PDA

View Full Version : hal.dll missing or corrupt after contecting in a Pioneer DVR-A03 RW


mike
April 26th 03, 05:51 PM
>-----Original Message-----
>I would like some assitance with a hal.dll missing or
>corrupt error, please reinstall" error I recieved after
>connecting a Pioneer DVR-A03 RW.
>
>I have a Compaq persario computer that has been
>reformatted numerous times and therefore the orginal
>software is gone. I am running a dual boot system with 2
>separate hard drives one with XP the other with 98SE. both
>hard drives are master on their respective IDE cable and
>prior to connecting the DVD RW I had a TDK CD/RW
>connected. I shut down the computer and after connecting
>the DVD RW to the system attempted to boot in XP, however,
>I recieved the mentioned error. On restart I selected the
>98SE boot and it works fine. Any suggestions on recovering
>from the hal.dll error in XP? I've tried the KB article
>289022 - negative results. I've attempted the fixes
>mentioned in www.kellys-korner-
>xp.com/xp_haldll_missing.htm - no luck either!
>
>Thanks in advance.
>.
>Just try system restore.
Or if that fails just re boot a couple of times for some
reason I was getting the same message a few months ago so I
re-booted comp a few times and haven't had message since.
Not sure but I think that the system was having trouble
locating hal.dll file.

Google