing dependancy check. Try installing XP
SP1 to fix this and let me know if this helps-
--
"This posting is provided "As Is" with no warranties, and confers no
rights."
To learn more about System Restore see our FAQ at:
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/itcommuni
ty/Newsgroups/FAQSRWXP.asp
"kurt" > wrote in message
...
>
> I recall being in the safe boot mode and not finding the
> restore function .... are you sure you are booting in
> normally ?
>
> "Start>run>msconfig" to check. Should have "normal"
> selected I believe.
>
> Kurt.
>
> >-----Original Message-----
> >I reinstalled XP to se if it would solve my problem - my
> cds are not
> >playing - and the system restore has simply vanished from
> the pc's hardware
> >properties.
> >
> >However, it is still running in the background.
> >
> >I tried the above fix from cmd prompt and made no
> difference.
> >
> >Anyone any further suggestions.
> >
> >Very much appreciated :0)
> >
> >Ivan
> >
> >--
> >
> >
> >
> >
> >"Andrew E." > wrote in message
> ...
> >> Try opening cmd prompt,at the curser type:Sfc /Scannow
> >> Press enter on keyboard,install windows xp cd,exit the
> >> install page,when the graph bar is finished running the
> >> utility is through,remove cd,type:EXIT Re-start
> comput-
> >> er.
> >> >-----Original Message-----
> >> >Even though the System Restore is still listed in
> >> >the "System Tools" folder, it no longer works. A page
> >> >comes up and says "The procedure entry point Remote
> >> >AssistancePrepare SystemRestore could not be located in
> >> >the dynamic link library WINSTA.dll" I am not trying
> to
> >> >use Remote Assistance! Also, the "System Resotre" tab
> >> >has disappeared from the "System" page in the Control
> >> >Panel options!!! I used it 3 weeks ago, it worked fine
> >> >and it was listed in the "System" option, the tab was
> >> >surely there!!!
> >> >.
> >> >
> >
> >
> >---
> >Outgoing mail is certified Virus Free.
> >Checked by AVG anti-virus system (http://www.grisoft.com).
> >Version: 6.0.467 / Virus Database: 266 - Release Date:
> 01/04/2003
> >
> >
> >.
> >