Compaq Presario 5BW130 & Intel (r) 81082E Graphics Controller

[Marcos_NJ]

I know, I know, the system is old as dirt, but it has served me well. I have
a Celeron 667mhz processor, 512MB RAM, a 17GB hDD, and had Windows XP Pro SP2
installed.

I reinstaleld SP2 and now the Graphics controller gives the error code 41.

It does not give an error message when running in safe mode, but does in
regular mode. At any rate I can't change the monitor settings.

HEELLLlPPPP!!!!

[Cari \(MS-MVP\)]

See:
http://support.microsoft.com/default.aspx?scid=kb;en-us;310123&Product=winxp#XSLTH3588121122120121120120
--
Cari (MS-MVP)
Printing & Imaging



"Marcos_NJ" > wrote in message
...
>I know, I know, the system is old as dirt, but it has served me well. I
>have
> a Celeron 667mhz processor, 512MB RAM, a 17GB hDD, and had Windows XP Pro
> SP2
> installed.
>
> I reinstaleld SP2 and now the Graphics controller gives the error code 41.
>
> It does not give an error message when running in safe mode, but does in
> regular mode. At any rate I can't change the monitor settings.
>
> HEELLLlPPPP!!!!

[Marcos_NJ]

I've been through that. Downloaded the latest version from Intel's web site.
And it still comes back the same Code (41) error.

"Cari (MS-MVP)" wrote:

> See:
> http://support.microsoft.com/default.aspx?scid=kb;en-us;310123&Product=winxp#XSLTH3588121122120121120120
> --
> Cari (MS-MVP)
> Printing & Imaging
>
>
>
> "Marcos_NJ" > wrote in message
> ...
> >I know, I know, the system is old as dirt, but it has served me well. I
> >have
> > a Celeron 667mhz processor, 512MB RAM, a 17GB hDD, and had Windows XP Pro
> > SP2
> > installed.
> >
> > I reinstaleld SP2 and now the Graphics controller gives the error code 41.
> >
> > It does not give an error message when running in safe mode, but does in
> > regular mode. At any rate I can't change the monitor settings.
> >
> > HEELLLlPPPP!!!!
>
>
>

[Cari \(MS-MVP\)]

Did you install the motherboard chipset drivers? Did you check Compaq's
website (now www.hp.com)
--
Cari (MS-MVP)
Printing & Imaging



"Marcos_NJ" > wrote in message
...
> I've been through that. Downloaded the latest version from Intel's web
> site.
> And it still comes back the same Code (41) error.
>
> "Cari (MS-MVP)" wrote:
>
>> See:
>> http://support.microsoft.com/default.aspx?scid=kb;en-us;310123&Product=winxp#XSLTH3588121122120121120120
>> --
>> Cari (MS-MVP)
>> Printing & Imaging
>>
>>
>>
>> "Marcos_NJ" > wrote in message
>> ...
>> >I know, I know, the system is old as dirt, but it has served me well. I
>> >have
>> > a Celeron 667mhz processor, 512MB RAM, a 17GB hDD, and had Windows XP
>> > Pro
>> > SP2
>> > installed.
>> >
>> > I reinstaleld SP2 and now the Graphics controller gives the error code
>> > 41.
>> >
>> > It does not give an error message when running in safe mode, but does
>> > in
>> > regular mode. At any rate I can't change the monitor settings.
>> >
>> > HEELLLlPPPP!!!!
>>
>>
>>

[Marcos_NJ]

I ended up reinstalling Windows XP Pro to a different directory, and
re-installing all my apps. Then after I had the system stable, I upgraded to
XP SP2. Everything is working fine, including the Intel (4) 81082E Graphics
Controller.

"Cari (MS-MVP)" wrote:

> Did you install the motherboard chipset drivers? Did you check Compaq's
> website (now www.hp.com)
> --
> Cari (MS-MVP)
> Printing & Imaging
>
>
>
> "Marcos_NJ" > wrote in message
> ...
> > I've been through that. Downloaded the latest version from Intel's web
> > site.
> > And it still comes back the same Code (41) error.
> >
> > "Cari (MS-MVP)" wrote:
> >
> >> See:
> >> http://support.microsoft.com/default.aspx?scid=kb;en-us;310123&Product=winxp#XSLTH3588121122120121120120
> >> --
> >> Cari (MS-MVP)
> >> Printing & Imaging
> >>
> >>
> >>
> >> "Marcos_NJ" > wrote in message
> >> ...
> >> >I know, I know, the system is old as dirt, but it has served me well. I
> >> >have
> >> > a Celeron 667mhz processor, 512MB RAM, a 17GB hDD, and had Windows XP
> >> > Pro
> >> > SP2
> >> > installed.
> >> >
> >> > I reinstaleld SP2 and now the Graphics controller gives the error code
> >> > 41.
> >> >
> >> > It does not give an error message when running in safe mode, but does
> >> > in
> >> > regular mode. At any rate I can't change the monitor settings.
> >> >
> >> > HEELLLlPPPP!!!!
> >>
> >>
> >>
>
>
>

[Cari \(MS-MVP\)]

Oh well, glad you got it working. Remember to defrag the drive after
installing SP2.
--
Cari (MS-MVP)
Printing & Imaging



"Marcos_NJ" > wrote in message
...
>I ended up reinstalling Windows XP Pro to a different directory, and
> re-installing all my apps. Then after I had the system stable, I upgraded
> to
> XP SP2. Everything is working fine, including the Intel (4) 81082E
> Graphics
> Controller.
>
> "Cari (MS-MVP)" wrote:
>
>> Did you install the motherboard chipset drivers? Did you check Compaq's
>> website (now www.hp.com)
>> --
>> Cari (MS-MVP)
>> Printing & Imaging
>>
>>
>>
>> "Marcos_NJ" > wrote in message
>> ...
>> > I've been through that. Downloaded the latest version from Intel's web
>> > site.
>> > And it still comes back the same Code (41) error.
>> >
>> > "Cari (MS-MVP)" wrote:
>> >
>> >> See:
>> >> http://support.microsoft.com/default.aspx?scid=kb;en-us;310123&Product=winxp#XSLTH3588121122120121120120
>> >> --
>> >> Cari (MS-MVP)
>> >> Printing & Imaging
>> >>
>> >>
>> >>
>> >> "Marcos_NJ" > wrote in message
>> >> ...
>> >> >I know, I know, the system is old as dirt, but it has served me well.
>> >> >I
>> >> >have
>> >> > a Celeron 667mhz processor, 512MB RAM, a 17GB hDD, and had Windows
>> >> > XP
>> >> > Pro
>> >> > SP2
>> >> > installed.
>> >> >
>> >> > I reinstaleld SP2 and now the Graphics controller gives the error
>> >> > code
>> >> > 41.
>> >> >
>> >> > It does not give an error message when running in safe mode, but
>> >> > does
>> >> > in
>> >> > regular mode. At any rate I can't change the monitor settings.
>> >> >
>> >> > HEELLLlPPPP!!!!
>> >>
>> >>
>> >>
>>
>>
>>