Starz_Kid
December 11th 03, 09:26 PM
Hello Tom P. Let me ask this just to be sure...
This is what is there: 0x00000000 (0)
Should I just change the (0) to (1) or should it end up looking like "0x1"
with all the 0's deleted?????????
I want to be absolutely sure!!!!!!!
Thanks...
Starz_Kid...
"Tom Porterfield" > wrote in message
...
> Double click the EnableBigLba value and change the Value data from 0 to 1.
>
> --
> Tom Porterfield
> Windows XP / Smart Display MVP
> http://mywebpages.comcast.net/tp.porterfield/support
>
> Please post all follow-ups to the newsgroup only.
>
> "Starz_Kid" > wrote in message
> ...
> > Hello Group, I'm trying to use MS article 303013 to enable LBA by
> editing
> > the registry key:
> >
> > "hkey_local_machine\system\currentcontrolset\servic es\atapi\parameters"
> >
> > and the Info in the article DOES NOT match what I see in Windows-XP
> Pro -
> > Reg-Edit version 5.1 (yes - I do have SP! installed).
> >
> > ******
> >
> > I can locate the above key, and I can add the value mentioned in the
> > article, although I have to add the data type first, then add the
> > "EnableBigLba" - BUT, the value data appears as: 0x00000000 (0)
> >
> > The article says to add a Value data: "0x1" AND I CANNOT figure out how
> to
> > do this????
> > How do I change 0x00000000 (0) to 0x1??
> > What have I MISSED???????
> >
> > Thanks for any info....
> >
> > Starz_Kid...
> >
> >
> >
>
>
This is what is there: 0x00000000 (0)
Should I just change the (0) to (1) or should it end up looking like "0x1"
with all the 0's deleted?????????
I want to be absolutely sure!!!!!!!
Thanks...
Starz_Kid...
"Tom Porterfield" > wrote in message
...
> Double click the EnableBigLba value and change the Value data from 0 to 1.
>
> --
> Tom Porterfield
> Windows XP / Smart Display MVP
> http://mywebpages.comcast.net/tp.porterfield/support
>
> Please post all follow-ups to the newsgroup only.
>
> "Starz_Kid" > wrote in message
> ...
> > Hello Group, I'm trying to use MS article 303013 to enable LBA by
> editing
> > the registry key:
> >
> > "hkey_local_machine\system\currentcontrolset\servic es\atapi\parameters"
> >
> > and the Info in the article DOES NOT match what I see in Windows-XP
> Pro -
> > Reg-Edit version 5.1 (yes - I do have SP! installed).
> >
> > ******
> >
> > I can locate the above key, and I can add the value mentioned in the
> > article, although I have to add the data type first, then add the
> > "EnableBigLba" - BUT, the value data appears as: 0x00000000 (0)
> >
> > The article says to add a Value data: "0x1" AND I CANNOT figure out how
> to
> > do this????
> > How do I change 0x00000000 (0) to 0x1??
> > What have I MISSED???????
> >
> > Thanks for any info....
> >
> > Starz_Kid...
> >
> >
> >
>
>