Startup error - Load=Load= [Archive]

View Full Version : Startup error - Load=Load=

Guy Hocking

April 28th 03, 02:17 PM

Hello People

I have recently upgraded a computer - P3 450 - to Windows XP Professional
from 98SE.

All went very smoothly apart from, when i start up the machine, whilst
booting up Windows it produces 3 error messages.
I have searched the MS knowledge base and read NO articles as their doesnt
seem to be any..............no joy

error message 1.
Cannot find Load=Load= as specified in the registry

error message 2.
much the same as 1 but a application error

error message 3.
Insufficient memory to run this application, please quit and try again.

I have checked the event viewer - which gave the following True Vector
errors

Event Type: Error
Event Source: True Vector Engine
Event Category: None
Event ID: 1
Date: 28/04/2003
Time: 08:25:51
User: N/A
Computer: GUY1
Description:
The description for Event ID ( 1 ) in Source ( True Vector Engine ) cannot
be found. The local computer may not have the necessary registry information
or message DLL files to display messages from a remote computer. You may be
able to use the /AUXSOURCE= flag to retrieve this description; see Help and
Support for details. The following information is part of the event: .
Data:
0000: 46 69 6c 65 20 22 43 3a File "C:
0008: 5c 57 49 4e 44 4f 57 53 \WINDOWS
0010: 5c 49 6e 74 65 72 6e 65 \Interne
0018: 74 20 4c 6f 67 73 5c 47 t Logs\G
0020: 55 59 31 2e 6c 64 62 22 UY1.ldb"
0028: 20 77 61 73 20 63 6f 72 was cor
0030: 72 75 70 74 20 61 6e 64 rupt and
0038: 20 68 61 73 20 62 65 65 has bee
0040: 6e 20 64 65 6c 65 74 65 n delete
0048: 64 2e 00 d..

I cannot see any other relevant errors in the event viewer.

Does anybody know why this is happening and where the value Load=Load= is
located in the registry?

Really stuck on this one, the machine is running ok, just concerned about
these errors.

Thanks in advance for ANY clues/help

--
Guy Hocking
BradFlack.com
IT Support Technician

Nicholas

April 28th 03, 02:25 PM

Guy Hocking

April 28th 03, 02:26 PM

O by the way,

I have also upgraded the memory from 128mb to 512mb SDRAM, still the
insufficient memory message.......mmmm

--
Guy Hocking
BradFlack.com
IT Support Technician

"Guy Hocking" > wrote in message
...
> Hello People
>
> I have recently upgraded a computer - P3 450 - to Windows XP Professional
> from 98SE.
>
> All went very smoothly apart from, when i start up the machine, whilst
> booting up Windows it produces 3 error messages.
> I have searched the MS knowledge base and read NO articles as their doesnt
> seem to be any..............no joy
>
> error message 1.
> Cannot find Load=Load= as specified in the registry
>
> error message 2.
> much the same as 1 but a application error
>
> error message 3.
> Insufficient memory to run this application, please quit and try again.
>
> I have checked the event viewer - which gave the following True Vector
> errors
>
> Event Type: Error
> Event Source: True Vector Engine
> Event Category: None
> Event ID: 1
> Date: 28/04/2003
> Time: 08:25:51
> User: N/A
> Computer: GUY1
> Description:
> The description for Event ID ( 1 ) in Source ( True Vector Engine ) cannot
> be found. The local computer may not have the necessary registry
information
> or message DLL files to display messages from a remote computer. You may
be
> able to use the /AUXSOURCE= flag to retrieve this description; see Help
and
> Support for details. The following information is part of the event: .
> Data:
> 0000: 46 69 6c 65 20 22 43 3a File "C:
> 0008: 5c 57 49 4e 44 4f 57 53 \WINDOWS
> 0010: 5c 49 6e 74 65 72 6e 65 \Interne
> 0018: 74 20 4c 6f 67 73 5c 47 t Logs\G
> 0020: 55 59 31 2e 6c 64 62 22 UY1.ldb"
> 0028: 20 77 61 73 20 63 6f 72 was cor
> 0030: 72 75 70 74 20 61 6e 64 rupt and
> 0038: 20 68 61 73 20 62 65 65 has bee
> 0040: 6e 20 64 65 6c 65 74 65 n delete
> 0048: 64 2e 00 d..
>
> I cannot see any other relevant errors in the event viewer.
>
> Does anybody know why this is happening and where the value Load=Load= is
> located in the registry?
>
> Really stuck on this one, the machine is running ok, just concerned about
> these errors.
>
> Thanks in advance for ANY clues/help
>
> --
> Guy Hocking
> BradFlack.com
> IT Support Technician
>
>

Guy Hocking

April 28th 03, 02:36 PM

Thanks for the response.

I do have ZoneAlarm installed,

But this was happening before i had Broadband / ZoneAlarm firewall, any
other apps that could be causing the errors?
--
Guy Hocking
BradFlack.com
IT Support Technician

"Guy Hocking" > wrote in message
...
> O by the way,
>
> I have also upgraded the memory from 128mb to 512mb SDRAM, still the
> insufficient memory message.......mmmm
>
> --
> Guy Hocking
> BradFlack.com
> IT Support Technician
>
>
> "Guy Hocking" > wrote in message
> ...
> > Hello People
> >
> > I have recently upgraded a computer - P3 450 - to Windows XP
Professional
> > from 98SE.
> >
> > All went very smoothly apart from, when i start up the machine, whilst
> > booting up Windows it produces 3 error messages.
> > I have searched the MS knowledge base and read NO articles as their
doesnt
> > seem to be any..............no joy
> >
> > error message 1.
> > Cannot find Load=Load= as specified in the registry
> >
> > error message 2.
> > much the same as 1 but a application error
> >
> > error message 3.
> > Insufficient memory to run this application, please quit and try again.
> >
> > I have checked the event viewer - which gave the following True Vector
> > errors
> >
> > Event Type: Error
> > Event Source: True Vector Engine
> > Event Category: None
> > Event ID: 1
> > Date: 28/04/2003
> > Time: 08:25:51
> > User: N/A
> > Computer: GUY1
> > Description:
> > The description for Event ID ( 1 ) in Source ( True Vector Engine )
cannot
> > be found. The local computer may not have the necessary registry
> information
> > or message DLL files to display messages from a remote computer. You may
> be
> > able to use the /AUXSOURCE= flag to retrieve this description; see Help
> and
> > Support for details. The following information is part of the event: .
> > Data:
> > 0000: 46 69 6c 65 20 22 43 3a File "C:
> > 0008: 5c 57 49 4e 44 4f 57 53 \WINDOWS
> > 0010: 5c 49 6e 74 65 72 6e 65 \Interne
> > 0018: 74 20 4c 6f 67 73 5c 47 t Logs\G
> > 0020: 55 59 31 2e 6c 64 62 22 UY1.ldb"
> > 0028: 20 77 61 73 20 63 6f 72 was cor
> > 0030: 72 75 70 74 20 61 6e 64 rupt and
> > 0038: 20 68 61 73 20 62 65 65 has bee
> > 0040: 6e 20 64 65 6c 65 74 65 n delete
> > 0048: 64 2e 00 d..
> >
> > I cannot see any other relevant errors in the event viewer.
> >
> > Does anybody know why this is happening and where the value Load=Load=
is
> > located in the registry?
> >
> > Really stuck on this one, the machine is running ok, just concerned
about
> > these errors.
> >
> > Thanks in advance for ANY clues/help
> >
> > --
> > Guy Hocking
> > BradFlack.com
> > IT Support Technician
> >
> >
>
>

Nicholas

April 28th 03, 02:58 PM

Roger Abell {MVP}

April 28th 03, 03:39 PM

You could use msconfig to examine what is set to load at=20
startup, and then work from there by seeing which of them=20
is not getting started. It sound like a program that was=20
installed but that was not upgradable.

--=20
Roger Abell
MS MVP (Security, Windows), MCDBA, MCSE both
Associate Expert - Windows XP ExpertZone
http://www.microsoft.com/windowsxp/expertzone

"Guy Hocking" > wrote in message =
...
> Hello People
>=20
> I have recently upgraded a computer - P3 450 - to Windows XP =
Professional
> from 98SE.
>=20
> All went very smoothly apart from, when i start up the machine, whilst
> booting up Windows it produces 3 error messages.
> I have searched the MS knowledge base and read NO articles as their =
doesnt
> seem to be any..............no joy
>=20
> error message 1.
> Cannot find Load=3DLoad=3D as specified in the registry
>=20
> error message 2.
> much the same as 1 but a application error
>=20
> error message 3.
> Insufficient memory to run this application, please quit and try =
again.
>=20
> I have checked the event viewer - which gave the following True Vector
> errors
>=20
> Event Type: Error
> Event Source: True Vector Engine
> Event Category: None
> Event ID: 1
> Date: 28/04/2003
> Time: 08:25:51
> User: N/A
> Computer: GUY1
> Description:
> The description for Event ID ( 1 ) in Source ( True Vector Engine ) =
cannot
> be found. The local computer may not have the necessary registry =
information
> or message DLL files to display messages from a remote computer. You =
may be
> able to use the /AUXSOURCE=3D flag to retrieve this description; see =
Help and
> Support for details. The following information is part of the event: .
> Data:
> 0000: 46 69 6c 65 20 22 43 3a File "C:
> 0008: 5c 57 49 4e 44 4f 57 53 \WINDOWS
> 0010: 5c 49 6e 74 65 72 6e 65 \Interne
> 0018: 74 20 4c 6f 67 73 5c 47 t Logs\G
> 0020: 55 59 31 2e 6c 64 62 22 UY1.ldb"
> 0028: 20 77 61 73 20 63 6f 72 was cor
> 0030: 72 75 70 74 20 61 6e 64 rupt and
> 0038: 20 68 61 73 20 62 65 65 has bee
> 0040: 6e 20 64 65 6c 65 74 65 n delete
> 0048: 64 2e 00 d..
>=20
> I cannot see any other relevant errors in the event viewer.
>=20
> Does anybody know why this is happening and where the value =
Load=3DLoad=3D is
> located in the registry?
>=20
> Really stuck on this one, the machine is running ok, just concerned =
about
> these errors.
>=20
> Thanks in advance for ANY clues/help
>=20
> --
> Guy Hocking
> BradFlack.com
> IT Support Technician
>=20
>

Dan DeStefano

April 28th 03, 03:51 PM

the first thing i would do is check the following: click start>run and type
"msconfig" and hit 'enter' (you must be logged on as administrator or
equivalent account). this will bring up the 'system configuration utility'.
search for the "Load=Load=" entry in the 'system.ini', 'win.ini' and
'startup' tabs (this is unlikely to be in the services or boot.ini tabs).
once you find the entry, uncheck the box next to it in order to stop it from
loading upon system boot. you may also want to go into the 'startup' tab and
disable anything you do not wish to load on startup - this is a good idea
because the more processes (programs) that are running in the background,
the slower your system will be.

Dan DeStefano

"Guy Hocking" > wrote in message
...
> Hello People
>
> I have recently upgraded a computer - P3 450 - to Windows XP Professional
> from 98SE.
>
> All went very smoothly apart from, when i start up the machine, whilst
> booting up Windows it produces 3 error messages.
> I have searched the MS knowledge base and read NO articles as their doesnt
> seem to be any..............no joy
>
> error message 1.
> Cannot find Load=Load= as specified in the registry
>
> error message 2.
> much the same as 1 but a application error
>
> error message 3.
> Insufficient memory to run this application, please quit and try again.
>
> I have checked the event viewer - which gave the following True Vector
> errors
>
> Event Type: Error
> Event Source: True Vector Engine
> Event Category: None
> Event ID: 1
> Date: 28/04/2003
> Time: 08:25:51
> User: N/A
> Computer: GUY1
> Description:
> The description for Event ID ( 1 ) in Source ( True Vector Engine ) cannot
> be found. The local computer may not have the necessary registry
information
> or message DLL files to display messages from a remote computer. You may
be
> able to use the /AUXSOURCE= flag to retrieve this description; see Help
and
> Support for details. The following information is part of the event: .
> Data:
> 0000: 46 69 6c 65 20 22 43 3a File "C:
> 0008: 5c 57 49 4e 44 4f 57 53 \WINDOWS
> 0010: 5c 49 6e 74 65 72 6e 65 \Interne
> 0018: 74 20 4c 6f 67 73 5c 47 t Logs\G
> 0020: 55 59 31 2e 6c 64 62 22 UY1.ldb"
> 0028: 20 77 61 73 20 63 6f 72 was cor
> 0030: 72 75 70 74 20 61 6e 64 rupt and
> 0038: 20 68 61 73 20 62 65 65 has bee
> 0040: 6e 20 64 65 6c 65 74 65 n delete
> 0048: 64 2e 00 d..
>
> I cannot see any other relevant errors in the event viewer.
>
> Does anybody know why this is happening and where the value Load=Load= is
> located in the registry?
>
> Really stuck on this one, the machine is running ok, just concerned about
> these errors.
>
> Thanks in advance for ANY clues/help
>
> --
> Guy Hocking
> BradFlack.com
> IT Support Technician
>
>