"Blue Screen" on DXDIAG....help needed!

[Steve]

Using
WinXP SP1
ASUS A7V KT133 MBoard Bios V1011
ABIT Siluro Geforce2 MX400 w\Nvidia Detonator Driver v29.42
786MB Physical SDRAM PC133
DirectX8.1, and recently Upgraded to 9.0a

Problem

If I run dxdiag and test Direct Draw my PC "Blue Screens" with a pretty
generic error. It doesn't tell me a driver that failed or anything.

How can I narrow this down to either MBoard, Vid Card, OS....I did upgrade
dx but still same outcome.

Any help would be greatly appreciated

steve

[Nicholas]

Uninstall your current GeForce drivers, then install "certified" =
drivers.

Download and install a certified driver for your NVIDIA video card:
http://www.nvidia.com/view.asp?IO=3Dwinxp-2k_40.72


Open XP's "Help and Support" and type: DIRECTX , and hit enter.
Then click on "Troubleshooting DirectX".


--=20
Nicholas

-------------------------------------------------------------------------=
---------------------

"Steve" > wrote in message:
.. .

| Using
| WinXP SP1
| ASUS A7V KT133 MBoard Bios V1011
| ABIT Siluro Geforce2 MX400 w\Nvidia Detonator Driver v29.42
| 786MB Physical SDRAM PC133
| DirectX8.1, and recently Upgraded to 9.0a
|=20
| Problem
|=20
| If I run dxdiag and test Direct Draw my PC "Blue Screens" with a =
pretty
| generic error. It doesn't tell me a driver that failed or anything.
|=20
| How can I narrow this down to either MBoard, Vid Card, OS....I did =
upgrade
| dx but still same outcome.
|=20
| Any help would be greatly appreciated
|=20
| steve